From mboxrd@z Thu Jan 1 00:00:00 1970 From: Steve Longerbeam Subject: [PATCH 05/11] ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround Date: Mon, 12 Jun 2017 11:23:58 -0700 Message-ID: <1497291844-14632-6-git-send-email-steve_longerbeam@mentor.com> References: <1497291844-14632-1-git-send-email-steve_longerbeam@mentor.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1497291844-14632-1-git-send-email-steve_longerbeam@mentor.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Shawn Guo , Sascha Hauer , Fabio Estevam , Rob Herring , Mark Rutland , Russell King Cc: devicetree@vger.kernel.org, Steve Longerbeam , linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org There is a pin conflict with GPIO_6. This pin functions as a power input pin to the OV5642 camera sensor, but ENET uses it as the h/w workaround for erratum ERR006687, to wake-up the ARM cores on normal RX and TX packet done events. So we need to remove the h/w workaround to support the OV5642. The result is that the CPUidle driver will no longer allow entering the deep idle states on the sabrelite. This is a partial revert of commit 6261c4c8f13e ("ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt.") commit a28eeb43ee57 ("ARM: dts: imx6: tag boards that have the HW workaround for ERR006687") Signed-off-by: Steve Longerbeam --- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 8413179..89dce27 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -270,9 +270,6 @@ txd1-skew-ps = <0>; txd2-skew-ps = <0>; txd3-skew-ps = <0>; - interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, - <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; - fsl,err006687-workaround-present; status = "okay"; }; @@ -373,7 +370,6 @@ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 /* Phy reset */ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x000b0 - MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 >; }; -- 2.7.4