From mboxrd@z Thu Jan 1 00:00:00 1970 From: Charles Keepax Subject: [PATCH v2 1/5] gpio: of: Reflect decoupling of open collector and active low/high Date: Tue, 23 May 2017 15:47:28 +0100 Message-ID: <1495550852-3672-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org Cc: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, patches-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org, frowand.list-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, ldewangan-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org List-Id: devicetree@vger.kernel.org Commit 4c0facddb7d8 ("gpio: core: Decouple open drain/source flag with active low/high") decoupled the open collector outputs from active low/high but did not update the documentation. Update the device tree documentation to correctly reflect this new separation between the two concepts. Signed-off-by: Charles Keepax --- New to the series. Thanks, Charles Documentation/devicetree/bindings/gpio/gpio.txt | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt index 2209c16..bccb8623 100644 --- a/Documentation/devicetree/bindings/gpio/gpio.txt +++ b/Documentation/devicetree/bindings/gpio/gpio.txt @@ -74,11 +74,12 @@ GPIO pin number, and GPIO flags as accepted by the "qe_pio_e" gpio-controller. Optional standard bitfield specifiers for the last cell: - Bit 0: 0 means active high, 1 means active low -- Bit 1: 1 means single-ended wiring, see: +- Bit 1: 0 mean push-pull wiring, see: + https://en.wikipedia.org/wiki/Push-pull_output + 1 means single-ended wiring, see: https://en.wikipedia.org/wiki/Single-ended_triode - When used with active-low, this means open drain/collector, see: +- Bit 2: 0 means open-source, 1 means open drain, see: https://en.wikipedia.org/wiki/Open_collector - When used with active-high, this means open source/emitter 1.1) GPIO specifier best practices ---------------------------------- -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html