From: Suzuki K Poulose <suzuki.poulose@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, mathieu.poirier@linaro.org,
Suzuki K Poulose <suzuki.poulose@arm.com>,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Pratik Patel <pratikp@codeaurora.org>,
"Ivan T . Ivanov" <ivan.ivanov@linaro.org>
Subject: [PATCH v2 01/12] coresight replicator: Cleanup programmable replicator naming
Date: Mon, 26 Jun 2017 16:22:45 +0100 [thread overview]
Message-ID: <1498490576-1350-2-git-send-email-suzuki.poulose@arm.com> (raw)
In-Reply-To: <1498490576-1350-1-git-send-email-suzuki.poulose@arm.com>
The Linux coresight drivers define the programmable ATB replicator as
Qualcom replicator, while this is designed by ARM. This can cause confusion
to a user selecting the driver. Cleanup all references to make it
explicitly clear. This patch :
1) Replace the compatible string for the replicator :
qcom,coresight-replicator1x => arm,coresight-dynamic-replicator
2) Changes the Kconfig symbol (since this is not part of any defconfigs)
CORESIGHT_QCOM_REPLICATOR => CORESIGHT_DYNAMIC_REPLICATOR
3) Improves the help message in the Kconfig.
4) Changes the name of the driver and the file :
coresight-replicator-qcom => coresight-dynamic-replicator
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
Changes since V1:
- Since the driver doesn't use the compatible string, change the
recommended compatible string.
- Rename the driver file to coresight-dynamic-replicator.c
---
Documentation/devicetree/bindings/arm/coresight.txt | 4 ++--
drivers/hwtracing/coresight/Kconfig | 10 +++++-----
drivers/hwtracing/coresight/Makefile | 2 +-
...esight-replicator-qcom.c => coresight-dynamic-replicator.c} | 5 ++---
4 files changed, 10 insertions(+), 11 deletions(-)
rename drivers/hwtracing/coresight/{coresight-replicator-qcom.c => coresight-dynamic-replicator.c} (97%)
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index fcbae6a..15ac8e8 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -34,8 +34,8 @@ its hardware characteristcs.
- Embedded Trace Macrocell (version 4.x):
"arm,coresight-etm4x", "arm,primecell";
- - Qualcomm Configurable Replicator (version 1.x):
- "qcom,coresight-replicator1x", "arm,primecell";
+ - Coresight programmable Replicator :
+ "arm,coresight-dynamic-replicator", "arm,primecell";
- System Trace Macrocell:
"arm,coresight-stm", "arm,primecell"; [1]
diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig
index 8d55d6d..ef9cb3c 100644
--- a/drivers/hwtracing/coresight/Kconfig
+++ b/drivers/hwtracing/coresight/Kconfig
@@ -70,13 +70,13 @@ config CORESIGHT_SOURCE_ETM4X
for instruction level tracing. Depending on the implemented version
data tracing may also be available.
-config CORESIGHT_QCOM_REPLICATOR
- bool "Qualcomm CoreSight Replicator driver"
+config CORESIGHT_DYNAMIC_REPLICATOR
+ bool "CoreSight Programmable Replicator driver"
depends on CORESIGHT_LINKS_AND_SINKS
help
- This enables support for Qualcomm CoreSight link driver. The
- programmable ATB replicator sends the ATB trace stream from the
- ETB/ETF to the TPIUi and ETR.
+ This enables support for dynamic CoreSight replicator link driver.
+ The programmable ATB replicator allows independent filtering of the
+ trace data based on the traceid.
config CORESIGHT_STM
bool "CoreSight System Trace Macrocell driver"
diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile
index 433d590..5bae90ce 100644
--- a/drivers/hwtracing/coresight/Makefile
+++ b/drivers/hwtracing/coresight/Makefile
@@ -14,6 +14,6 @@ obj-$(CONFIG_CORESIGHT_SOURCE_ETM3X) += coresight-etm3x.o coresight-etm-cp14.o \
coresight-etm3x-sysfs.o
obj-$(CONFIG_CORESIGHT_SOURCE_ETM4X) += coresight-etm4x.o \
coresight-etm4x-sysfs.o
-obj-$(CONFIG_CORESIGHT_QCOM_REPLICATOR) += coresight-replicator-qcom.o
+obj-$(CONFIG_CORESIGHT_DYNAMIC_REPLICATOR) += coresight-dynamic-replicator.o
obj-$(CONFIG_CORESIGHT_STM) += coresight-stm.o
obj-$(CONFIG_CORESIGHT_CPU_DEBUG) += coresight-cpu-debug.o
diff --git a/drivers/hwtracing/coresight/coresight-replicator-qcom.c b/drivers/hwtracing/coresight/coresight-dynamic-replicator.c
similarity index 97%
rename from drivers/hwtracing/coresight/coresight-replicator-qcom.c
rename to drivers/hwtracing/coresight/coresight-dynamic-replicator.c
index 0a3d15f..1675031 100644
--- a/drivers/hwtracing/coresight/coresight-replicator-qcom.c
+++ b/drivers/hwtracing/coresight/coresight-dynamic-replicator.c
@@ -143,7 +143,7 @@ static int replicator_probe(struct amba_device *adev, const struct amba_id *id)
if (IS_ERR(drvdata->csdev))
return PTR_ERR(drvdata->csdev);
- dev_info(dev, "%s initialized\n", (char *)id->data);
+ dev_info(dev, "initialized\n");
return 0;
}
@@ -179,14 +179,13 @@ static struct amba_id replicator_ids[] = {
{
.id = 0x0003b909,
.mask = 0x0003ffff,
- .data = "REPLICATOR 1.0",
},
{ 0, 0 },
};
static struct amba_driver replicator_driver = {
.drv = {
- .name = "coresight-replicator-qcom",
+ .name = "coresight-dynamic-replicator",
.pm = &replicator_dev_pm_ops,
.suppress_bind_attrs = true,
},
--
2.7.5
next parent reply other threads:[~2017-06-26 15:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1498490576-1350-1-git-send-email-suzuki.poulose@arm.com>
2017-06-26 15:22 ` Suzuki K Poulose [this message]
[not found] ` <1498490576-1350-2-git-send-email-suzuki.poulose-5wv7dgnIgG8@public.gmane.org>
2017-06-28 16:33 ` [PATCH v2 01/12] coresight replicator: Cleanup programmable replicator naming Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1498490576-1350-2-git-send-email-suzuki.poulose@arm.com \
--to=suzuki.poulose@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=ivan.ivanov@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mathieu.poirier@linaro.org \
--cc=pratikp@codeaurora.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).