From mboxrd@z Thu Jan 1 00:00:00 1970 From: Anup Patel Subject: [PATCH 04/11] arm64: dts: Initial DTS files for Broadcom Stingray SOC Date: Sat, 6 May 2017 17:24:39 +0530 Message-ID: <1494071686-19098-5-git-send-email-anup.patel@broadcom.com> References: <1494071686-19098-1-git-send-email-anup.patel@broadcom.com> Return-path: In-Reply-To: <1494071686-19098-1-git-send-email-anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Rob Herring , Mark Rutland , Michael Turquette Cc: Catalin Marinas , Will Deacon , Ray Jui , Scott Branden , Jon Mason , Florian Fainelli , Oza Pawandeep , Srinath Mannam , Pramod Kumar , Sandeep Tripathy , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org, Anup Patel , Scott Branden List-Id: devicetree@vger.kernel.org The Broadcom Stingray SoC is a new member in Broadcom iProc SoC family. This patch adds initial DTS files for Broadcom Stingray SoC and two of its reference boards (bcm958742k and bcm958742t). We have lot of reference boards and large number of devices in Broadcom Stingray SoC so eventually we will have quite a few DTS files for Stingray. To tackle, we have added a separate directory for Stingray DTS files. Signed-off-by: Anup Patel Signed-off-by: Scott Branden Reviewed-by: Ray Jui --- arch/arm64/boot/dts/broadcom/Makefile | 1 + arch/arm64/boot/dts/broadcom/stingray/Makefile | 6 + .../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 64 +++++ .../boot/dts/broadcom/stingray/bcm958742k.dts | 48 ++++ .../boot/dts/broadcom/stingray/bcm958742t.dts | 40 +++ .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 307 +++++++++++++++++++++ 6 files changed, 466 insertions(+) create mode 100644 arch/arm64/boot/dts/broadcom/stingray/Makefile create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index f1caece..a7c3208 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb +dts-dirs := stingray always := $(dtb-y) subdir-y := $(dts-dirs) clean-files := *.dtb diff --git a/arch/arm64/boot/dts/broadcom/stingray/Makefile b/arch/arm64/boot/dts/broadcom/stingray/Makefile new file mode 100644 index 0000000..f70028e --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/Makefile @@ -0,0 +1,6 @@ +dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742k.dtb +dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742t.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi new file mode 100644 index 0000000..e3a2a36 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi @@ -0,0 +1,64 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016-2017 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * Reserve portion of RAM used by secured firmware + * running in background. + */ +/memreserve/ 0x8f000000 0x00100000; + +#include "stingray.dtsi" + +/ { + chosen { /* Default kernel args */ + bootargs = "root=/dev/ram rw rootwait \ + earlycon=uart8250,mmio32,0x68a10000 \ + pci=pcie_bus_safe cma=64M"; + linux,stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &uart1; + serial1 = &uart0; + serial2 = &uart2; + serial3 = &uart3; + }; +}; + +&memory { /* Default DRAM banks */ + reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */ + <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */ +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts new file mode 100644 index 0000000..c309cda --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts @@ -0,0 +1,48 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016-2017 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm958742-base.dtsi" + +/ { + compatible = "brcm,bcm958742k", "brcm,stingray"; + model = "Stingray Combo SVK (BCM958742K)"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts new file mode 100644 index 0000000..6ebe399 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts @@ -0,0 +1,40 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2017 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm958742-base.dtsi" + +/ { + compatible = "brcm,bcm958742t", "brcm,stingray"; + model = "Stingray SST100 (BCM958742T)"; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi new file mode 100644 index 0000000..f08b37e --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -0,0 +1,307 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015-2017 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include + +/ { + compatible = "brcm,stingray"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@000 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; + }; + + cpu@001 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&CLUSTER1_L2>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&CLUSTER1_L2>; + }; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&CLUSTER2_L2>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x201>; + enable-method = "psci"; + next-level-cache = <&CLUSTER2_L2>; + }; + + cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&CLUSTER3_L2>; + }; + + cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x0 0x301>; + enable-method = "psci"; + next-level-cache = <&CLUSTER3_L2>; + }; + + CLUSTER0_L2: l2-cache@000 { + compatible = "cache"; + }; + + CLUSTER1_L2: l2-cache@100 { + compatible = "cache"; + }; + + CLUSTER2_L2: l2-cache@200 { + compatible = "cache"; + }; + + CLUSTER3_L2: l2-cache@300 { + compatible = "cache"; + }; + }; + + memory: memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x40000000>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + scr { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + gic: interrupt-controller@63c00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + reg = <0x63c00000 0x010000>, /* GICD */ + <0x63e00000 0x600000>; /* GICR */ + interrupts = ; + + gic_its: gic-its@63c20000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x63c20000 0x10000>; + }; + }; + + smmu: mmu@64000000 { + compatible = "arm,mmu-500"; + reg = <0x64000000 0x80000>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + #iommu-cells = <2>; + }; + }; + + hsls { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + uart0: uart@68a00000 { + device_type = "serial"; + compatible = "snps,dw-apb-uart"; + reg = <0x68a00000 0x1000>; + reg-shift = <2>; + clock-frequency = <25000000>; + interrupt-parent = <&gic>; + interrupts = ; + status = "disabled"; + }; + + uart1: uart@68a10000 { + device_type = "serial"; + compatible = "snps,dw-apb-uart"; + reg = <0x68a10000 0x1000>; + reg-shift = <2>; + clock-frequency = <25000000>; + interrupt-parent = <&gic>; + interrupts = ; + status = "disabled"; + }; + + uart2: uart@68a20000 { + device_type = "serial"; + compatible = "snps,dw-apb-uart"; + reg = <0x68a20000 0x1000>; + reg-shift = <2>; + clock-frequency = <25000000>; + interrupt-parent = <&gic>; + interrupts = ; + status = "disabled"; + }; + + uart3: uart@68a30000 { + device_type = "serial"; + compatible = "snps,dw-apb-uart"; + reg = <0x68a30000 0x1000>; + reg-shift = <2>; + clock-frequency = <25000000>; + interrupt-parent = <&gic>; + interrupts = ; + status = "disabled"; + }; + + hwrng: hwrng@68b20000 { + compatible = "brcm,iproc-rng200"; + reg = <0x68b20000 0x28>; + }; + }; +}; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html