[PATCH v2 1/2] dt-bindings: power: supply: bq256xx: Add ti,no-thermistor property

[PATCH v2 1/2] dt-bindings: power: supply: bq256xx: Add ti,no-thermistor property

[Hermes Zhang]

Add a new property ti,no-thermistor to indicate that no thermistor is
connected to the TS pin of the chip.

Signed-off-by: Hermes Zhang <chenhuiz@axis.com>
---

Notes:
    v2: change property name to ti,no-thermistor

 .../bindings/power/supply/bq256xx.yaml        | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
index 82f382a7ffb3..ab9ae6ca7700 100644
--- a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
@@ -68,11 +68,30 @@ properties:
       Interrupt sends an active low, 256 μs pulse to host to report the charger
       device status and faults.
 
+  ti,no-thermistor:
+    type: boolean
+    description: |
+      Indicates that no thermistor is connected to the TS pin
+
 required:
   - compatible
   - reg
   - monitored-battery
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,bq25600
+              - ti,bq25601
+              - ti,bq25600d
+              - ti,bq25601d
+    then:
+      properties:
+        ti,no-thermistor: false
+
 additionalProperties: false
 
 examples:
-- 
2.30.2

[PATCH v2 2/2] power: supply: bq256xx: Apply TS_IGNORE from devicetree

[Hermes Zhang]

TS_IGNORE is default off in bq256xx chip. For some HW which doesn't have
the NTC, we need to set TS_IGNORE to 1 to make the charge work. The new
"ti,no-thermistor" is introduced to toggle it.

Signed-off-by: Hermes Zhang <chenhuiz@axis.com>
---

Notes:
    v2: change property name to ti,no-thermistor

 drivers/power/supply/bq256xx_charger.c | 28 ++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/power/supply/bq256xx_charger.c b/drivers/power/supply/bq256xx_charger.c
index 9cf4936440c9..cacaae1d559b 100644
--- a/drivers/power/supply/bq256xx_charger.c
+++ b/drivers/power/supply/bq256xx_charger.c
@@ -41,6 +41,9 @@
 #define BQ256XX_IINDPM_MAX_uA		3200000
 #define BQ256XX_IINDPM_DEF_uA		2400000
 
+#define BQ256XX_TS_IGNORE		BIT(6)
+#define BQ256XX_TS_IGNORE_SHIFT		6
+
 #define BQ256XX_VINDPM_MASK		GENMASK(3, 0)
 #define BQ256XX_VINDPM_STEP_uV		100000
 #define BQ256XX_VINDPM_OFFSET_uV	3900000
@@ -153,6 +156,7 @@
  * @vindpm: input voltage limit
  * @ichg_max: maximum fast charge current
  * @vbatreg_max: maximum charge voltage
+ * @ts_ignore: TS_IGNORE flag
  */
 struct bq256xx_init_data {
 	u32 ichg;
@@ -163,6 +167,7 @@ struct bq256xx_init_data {
 	u32 vindpm;
 	u32 ichg_max;
 	u32 vbatreg_max;
+	bool ts_ignore;
 };
 
 /**
@@ -259,6 +264,7 @@ struct bq256xx_device {
  * @bq256xx_set_iterm: pointer to instance specific set_iterm function
  * @bq256xx_set_iprechg: pointer to instance specific set_iprechg function
  * @bq256xx_set_vindpm: pointer to instance specific set_vindpm function
+ * @bq256xx_set_ts_ignore: pointer to instance specific set_ts_ignore function
  *
  * @bq256xx_def_ichg: default ichg value in microamps
  * @bq256xx_def_iindpm: default iindpm value in microamps
@@ -290,6 +296,7 @@ struct bq256xx_chip_info {
 	int (*bq256xx_set_iterm)(struct bq256xx_device *bq, int iterm);
 	int (*bq256xx_set_iprechg)(struct bq256xx_device *bq, int iprechg);
 	int (*bq256xx_set_vindpm)(struct bq256xx_device *bq, int vindpm);
+	int (*bq256xx_set_ts_ignore)(struct bq256xx_device *bq, bool ts_ignore);
 
 	int bq256xx_def_ichg;
 	int bq256xx_def_iindpm;
@@ -670,6 +677,12 @@ static int bq25601d_set_chrg_volt(struct bq256xx_device *bq, int vbatreg)
 						BQ256XX_VBATREG_BIT_SHIFT);
 }
 
+static int bq256xx_set_ts_ignore(struct bq256xx_device *bq, bool ts_ignore)
+{
+	return regmap_update_bits(bq->regmap, BQ256XX_INPUT_CURRENT_LIMIT,
+				BQ256XX_TS_IGNORE, (ts_ignore ? 1 : 0) << BQ256XX_TS_IGNORE_SHIFT);
+}
+
 static int bq256xx_get_prechrg_curr(struct bq256xx_device *bq)
 {
 	unsigned int prechg_and_term_curr_lim;
@@ -1279,6 +1292,7 @@ static const struct bq256xx_chip_info bq256xx_chip_info_tbl[] = {
 		.bq256xx_get_iterm = bq256xx_get_term_curr,
 		.bq256xx_get_iprechg = bq256xx_get_prechrg_curr,
 		.bq256xx_get_vindpm = bq256xx_get_input_volt_lim,
+		.bq256xx_set_ts_ignore = NULL,
 
 		.bq256xx_set_ichg = bq256xx_set_ichg_curr,
 		.bq256xx_set_iindpm = bq256xx_set_input_curr_lim,
@@ -1316,6 +1330,7 @@ static const struct bq256xx_chip_info bq256xx_chip_info_tbl[] = {
 		.bq256xx_set_iterm = bq256xx_set_term_curr,
 		.bq256xx_set_iprechg = bq256xx_set_prechrg_curr,
 		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
+		.bq256xx_set_ts_ignore = NULL,
 
 		.bq256xx_def_ichg = BQ2560X_ICHG_DEF_uA,
 		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
@@ -1346,6 +1361,7 @@ static const struct bq256xx_chip_info bq256xx_chip_info_tbl[] = {
 		.bq256xx_set_iterm = bq256xx_set_term_curr,
 		.bq256xx_set_iprechg = bq256xx_set_prechrg_curr,
 		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
+		.bq256xx_set_ts_ignore = NULL,
 
 		.bq256xx_def_ichg = BQ2560X_ICHG_DEF_uA,
 		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
@@ -1376,6 +1392,7 @@ static const struct bq256xx_chip_info bq256xx_chip_info_tbl[] = {
 		.bq256xx_set_iterm = bq256xx_set_term_curr,
 		.bq256xx_set_iprechg = bq256xx_set_prechrg_curr,
 		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
+		.bq256xx_set_ts_ignore = NULL,
 
 		.bq256xx_def_ichg = BQ2560X_ICHG_DEF_uA,
 		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
@@ -1406,6 +1423,7 @@ static const struct bq256xx_chip_info bq256xx_chip_info_tbl[] = {
 		.bq256xx_set_iterm = bq256xx_set_term_curr,
 		.bq256xx_set_iprechg = bq256xx_set_prechrg_curr,
 		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
+		.bq256xx_set_ts_ignore = bq256xx_set_ts_ignore,
 
 		.bq256xx_def_ichg = BQ25611D_ICHG_DEF_uA,
 		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
@@ -1436,6 +1454,7 @@ static const struct bq256xx_chip_info bq256xx_chip_info_tbl[] = {
 		.bq256xx_set_iterm = bq25618_619_set_term_curr,
 		.bq256xx_set_iprechg = bq25618_619_set_prechrg_curr,
 		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
+		.bq256xx_set_ts_ignore = bq256xx_set_ts_ignore,
 
 		.bq256xx_def_ichg = BQ25618_ICHG_DEF_uA,
 		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
@@ -1466,6 +1485,7 @@ static const struct bq256xx_chip_info bq256xx_chip_info_tbl[] = {
 		.bq256xx_set_iterm = bq25618_619_set_term_curr,
 		.bq256xx_set_iprechg = bq25618_619_set_prechrg_curr,
 		.bq256xx_set_vindpm = bq256xx_set_input_volt_lim,
+		.bq256xx_set_ts_ignore = bq256xx_set_ts_ignore,
 
 		.bq256xx_def_ichg = BQ25618_ICHG_DEF_uA,
 		.bq256xx_def_iindpm = BQ256XX_IINDPM_DEF_uA,
@@ -1582,6 +1602,12 @@ static int bq256xx_hw_init(struct bq256xx_device *bq)
 	if (ret)
 		return ret;
 
+	if (bq->chip_info->bq256xx_set_ts_ignore) {
+		ret = bq->chip_info->bq256xx_set_ts_ignore(bq, bq->init_data.ts_ignore);
+		if (ret)
+			return ret;
+	}
+
 	power_supply_put_battery_info(bq->charger, bat_info);
 
 	return 0;
@@ -1616,6 +1642,8 @@ static int bq256xx_parse_dt(struct bq256xx_device *bq,
 	if (ret)
 		bq->init_data.iindpm = bq->chip_info->bq256xx_def_iindpm;
 
+	bq->init_data.ts_ignore = device_property_read_bool(bq->dev, "ti,no-thermistor");
+
 	return 0;
 }
 
-- 
2.30.2

Re: [PATCH v2 1/2] dt-bindings: power: supply: bq256xx: Add ti,no-thermistor property

[Krzysztof Kozlowski]

On 23/03/2023 04:30, Hermes Zhang wrote:
> Add a new property ti,no-thermistor to indicate that no thermistor is
> connected to the TS pin of the chip.
> 
> Signed-off-by: Hermes Zhang <chenhuiz@axis.com>
> ---
> 
> Notes:
>     v2: change property name to ti,no-thermistor
> 
>  .../bindings/power/supply/bq256xx.yaml        | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
> index 82f382a7ffb3..ab9ae6ca7700 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
> @@ -68,11 +68,30 @@ properties:
>        Interrupt sends an active low, 256 μs pulse to host to report the charger
>        device status and faults.
>  
> +  ti,no-thermistor:
> +    type: boolean
> +    description: |

You can drop '|'.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof