From: Anup Patel <anup.patel@broadcom.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>
Cc: devicetree@vger.kernel.org,
Florian Fainelli <f.fainelli@gmail.com>,
Sandeep Tripathy <sandeep.tripathy@broadcom.com>,
Anup Patel <anup.patel@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Jon Mason <jonmason@broadcom.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
linux-kernel@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
Pramod Kumar <pramod.kumar@broadcom.com>,
Oza Pawandeep <oza.oza@broadcom.com>, Ray Jui <rjui@broadcom.com>,
Srinath Mannam <srinath.mannam@broadcom.com>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 00/11] Broadcom Stingray SOC Initial Support
Date: Fri, 26 May 2017 14:54:53 +0530 [thread overview]
Message-ID: <1495790704-2438-1-git-send-email-anup.patel@broadcom.com> (raw)
This patchset adds initial support of Broadcom Stingray SOC
by reusing existing Broadcom iProc device drivers.
Most of the patches in this patchset are DT patches except
the Stingray clock tree support which just one patch.
This patchset is based on Linux-4.12-rc2 and it is also available
at stingray-v5 branch of https://github.com/Broadcom/arm64-linux.git
Changes since v4:
- Reduce number of include headers in Stingray clk driver
Changes since v3:
- Rebased patches for Linux-4.12-rc1
- Updated PATCH3 to have all clocks except genpll3 to be
registered via platform driver probe
Changes since v2:
- Remove default bootargs from chosen DT node
- Remove "linux" prefix from stdout DT attribute of chosen DT node
- Remove use of GIC_CPU_MASK_xxx() for PPIs
Changes since v1:
- Rebased patches for Linux-4.12-rc1
- Removed unwanted /memreserve/ from bcm958742-base.dtsi
- Use ranges DT property to clear view of memory-layout
- Make bcm-sr.h part of clock DT bindings patch
Anup Patel (3):
dt-bindings: bcm: Add Broadcom Stingray bindings document
arm64: dts: Initial DTS files for Broadcom Stingray SOC
arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray
Oza Pawandeep (1):
arm64: dts: Add I2C DT nodes for Stingray SoC
Pramod Kumar (3):
arm64: dts: Add NAND DT nodes for Stingray SOC
arm64: dts: Add pinctrl DT nodes for Stingray SOC
arm64: dts: Add GPIO DT nodes for Stingray SOC
Sandeep Tripathy (3):
dt-bindings: clk: Extend binding doc for Stingray SOC
clk: bcm: Add clocks for Stingray SOC
arm64: dts: Add clock DT nodes for Stingray SOC
Srinath Mannam (1):
arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC
.../devicetree/bindings/arm/bcm/brcm,stingray.txt | 12 +
.../bindings/clock/brcm,iproc-clocks.txt | 76 ++++
arch/arm64/boot/dts/broadcom/Makefile | 1 +
arch/arm64/boot/dts/broadcom/stingray/Makefile | 6 +
.../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 131 ++++++
.../boot/dts/broadcom/stingray/bcm958742k.dts | 78 ++++
.../boot/dts/broadcom/stingray/bcm958742t.dts | 40 ++
.../boot/dts/broadcom/stingray/stingray-clock.dtsi | 170 ++++++++
.../dts/broadcom/stingray/stingray-pinctrl.dtsi | 345 ++++++++++++++++
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 460 +++++++++++++++++++++
drivers/clk/bcm/Kconfig | 8 +
drivers/clk/bcm/Makefile | 1 +
drivers/clk/bcm/clk-sr.c | 320 ++++++++++++++
include/dt-bindings/clock/bcm-sr.h | 101 +++++
.../dt-bindings/pinctrl/brcm,pinctrl-stingray.h | 68 +++
15 files changed, 1817 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,stingray.txt
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/Makefile
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
create mode 100644 drivers/clk/bcm/clk-sr.c
create mode 100644 include/dt-bindings/clock/bcm-sr.h
create mode 100644 include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h
--
2.7.4
next reply other threads:[~2017-05-26 9:24 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-26 9:24 Anup Patel [this message]
2017-05-26 9:24 ` [PATCH v5 01/11] dt-bindings: bcm: Add Broadcom Stingray bindings document Anup Patel
2017-05-26 9:24 ` [PATCH v5 02/11] dt-bindings: clk: Extend binding doc for Stingray SOC Anup Patel
2017-05-26 9:24 ` [PATCH v5 03/11] clk: bcm: Add clocks " Anup Patel
2017-05-26 9:24 ` [PATCH v5 04/11] arm64: dts: Initial DTS files for Broadcom " Anup Patel
2017-06-02 5:37 ` Florian Fainelli
[not found] ` <abeca9ac-487c-b6dc-1397-4134b0442909-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-06-02 6:32 ` Anup Patel
2017-05-26 9:24 ` [PATCH v5 05/11] arm64: dts: Add clock DT nodes for " Anup Patel
2017-05-26 9:24 ` [PATCH v5 06/11] arm64: dts: Add NAND " Anup Patel
2017-05-26 9:25 ` [PATCH v5 07/11] arm64: dts: Add pinctrl " Anup Patel
[not found] ` <1495790704-2438-1-git-send-email-anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2017-05-26 9:25 ` [PATCH v5 08/11] arm64: dts: Add GPIO " Anup Patel
2017-05-26 9:25 ` [PATCH v5 09/11] arm64: dts: Add I2C DT nodes for Stingray SoC Anup Patel
2017-05-26 9:25 ` [PATCH v5 10/11] arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray Anup Patel
2017-05-26 9:25 ` [PATCH v5 11/11] arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC Anup Patel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1495790704-2438-1-git-send-email-anup.patel@broadcom.com \
--to=anup.patel@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=jonmason@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=oza.oza@broadcom.com \
--cc=pramod.kumar@broadcom.com \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sandeep.tripathy@broadcom.com \
--cc=sboyd@codeaurora.org \
--cc=sbranden@broadcom.com \
--cc=srinath.mannam@broadcom.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).