From: Varadarajan Narayanan <varada@codeaurora.org>
To: robh+dt@kernel.org, mark.rutland@arm.com,
mturquette@baylibre.com, sboyd@codeaurora.org,
linus.walleij@linaro.org, andy.gross@linaro.org,
david.brown@linaro.org, catalin.marinas@arm.com,
will.deacon@arm.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: absahu@codeaurora.org, sjaganat@codeaurora.org,
sricharan@codeaurora.org,
Varadarajan Narayanan <varada@codeaurora.org>
Subject: [PATCH v7 0/4] Add minimal boot support for IPQ8074
Date: Thu, 29 Jun 2017 11:48:30 +0530 [thread overview]
Message-ID: <1498717114-338-1-git-send-email-varada@codeaurora.org> (raw)
v7:
Remove the following clk related patches (Stephen Boyd has picked them)
Incorporate Bjorn's comment in
arm64: dts: Add ipq8074 SoC and HK01 board support
Included Bjorn's and Rob's Ack for rest of the patches.
v6:
* Include Rob's Ack to the first patch.
v5:
* Removed the 'NA' binding from documentation
v4:
* Split the clock patch and addressed a minor comment
in the clock driver as per stephen's feedback.
v3:
* Addressed review feedback from Bjorn for pinctrl
- Unified the names for qpic pads.
- Corrected the names for pwm pins.
* Updated pinctrl documentation.
* Updated the default bootargs in ipq8074-hk01.dts.
* Updated the gcc clocks driver for removing the
unused halt_bit in few places.
v2:
* Addressed review feedback from Stephen
- Removed cpu-map entries
- Added mmio-timer nodes
* Fix sparse warnings in the gcc-ipq8074.c
* Updated pinctrl documentation
v1:
https://www.spinics.net/lists/kernel/msg2498734.html
This series adds minimal board boot support for ipq8074-hk01
board.
Abhishek Sahu (1):
arm64: defconfig: Enable qcom ipq8074 clock and pinctrl
Varadarajan Narayanan (3):
pinctrl: qcom: Add ipq8074 pinctrl driver
dt-bindings: qcom: Add ipq8074 bindings
arm64: dts: Add ipq8074 SoC and HK01 board support
Documentation/devicetree/bindings/arm/qcom.txt | 2 +
.../bindings/pinctrl/qcom,ipq8074-pinctrl.txt | 172 ++++
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 52 +
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 194 ++++
arch/arm64/configs/defconfig | 2 +
drivers/pinctrl/qcom/Kconfig | 10 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-ipq8074.c | 1076 ++++++++++++++++++++
9 files changed, 1510 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074.dtsi
create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq8074.c
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next reply other threads:[~2017-06-29 6:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-29 6:18 Varadarajan Narayanan [this message]
2017-06-29 6:18 ` [PATCH v7 1/4] pinctrl: qcom: Add ipq8074 pinctrl driver Varadarajan Narayanan
2017-06-29 6:18 ` [PATCH v7 2/4] dt-bindings: qcom: Add ipq8074 bindings Varadarajan Narayanan
2017-06-29 6:18 ` [PATCH v7 3/4] arm64: dts: Add ipq8074 SoC and HK01 board support Varadarajan Narayanan
2017-06-30 13:06 ` kbuild test robot
2017-06-29 6:18 ` [PATCH v7 4/4] arm64: defconfig: Enable qcom ipq8074 clock and pinctrl Varadarajan Narayanan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1498717114-338-1-git-send-email-varada@codeaurora.org \
--to=varada@codeaurora.org \
--cc=absahu@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=sjaganat@codeaurora.org \
--cc=sricharan@codeaurora.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).