From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ulrich Hecht Subject: [PATCH v3 3/4] media: adv7180: Add adv7180cp, adv7180st bindings Date: Fri, 19 May 2017 15:07:03 +0200 Message-ID: <1495199224-16337-4-git-send-email-ulrich.hecht+renesas@gmail.com> References: <1495199224-16337-1-git-send-email-ulrich.hecht+renesas@gmail.com> Return-path: In-Reply-To: <1495199224-16337-1-git-send-email-ulrich.hecht+renesas@gmail.com> Sender: linux-media-owner@vger.kernel.org To: linux-renesas-soc@vger.kernel.org, laurent.pinchart@ideasonboard.com Cc: linux-media@vger.kernel.org, geert@linux-m68k.org, magnus.damm@gmail.com, hans.verkuil@cisco.com, niklas.soderlund@ragnatech.se, sergei.shtylyov@cogentembedded.com, horms@verge.net.au, devicetree@vger.kernel.org, Ulrich Hecht List-Id: devicetree@vger.kernel.org To differentiate between two classes of chip packages that have different numbers of input ports. Signed-off-by: Ulrich Hecht --- Documentation/devicetree/bindings/media/i2c/adv7180.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.txt b/Documentation/devicetree/bindings/media/i2c/adv7180.txt index 4da486f..552b6a8 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv7180.txt +++ b/Documentation/devicetree/bindings/media/i2c/adv7180.txt @@ -6,6 +6,8 @@ digital interfaces like MIPI CSI-2 or parallel video. Required Properties : - compatible : value must be one of "adi,adv7180" + "adi,adv7180cp" + "adi,adv7180st" "adi,adv7182" "adi,adv7280" "adi,adv7280-m" @@ -15,6 +17,19 @@ Required Properties : "adi,adv7282" "adi,adv7282-m" +Device nodes of "adi,adv7180cp" and "adi,adv7180st" must contain one +'port' child node per device input and output port, in accordance with the +video interface bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. The port +nodes are numbered as follows. + + Port adv7180cp adv7180st +------------------------------------------------------------------- + Input 0-2 0-5 + Output 3 6 + +The digital output port node must contain at least one endpoint. + Optional Properties : - powerdown-gpios: reference to the GPIO connected to the powerdown pin, if any. -- 2.7.4