From: Anup Patel <anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
To: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Michael Turquette
<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Cc: Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>,
Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
Jon Mason <jonmason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
Florian Fainelli
<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Oza Pawandeep <oza-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
Srinath Mannam
<srinath.mannam-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
Pramod Kumar
<pramod.kumar-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
Sandeep Tripathy
<sandeep.tripathy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
Anup Patel <anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Subject: [PATCH 00/11] Broadcom Stingray SOC Initial Support
Date: Sat, 6 May 2017 17:24:35 +0530 [thread overview]
Message-ID: <1494071686-19098-1-git-send-email-anup.patel@broadcom.com> (raw)
This patchset adds initial support of Broadcom Stingray SOC
by reusing existing Broadcom iProc device drivers.
Most of the patches in this patchset are DT patches except
the Stingray clock tree support which just one patch.
This patchset is based on Linux-4.11 and it is also available
at stingray-v1 branch of https://github.com/Broadcom/arm64-linux.git
Anup Patel (3):
dt-bindings: bcm: Add Broadcom Stingray bindings document
arm64: dts: Initial DTS files for Broadcom Stingray SOC
arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray
Oza Pawandeep (1):
arm64: dts: Add I2C DT nodes for Stingray SoC
Pramod Kumar (3):
arm64: dts: Add NAND DT nodes for Stingray SOC
arm64: dts: Add pinctrl DT nodes for Stingray SOC
arm64: dts: Add GPIO DT nodes for Stingray SOC
Sandeep Tripathy (3):
dt-bindings: clk: Extend binding doc for Stingray SOC
clk: bcm: Add clocks for Stingray SOC
arm64: dts: Add clock DT nodes for Stingray SOC
Srinath Mannam (1):
arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC
.../devicetree/bindings/arm/bcm/brcm,stingray.txt | 12 +
.../bindings/clock/brcm,iproc-clocks.txt | 76 ++++
arch/arm64/boot/dts/broadcom/Makefile | 1 +
arch/arm64/boot/dts/broadcom/stingray/Makefile | 6 +
.../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 140 +++++++
.../boot/dts/broadcom/stingray/bcm958742k.dts | 78 ++++
.../boot/dts/broadcom/stingray/bcm958742t.dts | 40 ++
.../boot/dts/broadcom/stingray/stingray-clock.dtsi | 162 ++++++++
.../dts/broadcom/stingray/stingray-pinctrl.dtsi | 345 ++++++++++++++++
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 457 +++++++++++++++++++++
drivers/clk/bcm/Kconfig | 8 +
drivers/clk/bcm/Makefile | 1 +
drivers/clk/bcm/clk-sr.c | 300 ++++++++++++++
include/dt-bindings/clock/bcm-sr.h | 101 +++++
.../dt-bindings/pinctrl/brcm,pinctrl-stingray.h | 68 +++
15 files changed, 1795 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/Makefile
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
create mode 100644 drivers/clk/bcm/clk-sr.c
create mode 100644 include/dt-bindings/clock/bcm-sr.h
create mode 100644 include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2017-05-06 11:54 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-06 11:54 Anup Patel [this message]
2017-05-06 11:54 ` [PATCH 01/11] dt-bindings: bcm: Add Broadcom Stingray bindings document Anup Patel
2017-05-12 15:18 ` Rob Herring
2017-05-06 11:54 ` [PATCH 07/11] arm64: dts: Add pinctrl DT nodes for Stingray SOC Anup Patel
2017-05-06 11:54 ` [PATCH 08/11] arm64: dts: Add GPIO " Anup Patel
2017-05-06 11:54 ` [PATCH 09/11] arm64: dts: Add I2C DT nodes for Stingray SoC Anup Patel
[not found] ` <1494071686-19098-1-git-send-email-anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2017-05-06 11:54 ` [PATCH 02/11] dt-bindings: clk: Extend binding doc for Stingray SOC Anup Patel
[not found] ` <1494071686-19098-3-git-send-email-anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2017-05-12 15:21 ` Rob Herring
2017-05-15 5:07 ` Anup Patel
2017-05-06 11:54 ` [PATCH 03/11] clk: bcm: Add clocks " Anup Patel
2017-05-19 1:37 ` Stephen Boyd
2017-05-22 11:53 ` Sandeep Tripathy
2017-05-06 11:54 ` [PATCH 04/11] arm64: dts: Initial DTS files for Broadcom " Anup Patel
[not found] ` <1494071686-19098-5-git-send-email-anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2017-05-07 23:30 ` Florian Fainelli
2017-05-15 5:09 ` Anup Patel
2017-05-08 20:32 ` Scott Branden
[not found] ` <64f4e7c4-d619-2ac2-438b-91d48ea4260b-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2017-05-15 5:11 ` Anup Patel
2017-05-06 11:54 ` [PATCH 05/11] arm64: dts: Add clock DT nodes for " Anup Patel
2017-05-06 11:54 ` [PATCH 06/11] arm64: dts: Add NAND " Anup Patel
2017-05-06 11:54 ` [PATCH 10/11] arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray Anup Patel
2017-05-06 11:54 ` [PATCH 11/11] arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC Anup Patel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1494071686-19098-1-git-send-email-anup.patel@broadcom.com \
--to=anup.patel-dy08kvg/lbpwk0htik3j/w@public.gmane.org \
--cc=bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=jonmason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=oza-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=pramod.kumar-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sandeep.tripathy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=srinath.mannam-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).