[PATCH 6/6] Documentation/devicetree: Add FSI-attached I2C master dt bindings

[Eddie James <eajames@linux.vnet.ibm.com>]

From: "Edward A. James" <eajames@us.ibm.com>

Document the bindings.

Signed-off-by: Edward A. James <eajames@us.ibm.com>
---
 Documentation/devicetree/bindings/i2c/i2c-fsi.txt | 31 +++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-fsi.txt

diff --git a/Documentation/devicetree/bindings/i2c/i2c-fsi.txt b/Documentation/devicetree/bindings/i2c/i2c-fsi.txt
new file mode 100644
index 0000000..fffc067
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-fsi.txt
@@ -0,0 +1,31 @@
+Device-tree bindings for FSI-attached I2C master driver
+-------------------------------------------------------
+
+Required properties:
+ - compatible = "ibm,i2cm-fsi";
+ - reg = < address size >;		: The FSI CFAM address and address space
+					  size.
+ - #address-cells = <1>;		: Number of address cells in child nodes
+ - #size-cells = <0>;			: Number of size cells in child nodes.
+ - child nodes				: Nodes to describe ports off the I2C
+					  master.
+
+Child node required properties:
+ - reg = < port number >		: The port number on the I2C master.
+
+Examples:
+
+    i2cm@1800 {
+        compatible = "ibm,i2cm-fsi";
+        reg = < 0x1800 0x400 >;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+            reg = <0>;
+        };
+
+        port@1 {
+            reg = <1>;
+        };
+    };
-- 
1.8.3.1