From: Mark Yao <mark.yao@rock-chips.com>
To: Mark Yao <mark.yao@rock-chips.com>,
David Airlie <airlied@linux.ie>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Heiko Stuebner <heiko@sntech.de>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
dri-devel@lists.freedesktop.org,
linux-rockchip@lists.infradead.org
Subject: [PATCH v3 2/3] drm/rockchip: dw_hdmi: introduce the VPLL clock setting
Date: Fri, 9 Jun 2017 15:10:41 +0800 [thread overview]
Message-ID: <1496992242-10681-1-git-send-email-mark.yao@rock-chips.com> (raw)
In-Reply-To: <1496992228-10582-1-git-send-email-mark.yao@rock-chips.com>
For RK3399 HDMI, there is an external clock need for HDMI PHY,
and it should keep the same clock rate with VOP DCLK.
VPLL have supported the clock for HDMI PHY, but there is no
clock divider bewteen VPLL and HDMI PHY. So we need to set the
VPLL rate manually in HDMI driver.
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
---
Changes in v3: none
Changes in v2: describe vpll on Documentation.
.../bindings/display/rockchip/dw_hdmi-rockchip.txt | 2 +-
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 25 +++++++++++++++++++++-
2 files changed, 25 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
index 495bcf5..779e8ac 100644
--- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
@@ -31,7 +31,7 @@ Optional properties
I2C master controller.
- clock-names: See dw_hdmi.txt. The "cec" clock is optional.
- clock-names: May contain "cec" as defined in dw_hdmi.txt.
-
+- clock-names: May contain "vpll", external clock for some hdmi phy.
Example:
diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 90aaaf4..aaa0f3e 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -7,10 +7,12 @@
* (at your option) any later version.
*/
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
+
#include <drm/drm_of.h>
#include <drm/drmP.h>
#include <drm/drm_crtc_helper.h>
@@ -44,6 +46,7 @@ struct rockchip_hdmi {
struct regmap *regmap;
struct drm_encoder encoder;
const struct rockchip_hdmi_chip_data *chip_data;
+ struct clk *vpll_clk;
};
#define to_rockchip_hdmi(x) container_of(x, struct rockchip_hdmi, x)
@@ -160,6 +163,7 @@ struct rockchip_hdmi {
static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
{
struct device_node *np = hdmi->dev->of_node;
+ int ret;
hdmi->regmap = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
if (IS_ERR(hdmi->regmap)) {
@@ -167,6 +171,22 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
return PTR_ERR(hdmi->regmap);
}
+ hdmi->vpll_clk = devm_clk_get(hdmi->dev, "vpll");
+ if (PTR_ERR(hdmi->vpll_clk) == -ENOENT) {
+ hdmi->vpll_clk = NULL;
+ } else if (PTR_ERR(hdmi->vpll_clk) == -EPROBE_DEFER) {
+ return -EPROBE_DEFER;
+ } else if (IS_ERR(hdmi->vpll_clk)) {
+ dev_err(hdmi->dev, "failed to get grf clock\n");
+ return PTR_ERR(hdmi->vpll_clk);
+ }
+
+ ret = clk_prepare_enable(hdmi->vpll_clk);
+ if (ret) {
+ dev_err(hdmi->dev, "Failed to enable HDMI vpll: %d\n", ret);
+ return ret;
+ }
+
return 0;
}
@@ -209,6 +229,9 @@ static void dw_hdmi_rockchip_encoder_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adj_mode)
{
+ struct rockchip_hdmi *hdmi = to_rockchip_hdmi(encoder);
+
+ clk_set_rate(hdmi->vpll_clk, adj_mode->clock * 1000);
}
static void dw_hdmi_rockchip_encoder_enable(struct drm_encoder *encoder)
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-06-09 7:10 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-09 7:10 [PATCH v3 0/3] Add RK3399 HDMI Support Mark Yao
2017-06-09 7:10 ` [PATCH v3 1/3] drm/rockchip: dw_hdmi: add RK3399 HDMI support Mark Yao
2017-06-14 15:32 ` Rob Herring
[not found] ` <1496992236-10634-1-git-send-email-mark.yao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-06-22 7:17 ` [PATCH v3.1 " Mark Yao
2017-06-22 7:31 ` Heiko Stuebner
2017-06-22 8:02 ` Mark yao
2017-06-22 8:25 ` Heiko Stuebner
2017-06-22 17:04 ` Rob Herring
2017-06-09 7:10 ` Mark Yao [this message]
2017-06-14 15:35 ` [PATCH v3 2/3] drm/rockchip: dw_hdmi: introduce the VPLL clock setting Rob Herring
2017-06-09 7:10 ` [PATCH v3 3/3] drm/rockchip: dw_hdmi: introduce the pclk for grf Mark Yao
[not found] ` <1496992247-10727-1-git-send-email-mark.yao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-06-14 18:38 ` Rob Herring
[not found] ` <1496992228-10582-1-git-send-email-mark.yao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-06-23 1:04 ` [PATCH v3 0/3] Add RK3399 HDMI Support Mark yao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1496992242-10681-1-git-send-email-mark.yao@rock-chips.com \
--to=mark.yao@rock-chips.com \
--cc=airlied@linux.ie \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).