Re: [PATCH v2 2/2] dmaengine: Add DW AXI DMAC driver

[Eugeniy Paltsev <Eugeniy.Paltsev-HKixBCOQz3hWk0Htik3J/w@public.gmane.org>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 2555 bytes --]

On Tue, 2017-04-25 at 21:12 +0300, Andy Shevchenko wrote:
> On Tue, 2017-04-25 at 15:16 +0000, Eugeniy Paltsev wrote:
> > On Mon, 2017-04-24 at 19:56 +0300, Andy Shevchenko wrote:
> > > On Mon, 2017-04-24 at 15:55 +0000, Eugeniy Paltsev wrote:
> > > > Hi,
> > > > On Fri, 2017-04-21 at 18:13 +0300, Andy Shevchenko wrote:
> > > > > On Fri, 2017-04-21 at 14:29 +0000, Eugeniy Paltsev wrote:
> > > > > > On Tue, 2017-04-18 at 15:31 +0300, Andy Shevchenko wrote:
> > > > > > > On Fri, 2017-04-07 at 17:04 +0300, Eugeniy Paltsev wrote:
> > > > This IP can be (ans is) configured with small block size.
> > > > (note, that I am not saying about runtime HW configuration)
> > > >
> > > > And there is opportunity what we can't use sg_list directly and
> > > > need
> > > > to
> > > > split sg_list to a smaller chunks.
> > >
> > > That's what I have referred quite ago. The driver should provide
> > > an
> > > interface to tell potential caller what maximum block (number of
> > > items
> > > with given bus width) it supports.
> > >
> > > We have struct dma_parms in struct device, but what we actually
> > > need
> > > is
> > > to support similar on per channel basis in DMAengine framework.
> > >
> > > So, instead of working around this I recommend either to
> > > implement
> > > it
> > > properly or rely on the fact that in the future someone
> > > eventually
> > > does that for you.
> > >
> > > Each driver which has this re-splitting mechanism should be
> > > cleaned
> > > up and refactored.
> >
> > I still can't see any pros of this implementation.
> > There is no performance profit: we anyway need to re-splitt sg_list
> > (but now in dma-user driver instead of dma driver)
--->---
> > If we want to use same descriptors several times we just can use
> > DMA_CTRL_REUSE option - the descriptors will be created one time
> > and re-splitting will be сompleted only one time.
>
> There are two type of descriptors: SW and HW. That flag about SW
> descriptor, so, it in most cases has nothing to do with the actual
> entry size.

Hmm, I checked all virt-dma code attentively and I don't see this
limitation.
The only existing limitation I can see is that we can use
DMA_CTRL_REUSE only for channels supporting slave transfers. (But it is
irrelevant to our discussion)

So, we can use DMA_CTRL_REUSE for both HW/SW descriptor types.

--
 Eugeniy PaltsevN‹§²æìr¸›yúèšØb²X¬¶Ç§vØ^–)Þº{.nÇ+‰·zøœzÚÞz)í…æèw*\x1fjg¬±¨\x1e¶‰šŽŠÝ¢j.ïÛ°\½½MŽúgjÌæa×\x02››–' ™©Þ¢¸\f¢·¦j:+v‰¨ŠwèjØm¶Ÿÿ¾\a«‘êçzZ+ƒùšŽŠÝ¢j"ú!¶i