devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] mfd: Add driver for RAVE Supervisory Processor
@ 2017-06-06 18:06 Andrey Smirnov
       [not found] ` <20170606180643.14258-1-andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
                   ` (3 more replies)
  0 siblings, 4 replies; 7+ messages in thread
From: Andrey Smirnov @ 2017-06-06 18:06 UTC (permalink / raw)
  To: Lee Jones
  Cc: Andrey Smirnov, cphealy-Re5JQEeQqe8AvxtiuMwx3w, Lucas Stach,
	Nikita Yushchenko, Rob Herring, Mark Rutland,
	devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA

Add a driver for RAVE Supervisory Processor, an MCU implementing
varoius bits of housekeeping functionality (watchdoging, backlight
control, LED control, etc) on RAVE family of products by Zodiac
Inflight Innovations.

This driver implementes core MFD/serdev device as well as
communication subroutines necessary for commanding the device.

Cc: cphealy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: Lucas Stach <l.stach-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: Nikita Yushchenko <nikita.yoush-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Andrey Smirnov <andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---

Note that the driver for "zii,rave-sp-watchdog" exists, but I haven't
submitted it yet, becuase I wanted to make sure that API exposed by
this MFD is acceptable and doesn't need drastic changes

 .../devicetree/bindings/mfd/zii,rave-sp.txt        |   33 +
 drivers/mfd/Kconfig                                |    9 +
 drivers/mfd/Makefile                               |    1 +
 drivers/mfd/rave-sp.c                              | 1009 ++++++++++++++++++++
 include/linux/rave-sp.h                            |   54 ++
 5 files changed, 1106 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
 create mode 100644 drivers/mfd/rave-sp.c
 create mode 100644 include/linux/rave-sp.h

diff --git a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
new file mode 100644
index 0000000..46a904c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
@@ -0,0 +1,33 @@
+Zodiac Inflight Innovations RAVE Supervisory Processor
+
+Required parent device properties:
+
+ - compatible: Should be one of:
+	- "zii,rave-sp-niu"
+	- "zii,rave-sp-mezz"
+	- "zii,rave-sp-esb"
+	- "zii,rave-sp-rdu1"
+	- "zii,rave-sp-rdu2"
+
+ - current-speed: Should be set to baud rate SP device is using
+
+RAVE SP consists of the following sub-devices:
+
+Device				 Description
+------				 -----------
+rave-sp-wdt			: Watchdog
+
+
+Example of usage:
+
+	rdu {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+		status = "okay";
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+			status = "okay";
+		};
+	};
+
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3eb5c93..6cab311 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -867,6 +867,15 @@ config MFD_SPMI_PMIC
 	  Say M here if you want to include support for the SPMI PMIC
 	  series as a module.  The module will be called "qcom-spmi-pmic".
 
+config MFD_RAVE_SP
+	tristate "RAVE SP MCU core driver"
+	select MFD_CORE
+	select SERIAL_DEV_BUS
+	select CRC_CCITT
+	help
+	  Select this to get support for the RAVE Supervisory
+	  Processor driver
+
 config MFD_RDC321X
 	tristate "RDC R-321x southbridge"
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c16bf1e..bc3df0a 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -221,3 +221,4 @@ obj-$(CONFIG_MFD_SUN4I_GPADC)	+= sun4i-gpadc.o
 
 obj-$(CONFIG_MFD_STM32_TIMERS) 	+= stm32-timers.o
 obj-$(CONFIG_MFD_MXS_LRADC)     += mxs-lradc.o
+obj-$(CONFIG_MFD_RAVE_SP)	+= rave-sp.o
diff --git a/drivers/mfd/rave-sp.c b/drivers/mfd/rave-sp.c
new file mode 100644
index 0000000..1260f94
--- /dev/null
+++ b/drivers/mfd/rave-sp.c
@@ -0,0 +1,1009 @@
+/*
+ * rave-sp.c - Multifunction core driver for Zodiac Inflight Innovations
+ * SP MCU that is connected via dedicated UART port
+ *
+ * Copyright (C) 2017 Zodiac Inflight Innovations
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * UART protocol using following entities:
+ *  - message to MCU => ACK response
+ *  - event from MCU => event ACK
+ *
+ * Frame structure:
+ * <STX> <DATA> <CHECKSUM> <ETX>
+ * Where:
+ * - STX - is start of transmission character
+ * - ETX - end of transmission
+ * - DATA - payload
+ * - CHECKSUM - checksum calculated on <DATA>
+ *
+ * If <DATA> or <CHECKSUM> contain one of control characters, then it is
+ * escaped using <DLE> control code. Added <DLE> does not participate in
+ * checksum calculation.
+ */
+
+/* #define DEBUG */
+
+#include <linux/atomic.h>
+#include <linux/crc-ccitt.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/sched.h>
+#include <linux/serdev.h>
+#include <linux/rave-sp.h>
+
+enum {
+	STX = 0x02,
+	ETX = 0x03,
+	DLE = 0x10,
+};
+
+enum {
+	RAVE_SP_BOOT_SOURCE_GET = 0,
+	RAVE_SP_BOOT_SOURCE_SET = 1,
+
+	RAVE_SP_MAX_DATA_SIZE   = 64,
+	RAVE_SP_CHECKSUM_SIZE   = 2, /* Worst case scenariou on RDU2 */
+	/*
+	 * We don't store STX, ETX and unescaped bytes, so Rx is only
+	 * DATA + CSUM
+	 */
+	RAVE_SP_RX_BUFFER_SIZE  = RAVE_SP_MAX_DATA_SIZE +
+				  RAVE_SP_CHECKSUM_SIZE,
+	RAVE_SP_STX_ETX_SIZE    = 2,
+	/*
+	 * For Tx we have to have space for everything, STX, EXT and
+	 * potentially stuffed DATA + CSUM data + csum
+	 */
+	RAVE_SP_TX_BUFFER_SIZE  = RAVE_SP_STX_ETX_SIZE +
+				  2 * RAVE_SP_RX_BUFFER_SIZE,
+};
+
+enum rave_sp_deframer_state {
+	RAVE_SP_EXPECT_SOF,
+	RAVE_SP_EXPECT_DATA,
+	RAVE_SP_EXPECT_ESCAPED_DATA,
+};
+
+struct rave_sp_deframer {
+	enum rave_sp_deframer_state state;
+	unsigned char data[RAVE_SP_RX_BUFFER_SIZE];
+	size_t length;
+};
+
+struct rave_sp_reply {
+	size_t length;
+	void  *data;
+	u8     code;
+	u8     ackid;
+	struct completion received;
+};
+
+struct rave_sp_checksum {
+	size_t length;
+	void (*subroutine)(const u8 *, size_t, u8 *);
+};
+
+enum rave_sp_boot_source {
+	RAVE_SP_BOOT_SOURCE_SD		= 0,
+	RAVE_SP_BOOT_SOURCE_EMMC	= 1,
+	RAVE_SP_BOOT_SOURCE_NOR		= 2,
+};
+
+struct rave_sp_variant {
+	const struct rave_sp_checksum *checksum;
+
+	struct {
+		int (*translate)(enum rave_sp_command);
+		int (*get_boot_source)(struct rave_sp *);
+		int (*set_boot_source)(struct rave_sp *,
+				       enum rave_sp_boot_source);
+	} cmd;
+
+	void (*init)(struct rave_sp *);
+
+	struct attribute_group group;
+};
+
+struct rave_sp {
+	struct serdev_device *serdev;
+
+	struct rave_sp_deframer deframer;
+	atomic_t ackid;
+
+	struct mutex bus_lock;
+	struct mutex reply_lock;
+	struct rave_sp_reply *reply;
+
+	const char *part_number_firmware;
+	const char *part_number_bootloader;
+
+	const char *reset_reason;
+	const char *copper_rev_rmb;
+	const char *copper_rev_deb;
+	const char *silicon_devid;
+	const char *silicon_devrev;
+
+	const char *copper_mod_rmb;
+	const char *copper_mod_deb;
+
+	const struct rave_sp_variant *variant;
+
+	struct blocking_notifier_head event_notifier_list;
+
+	struct attribute_group *group;
+};
+
+struct rave_sp_rsp_status {
+	u8 bl_bytes[6];
+	u8 fw_bytes[6];
+	u8 gs_format;
+} __packed;
+
+static bool rave_sp_id_is_event(u8 code)
+{
+	return (code & 0xF0) == RAVE_SP_EVNT_BASE;
+}
+
+static void
+devm_rave_sp_unregister_event_notifier(struct device *dev, void *res)
+{
+	struct rave_sp *sp = dev_get_drvdata(dev->parent);
+	struct notifier_block *nb = *(struct notifier_block **)res;
+	struct blocking_notifier_head *bnh = &sp->event_notifier_list;
+
+	WARN_ON(blocking_notifier_chain_unregister(bnh, nb));
+}
+
+int devm_rave_sp_register_event_notifier(struct device *dev,
+					 struct notifier_block *nb)
+{
+	struct rave_sp *sp = dev_get_drvdata(dev->parent);
+	struct notifier_block **rcnb;
+	int ret;
+
+	rcnb = devres_alloc(devm_rave_sp_unregister_event_notifier,
+			    sizeof(*rcnb), GFP_KERNEL);
+	if (!rcnb)
+		return -ENOMEM;
+
+	ret = blocking_notifier_chain_register(&sp->event_notifier_list, nb);
+	if (!ret) {
+		*rcnb = nb;
+		devres_add(dev, rcnb);
+	} else {
+		devres_free(rcnb);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(devm_rave_sp_register_event_notifier);
+
+static const char *devm_rave_sp_version(struct device *dev, const char *buf)
+{
+	return devm_kasprintf(dev, GFP_KERNEL, "%02d%02d%02d.%c%c\n",
+			      buf[0], le16_to_cpup((const __le16 *)&buf[1]),
+			      buf[3], buf[4], buf[5]);
+}
+
+static int rave_sp_get_status(struct rave_sp *sp,
+			      struct rave_sp_rsp_status *status)
+{
+	u8 cmd[] = {
+		[0] = RAVE_SP_CMD_STATUS,
+		[1] = 0
+	};
+	return rave_sp_exec(sp, cmd, sizeof(cmd), &status, sizeof(status));
+}
+
+static ssize_t
+rave_sp_show_part_number(char *buf, const char *version, size_t version_length)
+{
+	memcpy(buf, version, version_length + 1);
+	return version_length;
+}
+
+#define RAVE_SP_ATTR_RO_STRING(name)					\
+	static ssize_t							\
+	name##_show(struct device *dev,					\
+		    struct device_attribute *attr,			\
+		    char *buf)						\
+	{								\
+		struct rave_sp *sp = dev_get_drvdata(dev);		\
+		return rave_sp_show_part_number(buf, sp->name,		\
+						strlen(sp->name));	\
+	}								\
+	static DEVICE_ATTR_RO(name)
+
+RAVE_SP_ATTR_RO_STRING(part_number_firmware);
+RAVE_SP_ATTR_RO_STRING(part_number_bootloader);
+RAVE_SP_ATTR_RO_STRING(copper_rev_rmb);
+RAVE_SP_ATTR_RO_STRING(copper_rev_deb);
+RAVE_SP_ATTR_RO_STRING(reset_reason);
+RAVE_SP_ATTR_RO_STRING(silicon_devrev);
+RAVE_SP_ATTR_RO_STRING(silicon_devid);
+
+RAVE_SP_ATTR_RO_STRING(copper_mod_rmb);
+RAVE_SP_ATTR_RO_STRING(copper_mod_deb);
+
+static ssize_t
+i2c_device_status_show(struct device *dev,
+		    struct device_attribute *attr,
+		    char *buf)
+{
+	ssize_t ret;
+	struct rave_sp *sp = dev_get_drvdata(dev);
+	u8 status[2];
+	u8 cmd[] = {
+		[0] = RAVE_SP_CMD_GET_I2C_DEVICE_STATUS,
+		[1] = 0
+	};
+
+	ret = rave_sp_exec(sp, cmd, sizeof(cmd), &status, sizeof(status));
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%04x\n", le16_to_cpup((__le16 *)status));
+}
+static DEVICE_ATTR_RO(i2c_device_status);
+
+static int rave_sp_rdu1_get_boot_source(struct rave_sp *sp)
+{
+	struct rave_sp_rsp_status status;
+	const int ret = rave_sp_get_status(sp, &status);
+
+	return (ret < 0) ? ret : (status.gs_format >> 2) & 0x03;
+}
+
+static int rave_sp_rdu1_set_boot_source(struct rave_sp *sp,
+					enum rave_sp_boot_source boot_source)
+{
+	return -ENOTSUPP;
+}
+
+static int rave_sp_common_set_boot_source(struct rave_sp *sp,
+					  enum rave_sp_boot_source boot_source)
+{
+	u8 cmd[] = {
+		[0] = RAVE_SP_CMD_BOOT_SOURCE,
+		[1] = 0,
+		[2] = RAVE_SP_BOOT_SOURCE_GET,
+		[3] = (u8)boot_source,
+	};
+	return rave_sp_exec(sp, cmd, sizeof(cmd), NULL, 0);
+}
+
+static int rave_sp_common_get_boot_source(struct rave_sp *sp)
+{
+	u8 cmd[] = {
+		[0] = RAVE_SP_CMD_BOOT_SOURCE,
+		[1] = 0,
+		[2] = RAVE_SP_BOOT_SOURCE_SET,
+		[3] = 0,
+	};
+	u8 boot_source;
+	const int ret = rave_sp_exec(sp, cmd, sizeof(cmd),
+				     &boot_source, sizeof(boot_source));
+
+	return (ret < 0) ? ret : boot_source;
+}
+
+static ssize_t rave_sp_show_boot_source(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct rave_sp *sp = dev_get_drvdata(dev);
+	const int ret = sp->variant->cmd.get_boot_source(sp);
+
+	return (ret < 0) ? ret : sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t rave_sp_store_boot_source(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	struct rave_sp *sp = dev_get_drvdata(dev);
+	enum rave_sp_boot_source boot_source;
+	int ret;
+	u8 input;
+
+	ret = kstrtou8(buf, 0, &input);
+	if (ret)
+		return ret;
+
+	boot_source = input;
+
+	if (boot_source != RAVE_SP_BOOT_SOURCE_SD &&
+	    boot_source != RAVE_SP_BOOT_SOURCE_EMMC &&
+	    boot_source != RAVE_SP_BOOT_SOURCE_NOR)
+		return -EINVAL;
+
+	ret = sp->variant->cmd.set_boot_source(sp, boot_source);
+
+	return (ret < 0) ? ret : count;
+}
+
+static DEVICE_ATTR(boot_source, 0640,
+		   rave_sp_show_boot_source, rave_sp_store_boot_source);
+
+static void devm_rave_sp_sysfs_group_release(struct device *dev, void *res)
+{
+	struct rave_sp *sp = *(struct rave_sp **)res;
+	const struct attribute_group *group = &sp->variant->group;
+	struct kobject *root = &sp->serdev->dev.kobj;
+
+	sysfs_remove_group(root, group);
+}
+
+static int devm_zii_sysfs_create_group(struct rave_sp *sp)
+{
+	struct rave_sp **rcsp;
+	struct device *dev = &sp->serdev->dev;
+	const struct attribute_group *group = &sp->variant->group;
+	struct kobject *root = &dev->kobj;
+	int ret;
+
+	rcsp = devres_alloc(devm_rave_sp_sysfs_group_release,
+			     sizeof(*rcsp), GFP_KERNEL);
+	if (!rcsp)
+		return -ENOMEM;
+
+	ret = sysfs_create_group(root, group);
+	if (!ret) {
+		*rcsp = sp;
+		devres_add(dev, rcsp);
+	} else {
+		devres_free(rcsp);
+	}
+
+	return ret;
+}
+
+static void csum_8b2c(const u8 *buf, size_t size, u8 *crc)
+{
+	*crc = *buf++;
+	size--;
+
+	while (size--)
+		*crc += *buf++;
+
+	*crc = 1 + ~(*crc);
+}
+
+static void csum_ccitt(const u8 *buf, size_t size, u8 *crc)
+{
+
+	const u16 calculated = crc_ccitt_false(0xffff, buf, size);
+
+	*(__le16 *)crc = cpu_to_be16(calculated);
+}
+
+static void *stuff(unsigned char *dest, const unsigned char *src, size_t n)
+{
+	size_t i;
+
+	for (i = 0; i < n; i++) {
+		const unsigned char byte = *src++;
+
+		switch (byte) {
+		case STX:
+		case ETX:
+		case DLE:
+			*dest++ = DLE;
+		default:
+			*dest++ = byte;
+		}
+	}
+
+	return dest;
+}
+
+static int rave_sp_write(struct rave_sp *sp, const u8 *data, u8 data_size)
+{
+	size_t length;
+	const size_t checksum_length = sp->variant->checksum->length;
+	unsigned char crc[checksum_length];
+	unsigned char frame[RAVE_SP_TX_BUFFER_SIZE];
+	unsigned char *dest = frame;
+
+	if (WARN_ON(data_size > sizeof(frame)))
+		return -ENOMEM;
+
+	sp->variant->checksum->subroutine(data, data_size, crc);
+
+	*dest++ = STX;
+	dest = stuff(dest, data, data_size);
+	dest = stuff(dest, crc, checksum_length);
+	*dest++ = ETX;
+
+	length = dest - frame;
+
+	print_hex_dump(KERN_DEBUG, "rave-sp tx: ", DUMP_PREFIX_NONE,
+		       16, 1, frame, length, false);
+
+	return serdev_device_write(sp->serdev, frame, length, HZ);
+}
+
+static u8 rave_sp_reply_code(u8 command)
+{
+	switch (command) {
+	case 0xA0 ... 0xBE:
+		return command + 0x20;
+	case 0xE0 ... 0xEF:
+		return command | 0x01;
+	default:
+		return command + 0x40;
+	}
+}
+
+int rave_sp_exec(struct rave_sp *sp,
+		 void *__data,  size_t data_size,
+		 void *reply_data, size_t reply_data_size)
+{
+	int ret = 0;
+	unsigned char *data = __data;
+	const u8 ackid = (u8)atomic_inc_return(&sp->ackid);
+	const int command = sp->variant->cmd.translate(data[0]);
+	struct rave_sp_reply reply = {
+		.code     = rave_sp_reply_code((u8)command),
+		.ackid    = ackid,
+		.data     = reply_data,
+		.length   = reply_data_size,
+		.received = COMPLETION_INITIALIZER_ONSTACK(reply.received),
+	};
+
+	if (command < 0)
+		return command;
+
+	mutex_lock(&sp->bus_lock);
+
+	mutex_lock(&sp->reply_lock);
+	sp->reply = &reply;
+	mutex_unlock(&sp->reply_lock);
+
+	data[0] = (u8)command;
+	data[1] = ackid;
+
+	rave_sp_write(sp, data, data_size);
+
+	if (!wait_for_completion_timeout(&reply.received, HZ)) {
+		dev_err(&sp->serdev->dev, "Command timeout\n");
+		ret = -ETIMEDOUT;
+
+		mutex_lock(&sp->reply_lock);
+		sp->reply = NULL;
+		mutex_unlock(&sp->reply_lock);
+	}
+
+	mutex_unlock(&sp->bus_lock);
+	return ret;
+}
+EXPORT_SYMBOL(rave_sp_exec);
+
+static void rave_sp_receive_event(struct rave_sp *sp,
+				  const unsigned char *data, size_t length)
+{
+	u8 cmd[] = {
+		[0] = rave_sp_reply_code(data[0]),
+		[1] = data[1],
+	};
+
+	rave_sp_write(sp, cmd, sizeof(cmd));
+
+	blocking_notifier_call_chain(&sp->event_notifier_list,
+				     rave_sp_action(data[0], data[2]),
+				     NULL);
+}
+
+static void rave_sp_receive_reply(struct rave_sp *sp,
+				  const unsigned char *data, size_t length)
+{
+	struct device *dev = &sp->serdev->dev;
+	struct rave_sp_reply *reply;
+	const  size_t payload_length = length - 2;
+
+	mutex_lock(&sp->reply_lock);
+	reply = sp->reply;
+
+	if (reply && reply->code == data[0] && reply->ackid == data[1] &&
+	    payload_length >= reply->length) {
+		/*
+		 * We are relying on memcpy(dst, src, 0) to be a no-op
+		 * when handling commands that have a no-payload reply
+		 */
+		memcpy(reply->data, &data[2], reply->length);
+		complete(&reply->received);
+		sp->reply = NULL;
+	} else {
+		dev_err(dev, "Ignoring incorrect reply\n");
+		dev_dbg(dev, "Code:   expected = 0x%08x received = 0x%08x\n",
+			reply->code, data[0]);
+		dev_dbg(dev, "ACK ID: expected = 0x%08x received = 0x%08x\n",
+			reply->ackid, data[1]);
+		dev_dbg(dev, "Length: expected = %u received = %u\n",
+			reply->length, payload_length);
+	}
+
+	mutex_unlock(&sp->reply_lock);
+}
+
+static void rave_sp_receive_frame(struct rave_sp *sp,
+				  const unsigned char *data,
+				  size_t length)
+{
+	const size_t checksum_length = sp->variant->checksum->length;
+	const size_t payload_length  = length - checksum_length;
+	const u8 *crc_reported       = &data[payload_length];
+	struct device *dev           = &sp->serdev->dev;
+	u8 crc_calculated[checksum_length];
+
+	print_hex_dump(KERN_DEBUG, "rave-sp rx: ", DUMP_PREFIX_NONE,
+		       16, 1, data, length, false);
+
+	if (unlikely(length <= checksum_length)) {
+		dev_warn(dev, "Dropping short frame\n");
+		return;
+	}
+
+	sp->variant->checksum->subroutine(data, payload_length, crc_calculated);
+
+	if (memcmp(crc_calculated, crc_reported, checksum_length)) {
+		dev_warn(dev, "Dropping bad frame\n");
+		return;
+	}
+
+	if (rave_sp_id_is_event(data[0]))
+		rave_sp_receive_event(sp, data, length);
+	else
+		rave_sp_receive_reply(sp, data, length);
+}
+
+static int rave_sp_receive_buf(struct serdev_device *serdev,
+			       const unsigned char *buf, size_t size)
+{
+	struct device *dev  = &serdev->dev;
+	struct rave_sp *sp = dev_get_drvdata(dev);
+	struct rave_sp_deframer *deframer = &sp->deframer;
+	const unsigned char *src = buf;
+	const unsigned char *end = buf + size;
+	bool reset_framer = false;
+
+	while (src < end) {
+		const unsigned char byte = *src++;
+
+		switch (deframer->state) {
+
+		case RAVE_SP_EXPECT_SOF:
+			if (byte == STX)
+				deframer->state = RAVE_SP_EXPECT_DATA;
+			continue;
+
+		case RAVE_SP_EXPECT_DATA:
+			switch (byte) {
+			case ETX:
+				rave_sp_receive_frame(sp,
+						      deframer->data,
+						      deframer->length);
+				reset_framer = true;
+				break;
+			case STX:
+				dev_warn(dev, "Bad frame: STX before ETX\n");
+				reset_framer = true;
+				break;
+			case DLE:
+				deframer->state = RAVE_SP_EXPECT_ESCAPED_DATA;
+				continue;
+			}
+
+		case RAVE_SP_EXPECT_ESCAPED_DATA: /* FALLTHROUGH */
+			deframer->data[deframer->length++] = byte;
+
+			if (deframer->length == sizeof(deframer->data)) {
+				dev_warn(dev, "Bad frame: Too long\n");
+				reset_framer = true;
+				break;
+			}
+
+			deframer->state = RAVE_SP_EXPECT_DATA;
+			break;
+		}
+	}
+
+	if (reset_framer) {
+		deframer->state  = RAVE_SP_EXPECT_SOF;
+		deframer->length = 0;
+	}
+
+	return src - buf;
+}
+
+static int rave_sp_rdu1_cmd_translate(enum rave_sp_command command)
+{
+	if (command >= RAVE_SP_CMD_STATUS &&
+	    command <= RAVE_SP_CMD_CONTROL_EVENTS)
+		return command;
+	else
+		return -EINVAL;
+}
+
+static int rave_sp_rdu2_cmd_translate(enum rave_sp_command command)
+{
+	if (command >= RAVE_SP_CMD_GET_FIRMWARE_VERSION &&
+	    command <= RAVE_SP_CMD_GET_GPIO_STATE)
+		return command;
+	else if (command == RAVE_SP_CMD_REQ_COPPER_REV)
+		return 0x28;
+	else
+		return rave_sp_rdu1_cmd_translate(command);
+}
+
+static int rave_sp_default_cmd_translate(enum rave_sp_command command)
+{
+	switch (command) {
+	case RAVE_SP_CMD_GET_FIRMWARE_VERSION:
+		return 0x11;
+	case RAVE_SP_CMD_GET_BOOTLOADER_VERSION:
+		return 0x12;
+	case RAVE_SP_CMD_RESET_REASON:
+		return 0x1F;
+	case RAVE_SP_CMD_BOOT_SOURCE:
+		return 0x14;
+	case RAVE_SP_CMD_RESET:
+		return 0x1E;
+	case RAVE_SP_CMD_SW_WDT:
+		return 0x1C;
+	default:
+		return -EINVAL;
+	}
+}
+
+static void rave_sp_load_reset_reason(struct rave_sp *sp)
+{
+	struct device *dev = &sp->serdev->dev;
+	u8 cmd[] = {
+		[0] = RAVE_SP_CMD_RESET_REASON,
+		[1] = 0,
+	};
+	u8 reason;
+	int ret;
+
+	ret = rave_sp_exec(sp, cmd, sizeof(cmd), &reason, sizeof(reason));
+	if (!ret)
+		sp->reset_reason =
+			devm_kasprintf(dev, GFP_KERNEL, "%02x\n", reason);
+	else
+		dev_err(dev, "CMD_RESET_REASON failed %d\n", ret);
+}
+
+static void rave_sp_load_silicon_rev(struct rave_sp *sp)
+{
+	struct device *dev = &sp->serdev->dev;
+	u8 cmd[] = {
+		[0] = RAVE_SP_CMD_GET_SP_SILICON_REV,
+		[1] = 0
+	};
+	struct {
+		__le32 devid;
+		__le32 devrev;
+	} __packed reply;
+	int ret;
+
+	ret = rave_sp_exec(sp, cmd, sizeof(cmd), &reply, sizeof(reply));
+	if (!ret) {
+		sp->silicon_devid  = devm_kasprintf(dev, GFP_KERNEL, "%08x\n",
+						    le32_to_cpu(reply.devid));
+		sp->silicon_devrev = devm_kasprintf(dev, GFP_KERNEL, "%08x\n",
+						    le32_to_cpu(reply.devrev));
+	} else {
+		dev_err(dev, "CMD_GET_SP_SILICON_REV failed %d\n", ret);
+	}
+}
+
+static void rave_sp_rdu1_init(struct rave_sp *sp)
+{
+	struct device *dev = &sp->serdev->dev;
+	u8 cmd[] = {
+		[0] = RAVE_SP_CMD_REQ_COPPER_REV,
+		[1] = 0
+	};
+	struct rave_sp_rsp_status status;
+	u8 revision[2];
+	int ret;
+
+	ret = rave_sp_get_status(sp, &status);
+	if (!ret) {
+		sp->part_number_firmware =
+			devm_rave_sp_version(dev, status.fw_bytes);
+		sp->part_number_bootloader =
+			devm_rave_sp_version(dev, status.bl_bytes);
+	} else {
+		dev_err(dev, "CMD_STATUS failed %d\n", ret);
+	}
+
+
+	ret = rave_sp_exec(sp, cmd, sizeof(cmd), &revision, sizeof(revision));
+	if (!ret) {
+		sp->copper_rev_rmb = devm_kasprintf(dev, GFP_KERNEL, "%02x\n",
+						    revision[0]);
+		sp->copper_rev_deb = devm_kasprintf(dev, GFP_KERNEL, "%02x\n",
+						    revision[1]);
+	} else {
+		dev_err(dev, "CMD_REQ_COPPER_REV failed %d\n", ret);
+	}
+}
+
+static void rave_sp_common_init(struct rave_sp *sp)
+{
+	struct device *dev = &sp->serdev->dev;
+	u8 version[6];
+	u8 cmd[2];
+	int ret;
+
+	cmd[0] = RAVE_SP_CMD_GET_FIRMWARE_VERSION;
+	ret = rave_sp_exec(sp, cmd, sizeof(cmd), version, sizeof(version));
+	if (!ret)
+		sp->part_number_firmware =
+			devm_rave_sp_version(dev, version);
+	else
+		dev_warn(dev, "CMD_GET_FIRMWARE_VERSION failed %d\n", ret);
+
+	cmd[0] = RAVE_SP_CMD_GET_BOOTLOADER_VERSION;
+	ret = rave_sp_exec(sp, cmd, sizeof(cmd), version, sizeof(version));
+	if (!ret)
+		sp->part_number_bootloader =
+			devm_rave_sp_version(dev, version);
+	else
+		dev_warn(dev, "CMD_GET_BOOTLOADER_VERSION failed %d\n", ret);
+}
+
+#define RAVE_SP_RDU2_BOARD_TYPE_RMB	0
+#define RAVE_SP_RDU2_BOARD_TYPE_DEB	1
+
+static void rave_sp_rdu2_init(struct rave_sp *sp)
+{
+	struct device *dev = &sp->serdev->dev;
+	u8 cmd[] = {
+		[0] = RAVE_SP_CMD_REQ_COPPER_REV,
+		[1] = 0,
+		[2] = RAVE_SP_RDU2_BOARD_TYPE_RMB,
+	};
+	u8 copper_rev;
+	int ret;
+
+	rave_sp_common_init(sp);
+
+	ret = rave_sp_exec(sp, cmd, sizeof(cmd),
+			   &copper_rev, sizeof(copper_rev));
+	if (!ret) {
+		sp->copper_rev_rmb = devm_kasprintf(dev, GFP_KERNEL, "%01x\n",
+						    copper_rev & 0x1F);
+		sp->copper_mod_rmb = devm_kasprintf(dev, GFP_KERNEL, "%01x\n",
+						    copper_rev >> 5);
+	} else {
+		dev_warn(dev,
+			 "RAVE_SP_CMD_REQ_COPPER_REV(RMB) failed %d\n", ret);
+	}
+
+	cmd[2] = RAVE_SP_RDU2_BOARD_TYPE_DEB;
+
+	ret = rave_sp_exec(sp, cmd, sizeof(cmd),
+			   &copper_rev, sizeof(copper_rev));
+	if (!ret) {
+		sp->copper_rev_deb = devm_kasprintf(dev, GFP_KERNEL, "%01x\n",
+						    copper_rev & 0x1F);
+		sp->copper_mod_deb = devm_kasprintf(dev, GFP_KERNEL, "%01x\n",
+						    copper_rev >> 5);
+	} else {
+		dev_warn(dev,
+			 "RAVE_SP_CMD_REQ_COPPER_REV(DEB) failed %d\n", ret);
+	}
+}
+
+static const struct rave_sp_checksum rave_sp_checksum_8b2c = {
+	.length     = 1,
+	.subroutine = csum_8b2c,
+};
+
+static const struct rave_sp_checksum rave_sp_checksum_ccitt = {
+	.length     = 2,
+	.subroutine = csum_ccitt,
+};
+
+static struct attribute *rave_sp_common_attrs[] = {
+	&dev_attr_part_number_firmware.attr,
+	&dev_attr_part_number_bootloader.attr,
+	&dev_attr_boot_source.attr,
+	&dev_attr_reset_reason.attr,
+	NULL
+};
+
+static struct attribute *rave_sp_rdu1_attrs[] = {
+	&dev_attr_part_number_firmware.attr,
+	&dev_attr_part_number_bootloader.attr,
+	&dev_attr_boot_source.attr,
+	&dev_attr_reset_reason.attr,
+	&dev_attr_copper_rev_deb.attr,
+	&dev_attr_copper_rev_rmb.attr,
+	&dev_attr_i2c_device_status.attr,
+	&dev_attr_silicon_devid.attr,
+	&dev_attr_silicon_devrev.attr,
+
+	NULL
+};
+
+static struct attribute *rave_sp_rdu2_attrs[] = {
+	&dev_attr_part_number_firmware.attr,
+	&dev_attr_part_number_bootloader.attr,
+	&dev_attr_boot_source.attr,
+	&dev_attr_reset_reason.attr,
+	&dev_attr_copper_rev_deb.attr,
+	&dev_attr_copper_rev_rmb.attr,
+	&dev_attr_i2c_device_status.attr,
+	&dev_attr_silicon_devid.attr,
+	&dev_attr_silicon_devrev.attr,
+
+	&dev_attr_copper_mod_rmb.attr,
+	&dev_attr_copper_mod_deb.attr,
+
+	NULL
+};
+
+static const struct rave_sp_variant rave_sp_legacy = {
+	.checksum = &rave_sp_checksum_8b2c,
+	.cmd = {
+		.translate = rave_sp_default_cmd_translate,
+		.get_boot_source = rave_sp_common_get_boot_source,
+		.set_boot_source = rave_sp_common_set_boot_source,
+	},
+	.group = {
+		.attrs = rave_sp_common_attrs,
+	},
+	.init = rave_sp_common_init,
+};
+
+static const struct rave_sp_variant rave_sp_rdu1 = {
+	.checksum = &rave_sp_checksum_8b2c,
+	.cmd = {
+		.translate = rave_sp_rdu1_cmd_translate,
+		.get_boot_source = rave_sp_rdu1_get_boot_source,
+		.set_boot_source = rave_sp_rdu1_set_boot_source,
+	},
+	.group = {
+		.attrs = rave_sp_rdu1_attrs,
+	},
+	.init = rave_sp_rdu1_init,
+};
+
+static const struct rave_sp_variant rave_sp_rdu2 = {
+	.checksum = &rave_sp_checksum_ccitt,
+	.cmd = {
+		.translate = rave_sp_rdu2_cmd_translate,
+		.get_boot_source = rave_sp_common_get_boot_source,
+		.set_boot_source = rave_sp_common_set_boot_source,
+	},
+	.group = {
+		.attrs = rave_sp_rdu2_attrs,
+	},
+	.init = rave_sp_rdu2_init,
+};
+
+static const struct of_device_id rave_sp_dt_ids[] = {
+	{ .compatible = COMPATIBLE_RAVE_SP_NIU,  .data = &rave_sp_legacy },
+	{ .compatible = COMPATIBLE_RAVE_SP_MEZZ, .data = &rave_sp_legacy },
+	{ .compatible = COMPATIBLE_RAVE_SP_ESB,	 .data = &rave_sp_legacy },
+	{ .compatible = COMPATIBLE_RAVE_SP_RDU1, .data = &rave_sp_rdu1   },
+	{ .compatible = COMPATIBLE_RAVE_SP_RDU2, .data = &rave_sp_rdu2   },
+	{ /* sentinel */ }
+};
+
+static int rave_sp_probe(struct serdev_device *serdev)
+{
+	static const struct serdev_device_ops serdev_device_ops = {
+		.receive_buf  = rave_sp_receive_buf,
+		.write_wakeup = serdev_device_write_wakeup,
+	};
+	struct rave_sp *sp;
+	struct device *dev = &serdev->dev;
+	const char *unknown = "unknown";
+	u32 baud;
+	int ret;
+
+	if (of_property_read_u32(dev->of_node, "current-speed", &baud)) {
+		dev_err(dev,
+			"'current-speed' is not specified in device node\n");
+		return -EINVAL;
+	}
+
+	sp = devm_kzalloc(dev, sizeof(*sp), GFP_KERNEL);
+	if (!sp)
+		return -ENOMEM;
+
+	sp->serdev = serdev;
+	dev_set_drvdata(dev, sp);
+
+	sp->variant = of_device_get_match_data(dev);
+	if (!sp->variant)
+		return -ENODEV;
+
+	mutex_init(&sp->bus_lock);
+	mutex_init(&sp->reply_lock);
+	BLOCKING_INIT_NOTIFIER_HEAD(&sp->event_notifier_list);
+
+	serdev_device_set_client_ops(serdev, &serdev_device_ops);
+	ret = serdev_device_open(serdev);
+	if (ret)
+		return ret;
+
+	serdev_device_set_baudrate(serdev, baud);
+
+
+	sp->silicon_devid		= unknown;
+	sp->silicon_devrev		= unknown;
+	sp->copper_rev_deb		= unknown;
+	sp->copper_rev_rmb		= unknown;
+	sp->copper_mod_deb		= unknown;
+	sp->copper_mod_rmb		= unknown;
+	sp->reset_reason		= unknown;
+	sp->part_number_firmware	= unknown;
+	sp->part_number_bootloader	= unknown;
+
+	sp->variant->init(sp);
+
+	dev_info(dev, "Firmware version: %s\n", sp->part_number_firmware);
+	dev_info(dev, "Bootloader version: %s\n", sp->part_number_bootloader);
+
+	rave_sp_load_reset_reason(sp);
+	rave_sp_load_silicon_rev(sp);
+
+	ret = devm_zii_sysfs_create_group(sp);
+	if (ret) {
+		serdev_device_close(serdev);
+		return ret;
+	}
+
+	return of_platform_default_populate(dev->of_node, NULL, dev);
+}
+
+static void rave_sp_remove(struct serdev_device *serdev)
+{
+	of_platform_depopulate(&serdev->dev);
+	serdev_device_close(serdev);
+}
+
+static struct serdev_device_driver rave_sp_drv = {
+	.probe			= rave_sp_probe,
+	.remove			= rave_sp_remove,
+	.driver = {
+		.name		= KBUILD_MODNAME,
+		.owner		= THIS_MODULE,
+		.of_match_table	= rave_sp_dt_ids,
+	},
+};
+
+module_serdev_device_driver(rave_sp_drv);
+
+MODULE_DEVICE_TABLE(of, rave_sp_dt_ids);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrey Vostrikov <andrey.vostrikov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>");
+MODULE_AUTHOR("Nikita Yushchenko <nikita.yoush-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>");
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>");
+MODULE_DESCRIPTION("RAVE SP core driver");
diff --git a/include/linux/rave-sp.h b/include/linux/rave-sp.h
new file mode 100644
index 0000000..62baf89
--- /dev/null
+++ b/include/linux/rave-sp.h
@@ -0,0 +1,54 @@
+#ifndef _LINUX_RAVE_SP_H_
+#define _LINUX_RAVE_SP_H_
+
+enum rave_sp_command {
+	RAVE_SP_CMD_GET_FIRMWARE_VERSION	= 0x20,
+	RAVE_SP_CMD_GET_BOOTLOADER_VERSION	= 0x21,
+	RAVE_SP_CMD_BOOT_SOURCE			= 0x26,
+	RAVE_SP_CMD_GET_BOARD_COPPER_REV	= 0x2B,
+	RAVE_SP_CMD_GET_GPIO_STATE		= 0x2F,
+
+	RAVE_SP_CMD_STATUS			= 0xA0,
+	RAVE_SP_CMD_SW_WDT			= 0xA1,
+	RAVE_SP_CMD_PET_WDT			= 0xA2,
+	RAVE_SP_CMD_RESET			= 0xA7,
+	RAVE_SP_CMD_RESET_REASON		= 0xA8,
+
+	RAVE_SP_CMD_REQ_COPPER_REV		= 0xB6,
+	RAVE_SP_CMD_GET_I2C_DEVICE_STATUS	= 0xBA,
+	RAVE_SP_CMD_GET_SP_SILICON_REV		= 0xB9,
+	RAVE_SP_CMD_CONTROL_EVENTS		= 0xBB,
+
+	RAVE_SP_EVNT_BASE			= 0xE0,
+};
+
+struct rave_sp;
+
+static inline unsigned long rave_sp_action(u8 event, u8 value)
+{
+	return ((unsigned long)value << 8) | event;
+}
+
+static inline u8 rave_sp_action_get_event(unsigned long action)
+{
+	return action & 0xff;
+}
+
+static inline u8 rave_sp_action_get_value(unsigned long action)
+{
+	return (action >> 8) & 0xff;
+}
+
+int rave_sp_exec(struct rave_sp *sp,
+		 void *__data,  size_t data_size,
+		 void *reply_data, size_t reply_data_size);
+int devm_rave_sp_register_event_notifier(struct device *dev,
+				     struct notifier_block *nb);
+
+#define COMPATIBLE_RAVE_SP_NIU		"zii,rave-sp-niu"
+#define COMPATIBLE_RAVE_SP_MEZZ		"zii,rave-sp-mezz"
+#define COMPATIBLE_RAVE_SP_ESB		"zii,rave-sp-esb"
+#define COMPATIBLE_RAVE_SP_RDU1		"zii,rave-sp-rdu1"
+#define COMPATIBLE_RAVE_SP_RDU2		"zii,rave-sp-rdu2"
+
+#endif /* _LINUX_RAVE_SP_H_ */
-- 
2.9.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [PATCH] mfd: Add driver for RAVE Supervisory Processor
       [not found] ` <20170606180643.14258-1-andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
@ 2017-06-07  1:26   ` Andrey Smirnov
  0 siblings, 0 replies; 7+ messages in thread
From: Andrey Smirnov @ 2017-06-07  1:26 UTC (permalink / raw)
  To: Lee Jones
  Cc: Andrey Smirnov, Chris Healy, Lucas Stach, Nikita Yushchenko,
	Rob Herring, Mark Rutland, devicetree-u79uwXL29TY76Z2rM5mHXA,
	linux-kernel

On Tue, Jun 6, 2017 at 11:06 AM, Andrey Smirnov
<andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> Add a driver for RAVE Supervisory Processor, an MCU implementing
> varoius bits of housekeeping functionality (watchdoging, backlight
> control, LED control, etc) on RAVE family of products by Zodiac
> Inflight Innovations.
>
> This driver implementes core MFD/serdev device as well as
> communication subroutines necessary for commanding the device.
>
> Cc: cphealy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
> Cc: Lucas Stach <l.stach-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> Cc: Nikita Yushchenko <nikita.yoush-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Signed-off-by: Andrey Smirnov <andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>
> Note that the driver for "zii,rave-sp-watchdog" exists, but I haven't
> submitted it yet, becuase I wanted to make sure that API exposed by
> this MFD is acceptable and doesn't need drastic changes
>
>  .../devicetree/bindings/mfd/zii,rave-sp.txt        |   33 +
>  drivers/mfd/Kconfig                                |    9 +
>  drivers/mfd/Makefile                               |    1 +
>  drivers/mfd/rave-sp.c                              | 1009 ++++++++++++++++++++
>  include/linux/rave-sp.h                            |   54 ++
>  5 files changed, 1106 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
>  create mode 100644 drivers/mfd/rave-sp.c
>  create mode 100644 include/linux/rave-sp.h
>
> diff --git a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
> new file mode 100644
> index 0000000..46a904c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
> @@ -0,0 +1,33 @@
> +Zodiac Inflight Innovations RAVE Supervisory Processor
> +
> +Required parent device properties:
> +
> + - compatible: Should be one of:
> +       - "zii,rave-sp-niu"
> +       - "zii,rave-sp-mezz"
> +       - "zii,rave-sp-esb"
> +       - "zii,rave-sp-rdu1"
> +       - "zii,rave-sp-rdu2"
> +
> + - current-speed: Should be set to baud rate SP device is using
> +
> +RAVE SP consists of the following sub-devices:
> +
> +Device                          Description
> +------                          -----------
> +rave-sp-wdt                    : Watchdog
> +
> +
> +Example of usage:
> +
> +       rdu {
> +               compatible = "zii,rave-sp-rdu2";
> +               current-speed = <1000000>;
> +               status = "okay";
> +
> +               watchdog {
> +                       compatible = "zii,rave-sp-watchdog";
> +                       status = "okay";
> +               };
> +       };
> +
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 3eb5c93..6cab311 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -867,6 +867,15 @@ config MFD_SPMI_PMIC
>           Say M here if you want to include support for the SPMI PMIC
>           series as a module.  The module will be called "qcom-spmi-pmic".
>
> +config MFD_RAVE_SP
> +       tristate "RAVE SP MCU core driver"
> +       select MFD_CORE
> +       select SERIAL_DEV_BUS
> +       select CRC_CCITT
> +       help
> +         Select this to get support for the RAVE Supervisory
> +         Processor driver
> +
>  config MFD_RDC321X
>         tristate "RDC R-321x southbridge"
>         select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index c16bf1e..bc3df0a 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -221,3 +221,4 @@ obj-$(CONFIG_MFD_SUN4I_GPADC)       += sun4i-gpadc.o
>
>  obj-$(CONFIG_MFD_STM32_TIMERS)         += stm32-timers.o
>  obj-$(CONFIG_MFD_MXS_LRADC)     += mxs-lradc.o
> +obj-$(CONFIG_MFD_RAVE_SP)      += rave-sp.o
> diff --git a/drivers/mfd/rave-sp.c b/drivers/mfd/rave-sp.c
> new file mode 100644
> index 0000000..1260f94
> --- /dev/null
> +++ b/drivers/mfd/rave-sp.c
> @@ -0,0 +1,1009 @@
> +/*
> + * rave-sp.c - Multifunction core driver for Zodiac Inflight Innovations
> + * SP MCU that is connected via dedicated UART port
> + *
> + * Copyright (C) 2017 Zodiac Inflight Innovations
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +/*
> + * UART protocol using following entities:
> + *  - message to MCU => ACK response
> + *  - event from MCU => event ACK
> + *
> + * Frame structure:
> + * <STX> <DATA> <CHECKSUM> <ETX>
> + * Where:
> + * - STX - is start of transmission character
> + * - ETX - end of transmission
> + * - DATA - payload
> + * - CHECKSUM - checksum calculated on <DATA>
> + *
> + * If <DATA> or <CHECKSUM> contain one of control characters, then it is
> + * escaped using <DLE> control code. Added <DLE> does not participate in
> + * checksum calculation.
> + */
> +
> +/* #define DEBUG */
> +
> +#include <linux/atomic.h>
> +#include <linux/crc-ccitt.h>
> +#include <linux/delay.h>
> +#include <linux/export.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/sched.h>
> +#include <linux/serdev.h>
> +#include <linux/rave-sp.h>
> +
> +enum {
> +       STX = 0x02,
> +       ETX = 0x03,
> +       DLE = 0x10,
> +};
> +
> +enum {
> +       RAVE_SP_BOOT_SOURCE_GET = 0,
> +       RAVE_SP_BOOT_SOURCE_SET = 1,
> +
> +       RAVE_SP_MAX_DATA_SIZE   = 64,
> +       RAVE_SP_CHECKSUM_SIZE   = 2, /* Worst case scenariou on RDU2 */
> +       /*
> +        * We don't store STX, ETX and unescaped bytes, so Rx is only
> +        * DATA + CSUM
> +        */
> +       RAVE_SP_RX_BUFFER_SIZE  = RAVE_SP_MAX_DATA_SIZE +
> +                                 RAVE_SP_CHECKSUM_SIZE,
> +       RAVE_SP_STX_ETX_SIZE    = 2,
> +       /*
> +        * For Tx we have to have space for everything, STX, EXT and
> +        * potentially stuffed DATA + CSUM data + csum
> +        */
> +       RAVE_SP_TX_BUFFER_SIZE  = RAVE_SP_STX_ETX_SIZE +
> +                                 2 * RAVE_SP_RX_BUFFER_SIZE,
> +};
> +
> +enum rave_sp_deframer_state {
> +       RAVE_SP_EXPECT_SOF,
> +       RAVE_SP_EXPECT_DATA,
> +       RAVE_SP_EXPECT_ESCAPED_DATA,
> +};
> +
> +struct rave_sp_deframer {
> +       enum rave_sp_deframer_state state;
> +       unsigned char data[RAVE_SP_RX_BUFFER_SIZE];
> +       size_t length;
> +};
> +
> +struct rave_sp_reply {
> +       size_t length;
> +       void  *data;
> +       u8     code;
> +       u8     ackid;
> +       struct completion received;
> +};
> +
> +struct rave_sp_checksum {
> +       size_t length;
> +       void (*subroutine)(const u8 *, size_t, u8 *);
> +};
> +
> +enum rave_sp_boot_source {
> +       RAVE_SP_BOOT_SOURCE_SD          = 0,
> +       RAVE_SP_BOOT_SOURCE_EMMC        = 1,
> +       RAVE_SP_BOOT_SOURCE_NOR         = 2,
> +};
> +
> +struct rave_sp_variant {
> +       const struct rave_sp_checksum *checksum;
> +
> +       struct {
> +               int (*translate)(enum rave_sp_command);
> +               int (*get_boot_source)(struct rave_sp *);
> +               int (*set_boot_source)(struct rave_sp *,
> +                                      enum rave_sp_boot_source);
> +       } cmd;
> +
> +       void (*init)(struct rave_sp *);
> +
> +       struct attribute_group group;
> +};
> +
> +struct rave_sp {
> +       struct serdev_device *serdev;
> +
> +       struct rave_sp_deframer deframer;
> +       atomic_t ackid;
> +
> +       struct mutex bus_lock;
> +       struct mutex reply_lock;
> +       struct rave_sp_reply *reply;
> +
> +       const char *part_number_firmware;
> +       const char *part_number_bootloader;
> +
> +       const char *reset_reason;
> +       const char *copper_rev_rmb;
> +       const char *copper_rev_deb;
> +       const char *silicon_devid;
> +       const char *silicon_devrev;
> +
> +       const char *copper_mod_rmb;
> +       const char *copper_mod_deb;
> +
> +       const struct rave_sp_variant *variant;
> +
> +       struct blocking_notifier_head event_notifier_list;
> +
> +       struct attribute_group *group;
> +};
> +
> +struct rave_sp_rsp_status {
> +       u8 bl_bytes[6];
> +       u8 fw_bytes[6];
> +       u8 gs_format;
> +} __packed;
> +
> +static bool rave_sp_id_is_event(u8 code)
> +{
> +       return (code & 0xF0) == RAVE_SP_EVNT_BASE;
> +}
> +
> +static void
> +devm_rave_sp_unregister_event_notifier(struct device *dev, void *res)
> +{
> +       struct rave_sp *sp = dev_get_drvdata(dev->parent);
> +       struct notifier_block *nb = *(struct notifier_block **)res;
> +       struct blocking_notifier_head *bnh = &sp->event_notifier_list;
> +
> +       WARN_ON(blocking_notifier_chain_unregister(bnh, nb));
> +}
> +
> +int devm_rave_sp_register_event_notifier(struct device *dev,
> +                                        struct notifier_block *nb)
> +{
> +       struct rave_sp *sp = dev_get_drvdata(dev->parent);
> +       struct notifier_block **rcnb;
> +       int ret;
> +
> +       rcnb = devres_alloc(devm_rave_sp_unregister_event_notifier,
> +                           sizeof(*rcnb), GFP_KERNEL);
> +       if (!rcnb)
> +               return -ENOMEM;
> +
> +       ret = blocking_notifier_chain_register(&sp->event_notifier_list, nb);
> +       if (!ret) {
> +               *rcnb = nb;
> +               devres_add(dev, rcnb);
> +       } else {
> +               devres_free(rcnb);
> +       }
> +
> +       return ret;
> +}
> +EXPORT_SYMBOL_GPL(devm_rave_sp_register_event_notifier);
> +
> +static const char *devm_rave_sp_version(struct device *dev, const char *buf)
> +{
> +       return devm_kasprintf(dev, GFP_KERNEL, "%02d%02d%02d.%c%c\n",
> +                             buf[0], le16_to_cpup((const __le16 *)&buf[1]),
> +                             buf[3], buf[4], buf[5]);
> +}
> +
> +static int rave_sp_get_status(struct rave_sp *sp,
> +                             struct rave_sp_rsp_status *status)
> +{
> +       u8 cmd[] = {
> +               [0] = RAVE_SP_CMD_STATUS,
> +               [1] = 0
> +       };
> +       return rave_sp_exec(sp, cmd, sizeof(cmd), &status, sizeof(status));

Ugh, found a bug in my code, should be:

return rave_sp_exec(sp, cmd, sizeof(cmd), status, sizeof(*status));

will be fixed in v2.

Sorry for missing that!

Andrey
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH] mfd: Add driver for RAVE Supervisory Processor
  2017-06-06 18:06 [PATCH] mfd: Add driver for RAVE Supervisory Processor Andrey Smirnov
       [not found] ` <20170606180643.14258-1-andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
@ 2017-06-07  8:41 ` Lucas Stach
       [not found]   ` <1496824875.30073.123.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
  2017-06-08 13:38 ` kbuild test robot
  2017-06-09 13:49 ` Rob Herring
  3 siblings, 1 reply; 7+ messages in thread
From: Lucas Stach @ 2017-06-07  8:41 UTC (permalink / raw)
  To: Andrey Smirnov
  Cc: Lee Jones, cphealy, Nikita Yushchenko, Rob Herring, Mark Rutland,
	devicetree, linux-kernel

Hi Andrey,

no code review, just 2 drive-by comments.

Am Dienstag, den 06.06.2017, 11:06 -0700 schrieb Andrey Smirnov:
> Add a driver for RAVE Supervisory Processor, an MCU implementing
> varoius bits of housekeeping functionality (watchdoging, backlight
> control, LED control, etc) on RAVE family of products by Zodiac
> Inflight Innovations.
> 
> This driver implementes core MFD/serdev device as well as
> communication subroutines necessary for commanding the device.
> 
> Cc: cphealy@gmail.com
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
[...]

> +++ b/drivers/mfd/rave-sp.c
> @@ -0,0 +1,1009 @@
> +/*
> + * rave-sp.c - Multifunction core driver for Zodiac Inflight Innovations
> + * SP MCU that is connected via dedicated UART port
> + *
> + * Copyright (C) 2017 Zodiac Inflight Innovations
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, see <http://www.gnu.org/licenses/>.
> + */

[...]

> +MODULE_DEVICE_TABLE(of, rave_sp_dt_ids);
> +MODULE_LICENSE("GPL");

Header says GPL v2, so this should be changed to match.

[...]
> +
> +#define COMPATIBLE_RAVE_SP_NIU		"zii,rave-sp-niu"
> +#define COMPATIBLE_RAVE_SP_MEZZ		"zii,rave-sp-mezz"
> +#define COMPATIBLE_RAVE_SP_ESB		"zii,rave-sp-esb"
> +#define COMPATIBLE_RAVE_SP_RDU1		"zii,rave-sp-rdu1"
> +#define COMPATIBLE_RAVE_SP_RDU2		"zii,rave-sp-rdu2"

Can we get rid of those defines? They are only used in the of_device_id
table.

Regards,
Lucas

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH] mfd: Add driver for RAVE Supervisory Processor
  2017-06-06 18:06 [PATCH] mfd: Add driver for RAVE Supervisory Processor Andrey Smirnov
       [not found] ` <20170606180643.14258-1-andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
  2017-06-07  8:41 ` Lucas Stach
@ 2017-06-08 13:38 ` kbuild test robot
  2017-06-09 13:49 ` Rob Herring
  3 siblings, 0 replies; 7+ messages in thread
From: kbuild test robot @ 2017-06-08 13:38 UTC (permalink / raw)
  Cc: kbuild-all, Lee Jones, Andrey Smirnov, cphealy, Lucas Stach,
	Nikita Yushchenko, Rob Herring, Mark Rutland, devicetree,
	linux-kernel

[-- Attachment #1: Type: text/plain, Size: 6249 bytes --]

Hi Andrey,

[auto build test WARNING on ljones-mfd/for-mfd-next]
[also build test WARNING on v4.12-rc4 next-20170608]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Andrey-Smirnov/mfd-Add-driver-for-RAVE-Supervisory-Processor/20170607-194515
base:   https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git for-mfd-next
config: tile-allmodconfig (attached as .config)
compiler: tilegx-linux-gcc (GCC) 4.6.2
reproduce:
        wget https://raw.githubusercontent.com/01org/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=tile 

All warnings (new ones prefixed by >>):

   drivers//mfd/rave-sp.c: In function 'csum_ccitt':
   drivers//mfd/rave-sp.c:395:2: error: implicit declaration of function 'crc_ccitt_false'
   drivers//mfd/rave-sp.c: In function 'rave_sp_receive_reply':
>> drivers//mfd/rave-sp.c:542:3: warning: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'size_t'
   drivers//mfd/rave-sp.c:542:3: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'size_t'
   cc1: some warnings being treated as errors

vim +542 drivers//mfd/rave-sp.c

   389		*crc = 1 + ~(*crc);
   390	}
   391	
   392	static void csum_ccitt(const u8 *buf, size_t size, u8 *crc)
   393	{
   394	
 > 395		const u16 calculated = crc_ccitt_false(0xffff, buf, size);
   396	
   397		*(__le16 *)crc = cpu_to_be16(calculated);
   398	}
   399	
   400	static void *stuff(unsigned char *dest, const unsigned char *src, size_t n)
   401	{
   402		size_t i;
   403	
   404		for (i = 0; i < n; i++) {
   405			const unsigned char byte = *src++;
   406	
   407			switch (byte) {
   408			case STX:
   409			case ETX:
   410			case DLE:
   411				*dest++ = DLE;
   412			default:
   413				*dest++ = byte;
   414			}
   415		}
   416	
   417		return dest;
   418	}
   419	
   420	static int rave_sp_write(struct rave_sp *sp, const u8 *data, u8 data_size)
   421	{
   422		size_t length;
   423		const size_t checksum_length = sp->variant->checksum->length;
   424		unsigned char crc[checksum_length];
   425		unsigned char frame[RAVE_SP_TX_BUFFER_SIZE];
   426		unsigned char *dest = frame;
   427	
   428		if (WARN_ON(data_size > sizeof(frame)))
   429			return -ENOMEM;
   430	
   431		sp->variant->checksum->subroutine(data, data_size, crc);
   432	
   433		*dest++ = STX;
   434		dest = stuff(dest, data, data_size);
   435		dest = stuff(dest, crc, checksum_length);
   436		*dest++ = ETX;
   437	
   438		length = dest - frame;
   439	
   440		print_hex_dump(KERN_DEBUG, "rave-sp tx: ", DUMP_PREFIX_NONE,
   441			       16, 1, frame, length, false);
   442	
   443		return serdev_device_write(sp->serdev, frame, length, HZ);
   444	}
   445	
   446	static u8 rave_sp_reply_code(u8 command)
   447	{
   448		switch (command) {
   449		case 0xA0 ... 0xBE:
   450			return command + 0x20;
   451		case 0xE0 ... 0xEF:
   452			return command | 0x01;
   453		default:
   454			return command + 0x40;
   455		}
   456	}
   457	
   458	int rave_sp_exec(struct rave_sp *sp,
   459			 void *__data,  size_t data_size,
   460			 void *reply_data, size_t reply_data_size)
   461	{
   462		int ret = 0;
   463		unsigned char *data = __data;
   464		const u8 ackid = (u8)atomic_inc_return(&sp->ackid);
   465		const int command = sp->variant->cmd.translate(data[0]);
   466		struct rave_sp_reply reply = {
   467			.code     = rave_sp_reply_code((u8)command),
   468			.ackid    = ackid,
   469			.data     = reply_data,
   470			.length   = reply_data_size,
   471			.received = COMPLETION_INITIALIZER_ONSTACK(reply.received),
   472		};
   473	
   474		if (command < 0)
   475			return command;
   476	
   477		mutex_lock(&sp->bus_lock);
   478	
   479		mutex_lock(&sp->reply_lock);
   480		sp->reply = &reply;
   481		mutex_unlock(&sp->reply_lock);
   482	
   483		data[0] = (u8)command;
   484		data[1] = ackid;
   485	
   486		rave_sp_write(sp, data, data_size);
   487	
   488		if (!wait_for_completion_timeout(&reply.received, HZ)) {
   489			dev_err(&sp->serdev->dev, "Command timeout\n");
   490			ret = -ETIMEDOUT;
   491	
   492			mutex_lock(&sp->reply_lock);
   493			sp->reply = NULL;
   494			mutex_unlock(&sp->reply_lock);
   495		}
   496	
   497		mutex_unlock(&sp->bus_lock);
   498		return ret;
   499	}
   500	EXPORT_SYMBOL(rave_sp_exec);
   501	
   502	static void rave_sp_receive_event(struct rave_sp *sp,
   503					  const unsigned char *data, size_t length)
   504	{
   505		u8 cmd[] = {
   506			[0] = rave_sp_reply_code(data[0]),
   507			[1] = data[1],
   508		};
   509	
   510		rave_sp_write(sp, cmd, sizeof(cmd));
   511	
   512		blocking_notifier_call_chain(&sp->event_notifier_list,
   513					     rave_sp_action(data[0], data[2]),
   514					     NULL);
   515	}
   516	
   517	static void rave_sp_receive_reply(struct rave_sp *sp,
   518					  const unsigned char *data, size_t length)
   519	{
   520		struct device *dev = &sp->serdev->dev;
   521		struct rave_sp_reply *reply;
   522		const  size_t payload_length = length - 2;
   523	
   524		mutex_lock(&sp->reply_lock);
   525		reply = sp->reply;
   526	
   527		if (reply && reply->code == data[0] && reply->ackid == data[1] &&
   528		    payload_length >= reply->length) {
   529			/*
   530			 * We are relying on memcpy(dst, src, 0) to be a no-op
   531			 * when handling commands that have a no-payload reply
   532			 */
   533			memcpy(reply->data, &data[2], reply->length);
   534			complete(&reply->received);
   535			sp->reply = NULL;
   536		} else {
   537			dev_err(dev, "Ignoring incorrect reply\n");
   538			dev_dbg(dev, "Code:   expected = 0x%08x received = 0x%08x\n",
   539				reply->code, data[0]);
   540			dev_dbg(dev, "ACK ID: expected = 0x%08x received = 0x%08x\n",
   541				reply->ackid, data[1]);
 > 542			dev_dbg(dev, "Length: expected = %u received = %u\n",
   543				reply->length, payload_length);
   544		}
   545	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 50846 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH] mfd: Add driver for RAVE Supervisory Processor
  2017-06-06 18:06 [PATCH] mfd: Add driver for RAVE Supervisory Processor Andrey Smirnov
                   ` (2 preceding siblings ...)
  2017-06-08 13:38 ` kbuild test robot
@ 2017-06-09 13:49 ` Rob Herring
  2017-06-13  0:28   ` Andrey Smirnov
  3 siblings, 1 reply; 7+ messages in thread
From: Rob Herring @ 2017-06-09 13:49 UTC (permalink / raw)
  To: Andrey Smirnov
  Cc: Lee Jones, cphealy, Lucas Stach, Nikita Yushchenko, Mark Rutland,
	devicetree, linux-kernel

On Tue, Jun 06, 2017 at 11:06:43AM -0700, Andrey Smirnov wrote:
> Add a driver for RAVE Supervisory Processor, an MCU implementing
> varoius bits of housekeeping functionality (watchdoging, backlight
> control, LED control, etc) on RAVE family of products by Zodiac
> Inflight Innovations.
> 
> This driver implementes core MFD/serdev device as well as
> communication subroutines necessary for commanding the device.
> 
> Cc: cphealy@gmail.com
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
> 
> Note that the driver for "zii,rave-sp-watchdog" exists, but I haven't
> submitted it yet, becuase I wanted to make sure that API exposed by
> this MFD is acceptable and doesn't need drastic changes
> 
>  .../devicetree/bindings/mfd/zii,rave-sp.txt        |   33 +
>  drivers/mfd/Kconfig                                |    9 +
>  drivers/mfd/Makefile                               |    1 +
>  drivers/mfd/rave-sp.c                              | 1009 ++++++++++++++++++++
>  include/linux/rave-sp.h                            |   54 ++
>  5 files changed, 1106 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
>  create mode 100644 drivers/mfd/rave-sp.c
>  create mode 100644 include/linux/rave-sp.h
> 
> diff --git a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
> new file mode 100644
> index 0000000..46a904c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
> @@ -0,0 +1,33 @@
> +Zodiac Inflight Innovations RAVE Supervisory Processor
> +
> +Required parent device properties:
> +
> + - compatible: Should be one of:
> +	- "zii,rave-sp-niu"
> +	- "zii,rave-sp-mezz"
> +	- "zii,rave-sp-esb"
> +	- "zii,rave-sp-rdu1"
> +	- "zii,rave-sp-rdu2"
> +
> + - current-speed: Should be set to baud rate SP device is using
> +

Please clarify that this must be a child of a serial device node.

> +RAVE SP consists of the following sub-devices:
> +
> +Device				 Description
> +------				 -----------
> +rave-sp-wdt			: Watchdog
> +
> +
> +Example of usage:
> +
> +	rdu {
> +		compatible = "zii,rave-sp-rdu2";
> +		current-speed = <1000000>;
> +		status = "okay";

Don't show status in examples.

> +
> +		watchdog {
> +			compatible = "zii,rave-sp-watchdog";
> +			status = "okay";
> +		};
> +	};
> +

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH] mfd: Add driver for RAVE Supervisory Processor
       [not found]   ` <1496824875.30073.123.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
@ 2017-06-13  0:28     ` Andrey Smirnov
  0 siblings, 0 replies; 7+ messages in thread
From: Andrey Smirnov @ 2017-06-13  0:28 UTC (permalink / raw)
  To: Lucas Stach
  Cc: Lee Jones, Chris Healy, Nikita Yushchenko, Rob Herring,
	Mark Rutland, devicetree-u79uwXL29TY76Z2rM5mHXA, linux-kernel

On Wed, Jun 7, 2017 at 1:41 AM, Lucas Stach <l.stach-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> wrote:
> Hi Andrey,
>
> no code review, just 2 drive-by comments.
>
> Am Dienstag, den 06.06.2017, 11:06 -0700 schrieb Andrey Smirnov:
>> Add a driver for RAVE Supervisory Processor, an MCU implementing
>> varoius bits of housekeeping functionality (watchdoging, backlight
>> control, LED control, etc) on RAVE family of products by Zodiac
>> Inflight Innovations.
>>
>> This driver implementes core MFD/serdev device as well as
>> communication subroutines necessary for commanding the device.
>>
>> Cc: cphealy-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
>> Cc: Lucas Stach <l.stach-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
>> Cc: Nikita Yushchenko <nikita.yoush-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
>> Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
>> Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
>> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> Signed-off-by: Andrey Smirnov <andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> ---
> [...]
>
>> +++ b/drivers/mfd/rave-sp.c
>> @@ -0,0 +1,1009 @@
>> +/*
>> + * rave-sp.c - Multifunction core driver for Zodiac Inflight Innovations
>> + * SP MCU that is connected via dedicated UART port
>> + *
>> + * Copyright (C) 2017 Zodiac Inflight Innovations
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, see <http://www.gnu.org/licenses/>.
>> + */
>
> [...]
>
>> +MODULE_DEVICE_TABLE(of, rave_sp_dt_ids);
>> +MODULE_LICENSE("GPL");
>
> Header says GPL v2, so this should be changed to match.
>

OK, will fix in v2.

> [...]
>> +
>> +#define COMPATIBLE_RAVE_SP_NIU               "zii,rave-sp-niu"
>> +#define COMPATIBLE_RAVE_SP_MEZZ              "zii,rave-sp-mezz"
>> +#define COMPATIBLE_RAVE_SP_ESB               "zii,rave-sp-esb"
>> +#define COMPATIBLE_RAVE_SP_RDU1              "zii,rave-sp-rdu1"
>> +#define COMPATIBLE_RAVE_SP_RDU2              "zii,rave-sp-rdu2"
>
> Can we get rid of those defines? They are only used in the of_device_id
> table.

Those defines are used by drivers for MFD cells, because,
unfortunately, communication protocols differ for between hardware
versions. So instead of having, say, "zii,rave-sp-watchdog-rdu2",
"zii,rave-sp-watchdog-rdu1", etc. I use "zii,rave-sp-watchdog" and
"compatible" from MFD parent to determine what protocol to use. I am
happy to change that if that doesn't seem like a good idea.

Thanks,
Andrey Smirnov
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH] mfd: Add driver for RAVE Supervisory Processor
  2017-06-09 13:49 ` Rob Herring
@ 2017-06-13  0:28   ` Andrey Smirnov
  0 siblings, 0 replies; 7+ messages in thread
From: Andrey Smirnov @ 2017-06-13  0:28 UTC (permalink / raw)
  To: Rob Herring
  Cc: Lee Jones, Chris Healy, Lucas Stach, Nikita Yushchenko,
	Mark Rutland, devicetree, linux-kernel

On Fri, Jun 9, 2017 at 6:49 AM, Rob Herring <robh@kernel.org> wrote:
> On Tue, Jun 06, 2017 at 11:06:43AM -0700, Andrey Smirnov wrote:
>> Add a driver for RAVE Supervisory Processor, an MCU implementing
>> varoius bits of housekeeping functionality (watchdoging, backlight
>> control, LED control, etc) on RAVE family of products by Zodiac
>> Inflight Innovations.
>>
>> This driver implementes core MFD/serdev device as well as
>> communication subroutines necessary for commanding the device.
>>
>> Cc: cphealy@gmail.com
>> Cc: Lucas Stach <l.stach@pengutronix.de>
>> Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Cc: devicetree@vger.kernel.org
>> Cc: linux-kernel@vger.kernel.org
>> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
>> ---
>>
>> Note that the driver for "zii,rave-sp-watchdog" exists, but I haven't
>> submitted it yet, becuase I wanted to make sure that API exposed by
>> this MFD is acceptable and doesn't need drastic changes
>>
>>  .../devicetree/bindings/mfd/zii,rave-sp.txt        |   33 +
>>  drivers/mfd/Kconfig                                |    9 +
>>  drivers/mfd/Makefile                               |    1 +
>>  drivers/mfd/rave-sp.c                              | 1009 ++++++++++++++++++++
>>  include/linux/rave-sp.h                            |   54 ++
>>  5 files changed, 1106 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
>>  create mode 100644 drivers/mfd/rave-sp.c
>>  create mode 100644 include/linux/rave-sp.h
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
>> new file mode 100644
>> index 0000000..46a904c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/zii,rave-sp.txt
>> @@ -0,0 +1,33 @@
>> +Zodiac Inflight Innovations RAVE Supervisory Processor
>> +
>> +Required parent device properties:
>> +
>> + - compatible: Should be one of:
>> +     - "zii,rave-sp-niu"
>> +     - "zii,rave-sp-mezz"
>> +     - "zii,rave-sp-esb"
>> +     - "zii,rave-sp-rdu1"
>> +     - "zii,rave-sp-rdu2"
>> +
>> + - current-speed: Should be set to baud rate SP device is using
>> +
>
> Please clarify that this must be a child of a serial device node.

OK, will fix in v2.

>
>> +RAVE SP consists of the following sub-devices:
>> +
>> +Device                                Description
>> +------                                -----------
>> +rave-sp-wdt                  : Watchdog
>> +
>> +
>> +Example of usage:
>> +
>> +     rdu {
>> +             compatible = "zii,rave-sp-rdu2";
>> +             current-speed = <1000000>;
>> +             status = "okay";
>
> Don't show status in examples.
>

OK, will fix in v2.

Thanks,
Andrey Smirnov

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2017-06-13  0:28 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-06-06 18:06 [PATCH] mfd: Add driver for RAVE Supervisory Processor Andrey Smirnov
     [not found] ` <20170606180643.14258-1-andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-06-07  1:26   ` Andrey Smirnov
2017-06-07  8:41 ` Lucas Stach
     [not found]   ` <1496824875.30073.123.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2017-06-13  0:28     ` Andrey Smirnov
2017-06-08 13:38 ` kbuild test robot
2017-06-09 13:49 ` Rob Herring
2017-06-13  0:28   ` Andrey Smirnov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).