[v3, 0/5] Add eSDHC UHS-I/HS200 mode support for ls1012a/ls1046a/ls208xa

[v3, 0/5] Add eSDHC UHS-I/HS200 mode support for ls1012a/ls1046a/ls208xa

[Yangbo Lu]

This patchset is to add eSDHC UHS-I/HS200 mode support for ls1012a/ls1046a/ls208xa.
Also add eSDHC node for ls1088a. Because eSDHC is not a standard SD controller,
the specific speed mode support depends on board's peripheral circuit for eSDHC.
So, we have to add these speed modes support on board dts file.

In additon, these dts patches depends on esdhc driver patches which just had been merged
on mmc.git. Otherwise, the UHS-I SD card and eMMC HS200 card would fail to be initialized,
but other cards still could work fine.
https://patchwork.kernel.org/patch/9689875/
https://patchwork.kernel.org/patch/9689877/
https://patchwork.kernel.org/patch/9689879/
https://patchwork.kernel.org/patch/9689887/
https://patchwork.kernel.org/patch/9689885/

Yangbo Lu (5):
  mmc: dt: add compatible into eSDHC required properties
  arm64: dts: ls1046a: support SD UHS-I and eMMC HS200 on RDB
  arm64: dts: ls208xa: support SD UHS-I on RDB and eMMC HS200 on QDS
  arm64: dts: ls1012a: add eSDHC nodes
  arm64: dts: ls1088a: add esdhc node

 .../devicetree/bindings/mmc/fsl-esdhc.txt          | 14 ++++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts  |  8 +++++++
 arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts  | 13 +++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi     | 25 ++++++++++++++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts  |  8 +++++++
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi     |  4 ++--
 arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts  |  4 ++++
 arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts  |  4 ++++
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi     | 12 +++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi |  1 +
 arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi |  4 ++++
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi     |  2 +-
 12 files changed, 96 insertions(+), 3 deletions(-)

-- 
2.1.0.27.g96db324

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[v3, 1/5] mmc: dt: add compatible into eSDHC required properties

[Yangbo Lu]

This patch is to add compatible into eSDHC required properties.

Signed-off-by: Yangbo Lu <yangbo.lu-3arQi8VN3Tc@public.gmane.org>
---
Changes for v2:
	- Added this patch.
Changes for v3:
	- Added possible comaptible list
---
 Documentation/devicetree/bindings/mmc/fsl-esdhc.txt | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
index dedfb02..a2cf5e1 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt
@@ -7,6 +7,20 @@ This file documents differences between the core properties described
 by mmc.txt and the properties used by the sdhci-esdhc driver.
 
 Required properties:
+  - compatible : should be "fsl,esdhc", or "fsl,<chip>-esdhc".
+    Possible compatibles for PowerPC:
+	"fsl,mpc8536-esdhc"
+	"fsl,mpc8378-esdhc"
+	"fsl,p2020-esdhc"
+	"fsl,p4080-esdhc"
+	"fsl,t1040-esdhc"
+	"fsl,t4240-esdhc"
+    Possible compatibles for ARM:
+	"fsl,ls1012a-esdhc"
+	"fsl,ls1088a-esdhc"
+	"fsl,ls1043a-esdhc"
+	"fsl,ls1046a-esdhc"
+	"fsl,ls2080a-esdhc"
   - interrupt-parent : interrupt source phandle.
   - clock-frequency : specifies eSDHC base clock frequency.
 
-- 
2.1.0.27.g96db324

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [v3, 1/5] mmc: dt: add compatible into eSDHC required properties

[Rob Herring]

On Mon, May 8, 2017 at 9:37 PM, Yangbo Lu <yangbo.lu-3arQi8VN3Tc@public.gmane.org> wrote:
> This patch is to add compatible into eSDHC required properties.
>
> Signed-off-by: Yangbo Lu <yangbo.lu-3arQi8VN3Tc@public.gmane.org>
> ---
> Changes for v2:
>         - Added this patch.
> Changes for v3:
>         - Added possible comaptible list
> ---
>  Documentation/devicetree/bindings/mmc/fsl-esdhc.txt | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[v3, 2/5] arm64: dts: ls1046a: support SD UHS-I and eMMC HS200 on RDB

[Yangbo Lu]

This patch is to enable SD UHS-I mode and eMMC HS200 mode on
LS1046ARDB in dts. Also, the eSDHC peripheral clock must be used
instead of platform clock to support these modes.

Signed-off-by: Yangbo Lu <yangbo.lu-3arQi8VN3Tc@public.gmane.org>
---
Changes for v2:
	- Sorted the node.
Changes for v3:
	- None.
---
 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 8 ++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi    | 4 ++--
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index c5361e9..2d28726 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -72,6 +72,14 @@
 	status = "okay";
 };
 
+&esdhc {
+	mmc-hs200-1_8v;
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 7ef2b9f..5975d30 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -210,10 +210,10 @@
 		};
 
 		esdhc: esdhc@1560000 {
-			compatible = "fsl,esdhc";
+			compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <0>;
+			clocks = <&clockgen 2 1>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
 			big-endian;
-- 
2.1.0.27.g96db324

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[v3, 3/5] arm64: dts: ls208xa: support SD UHS-I on RDB and eMMC HS200 on QDS

[Yangbo Lu]

This patch is to enable SD UHS-I mode on LS208xRDB and eMMC HS200
mode on LS208xQDS in dts. Also, the eSDHC peripheral clock must be
used instead of platform clock to support these modes.

Signed-off-by: Yangbo Lu <yangbo.lu-3arQi8VN3Tc@public.gmane.org>
---
Changes for v2:
	- None.
Changes for v3:
	- None.
---
 arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 1 +
 arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 4 ++++
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi     | 2 +-
 3 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index c4282d9..b237446 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -46,6 +46,7 @@
  */
 
 &esdhc {
+	mmc-hs200-1_8v;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 9a1d0d2..29af54b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -46,6 +46,10 @@
  */
 
 &esdhc {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 6e531b9..94cdd30 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -472,7 +472,7 @@
 			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
 			interrupts = <0 28 0x4>; /* Level high type */
-			clock-frequency = <0>;	/* Updated by bootloader */
+			clocks = <&clockgen 4 1>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
 			little-endian;
-- 
2.1.0.27.g96db324

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[v3, 4/5] arm64: dts: ls1012a: add eSDHC nodes

[Yangbo Lu]

There are two eSDHC controllers in LS1012A. This patch is to add
eSDHC nodes for ls1012a dts. Also enable eSDHC for RDB/QDS boards.

Signed-off-by: Yangbo Lu <yangbo.lu-3arQi8VN3Tc@public.gmane.org>
---
Changes for v2:
	- Sorted the node.
Changes for v3:
	- None.
---
 arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts |  8 ++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 13 ++++++++++++
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi    | 25 +++++++++++++++++++++++
 3 files changed, 46 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index 40ef468..8c013b5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -97,6 +97,14 @@
 	status = "okay";
 };
 
+&esdhc0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
index 65d4313..c1a119e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -54,6 +54,19 @@
 	status = "okay";
 };
 
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index ae47156..9a2ccd8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -117,12 +117,37 @@
 		#size-cells = <2>;
 		ranges;
 
+		esdhc0: esdhc@1560000 {
+			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <0 62 0x4>;
+			clocks = <&clockgen 4 0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
 		scfg: scfg@1570000 {
 			compatible = "fsl,ls1012a-scfg", "syscon";
 			reg = <0x0 0x1570000 0x0 0x10000>;
 			big-endian;
 		};
 
+		esdhc1: esdhc@1580000 {
+			compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1580000 0x0 0x10000>;
+			interrupts = <0 65 0x4>;
+			clocks = <&clockgen 4 0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			broken-cd;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
 		crypto: crypto@1700000 {
 			compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
 				     "fsl,sec-v4.0";
-- 
2.1.0.27.g96db324

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[v3, 5/5] arm64: dts: ls1088a: add esdhc node

[Yangbo Lu]

Add esdhc node for ls1088a and enable it on both RDB and QDS boards.

Signed-off-by: Yangbo Lu <yangbo.lu-3arQi8VN3Tc@public.gmane.org>
---
Changes for v2:
	- Sorted the node.
Changes for v3:
	- None.
---
 arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts |  4 ++++
 arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts |  4 ++++
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi    | 12 ++++++++++++
 3 files changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 8c3cae5..ff21055 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -118,6 +118,10 @@
 	status = "okay";
 };
 
+&esdhc {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 8a04fbb..ab62ef6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -102,6 +102,10 @@
 	status = "okay";
 };
 
+&esdhc {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 2946fd7..10b5775 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -263,6 +263,18 @@
 			status = "disabled";
 		};
 
+		esdhc: esdhc@2140000 {
+			compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2140000 0x0 0x10000>;
+			interrupts = <0 28 0x4>; /* Level high type */
+			clock-frequency = <0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
 		sata: sata@3200000 {
 			compatible = "fsl,ls1088a-ahci", "fsl,ls1043a-ahci";
 			reg = <0x0 0x3200000 0x0 0x10000>;
-- 
2.1.0.27.g96db324

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [v3, 0/5] Add eSDHC UHS-I/HS200 mode support for ls1012a/ls1046a/ls208xa

[Shawn Guo]

On Tue, May 09, 2017 at 10:37:04AM +0800, Yangbo Lu wrote:
> This patchset is to add eSDHC UHS-I/HS200 mode support for ls1012a/ls1046a/ls208xa.
> Also add eSDHC node for ls1088a. Because eSDHC is not a standard SD controller,
> the specific speed mode support depends on board's peripheral circuit for eSDHC.
> So, we have to add these speed modes support on board dts file.
> 
> In additon, these dts patches depends on esdhc driver patches which just had been merged
> on mmc.git. Otherwise, the UHS-I SD card and eMMC HS200 card would fail to be initialized,
> but other cards still could work fine.
> https://patchwork.kernel.org/patch/9689875/
> https://patchwork.kernel.org/patch/9689877/
> https://patchwork.kernel.org/patch/9689879/
> https://patchwork.kernel.org/patch/9689887/
> https://patchwork.kernel.org/patch/9689885/
> 
> Yangbo Lu (5):
>   mmc: dt: add compatible into eSDHC required properties
>   arm64: dts: ls1046a: support SD UHS-I and eMMC HS200 on RDB
>   arm64: dts: ls208xa: support SD UHS-I on RDB and eMMC HS200 on QDS
>   arm64: dts: ls1012a: add eSDHC nodes
>   arm64: dts: ls1088a: add esdhc node

Applied all, thanks.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html