From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ulrich Hecht Subject: [PATCH v3 1/4] ARM: dts: gose: add HDMI input Date: Fri, 19 May 2017 15:07:01 +0200 Message-ID: <1495199224-16337-2-git-send-email-ulrich.hecht+renesas@gmail.com> References: <1495199224-16337-1-git-send-email-ulrich.hecht+renesas@gmail.com> Return-path: In-Reply-To: <1495199224-16337-1-git-send-email-ulrich.hecht+renesas@gmail.com> Sender: linux-media-owner@vger.kernel.org To: linux-renesas-soc@vger.kernel.org, laurent.pinchart@ideasonboard.com Cc: linux-media@vger.kernel.org, geert@linux-m68k.org, magnus.damm@gmail.com, hans.verkuil@cisco.com, niklas.soderlund@ragnatech.se, sergei.shtylyov@cogentembedded.com, horms@verge.net.au, devicetree@vger.kernel.org, Ulrich Hecht List-Id: devicetree@vger.kernel.org Identical to the setup on Koelsch. Signed-off-by: Ulrich Hecht Reviewed-by: Laurent Pinchart --- arch/arm/boot/dts/r8a7793-gose.dts | 68 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 66 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 95e51b7..30f0835 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -253,12 +253,23 @@ }; }; + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; + }; + }; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a"; port { - hdmi_con: endpoint { + hdmi_con_out: endpoint { remote-endpoint = <&adv7511_out>; }; }; @@ -395,6 +406,11 @@ groups = "audio_clk_a"; function = "audio_clk"; }; + + vin0_pins: vin0 { + groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk"; + function = "vin0"; + }; }; ðer { @@ -552,7 +568,34 @@ port@1 { reg = <1>; adv7511_out: endpoint { - remote-endpoint = <&hdmi_con>; + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + hdmi-in@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + interrupt-parent = <&gpio4>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + default-input = <0>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + adv7612_out: endpoint { + remote-endpoint = <&vin0ep2>; }; }; }; @@ -606,3 +649,24 @@ &ssi1 { shared-pin; }; + +/* HDMI video input */ +&vin0 { + status = "okay"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep2: endpoint { + remote-endpoint = <&adv7612_out>; + bus-width = <24>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + data-active = <1>; + }; + }; +}; -- 2.7.4