devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Anup Patel <anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
To: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Michael Turquette
	<mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
	Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>,
	Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
	Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
	Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
	Jon Mason <jonmason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
	Florian Fainelli
	<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Oza Pawandeep <oza.oza-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
	Srinath Mannam
	<srinath.mannam-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
	Pramod Kumar
	<pramod.kumar-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
	Sandeep Tripathy
	<sandeep.tripathy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org
Subject: [PATCH v5 09/11] arm64: dts: Add I2C DT nodes for Stingray SoC
Date: Fri, 26 May 2017 14:55:02 +0530	[thread overview]
Message-ID: <1495790704-2438-10-git-send-email-anup.patel@broadcom.com> (raw)
In-Reply-To: <1495790704-2438-1-git-send-email-anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>

From: Oza Pawandeep <oza.oza-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>

This patch adds I2C DT nodes on Stingray SoC.

Signed-off-by: Oza Pawandeep <oza.oza-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Reviewed-by: Vikram Prakash <vikram.prakash-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Reviewed-by: Ray Jui <ray.jui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Reviewed-by: Scott Branden <scott.branden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
---
 .../boot/dts/broadcom/stingray/bcm958742-base.dtsi | 22 ++++++++++++++++++++++
 .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 20 ++++++++++++++++++++
 2 files changed, 42 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index aad45a2..ff59a26 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -54,6 +54,28 @@
 	status = "okay";
 };
 
+&i2c0 {
+	status = "okay";
+
+	pca9505: pca9505@20 {
+		compatible = "nxp,pca9505";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	pcf8574: pcf8574@20 {
+		compatible = "nxp,pcf8574a";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x27>;
+	};
+};
+
 &nand {
 	status = "ok";
 	nandcs@0 {
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 059086f..8a077ff 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -269,6 +269,16 @@
 
 		#include "stingray-pinctrl.dtsi"
 
+		i2c0: i2c@689b0000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x000b0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 177 IRQ_TYPE_NONE>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
 		gpio_hsls: gpio@689d0000 {
 			compatible = "brcm,iproc-gpio";
 			reg = <0x000d0000 0x864>;
@@ -295,6 +305,16 @@
 					<&pinmux 151 91 4>;
 		};
 
+		i2c1: i2c@689e0000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x000e0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 178 IRQ_TYPE_NONE>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
 		uart0: uart@68a00000 {
 			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2017-05-26  9:25 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-26  9:24 [PATCH v5 00/11] Broadcom Stingray SOC Initial Support Anup Patel
2017-05-26  9:24 ` [PATCH v5 01/11] dt-bindings: bcm: Add Broadcom Stingray bindings document Anup Patel
2017-05-26  9:24 ` [PATCH v5 02/11] dt-bindings: clk: Extend binding doc for Stingray SOC Anup Patel
2017-05-26  9:24 ` [PATCH v5 03/11] clk: bcm: Add clocks " Anup Patel
2017-05-26  9:24 ` [PATCH v5 04/11] arm64: dts: Initial DTS files for Broadcom " Anup Patel
2017-06-02  5:37   ` Florian Fainelli
     [not found]     ` <abeca9ac-487c-b6dc-1397-4134b0442909-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-06-02  6:32       ` Anup Patel
2017-05-26  9:24 ` [PATCH v5 05/11] arm64: dts: Add clock DT nodes for " Anup Patel
2017-05-26  9:24 ` [PATCH v5 06/11] arm64: dts: Add NAND " Anup Patel
2017-05-26  9:25 ` [PATCH v5 07/11] arm64: dts: Add pinctrl " Anup Patel
     [not found] ` <1495790704-2438-1-git-send-email-anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2017-05-26  9:25   ` [PATCH v5 08/11] arm64: dts: Add GPIO " Anup Patel
2017-05-26  9:25   ` Anup Patel [this message]
2017-05-26  9:25 ` [PATCH v5 10/11] arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray Anup Patel
2017-05-26  9:25 ` [PATCH v5 11/11] arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC Anup Patel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1495790704-2438-10-git-send-email-anup.patel@broadcom.com \
    --to=anup.patel-dy08kvg/lbpwk0htik3j/w@public.gmane.org \
    --cc=bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
    --cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=jonmason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
    --cc=oza.oza-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
    --cc=pramod.kumar-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
    --cc=rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=sandeep.tripathy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
    --cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
    --cc=srinath.mannam-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
    --cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).