devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH V3 1/2] dt-bindings: timer: add nxp tpm timer binding doc
       [not found] <1499176823-4421-1-git-send-email-aisheng.dong@nxp.com>
@ 2017-07-04 14:00 ` Dong Aisheng
  0 siblings, 0 replies; only message in thread
From: Dong Aisheng @ 2017-07-04 14:00 UTC (permalink / raw)
  To: linux-kernel
  Cc: linux-arm-kernel, daniel.lezcano, tglx, shawnguo, ping.bai,
	anson.huang, dongas86, kernel, Dong Aisheng, Mark Rutland,
	devicetree

Adding NXP Low Power Timer/Pulse Width Modulation Module (TPM)
binding doc.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Bai Ping <ping.bai@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>

---
ChangeLog:
 v1->v3:
 * No changes
---
 .../devicetree/bindings/timer/nxp,tpm-timer.txt    | 28 ++++++++++++++++++++++
 1 file changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt

diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
new file mode 100644
index 0000000..b4aa7dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
@@ -0,0 +1,28 @@
+NXP Low Power Timer/Pulse Width Modulation Module (TPM)
+
+The Timer/PWM Module (TPM) supports input capture, output compare,
+and the generation of PWM signals to control electric motor and power
+management applications. The counter, compare and capture registers
+are clocked by an asynchronous clock that can remain enabled in low
+power modes. TPM can support global counter bus where one TPM drives
+the counter bus for the others, provided bit width is the same.
+
+Required properties:
+
+- compatible :	should be "fsl,imx7ulp-tpm"
+- reg :		Specifies base physical address and size of the register sets
+		for the clock event device and clock source device.
+- interrupts :	Should be the clock event device interrupt.
+- clocks :	The clocks provided by the SoC to drive the timer, must contain
+		an entry for each entry in clock-names.
+- clock-names : Must include the following entries: "igp" and "per".
+
+Example:
+tpm5: tpm@40260000 {
+	compatible = "fsl,imx7ulp-tpm";
+	reg = <0x40260000 0x1000>;
+	interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
+		 <&clks IMX7ULP_CLK_LPTPM5>;
+	clock-names = "ipg", "per";
+};
-- 
2.7.4

^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2017-07-04 14:00 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <1499176823-4421-1-git-send-email-aisheng.dong@nxp.com>
2017-07-04 14:00 ` [PATCH V3 1/2] dt-bindings: timer: add nxp tpm timer binding doc Dong Aisheng

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).