From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: nicolas.ferre@microchip.com,
alexandre.belloni@free-electrons.com, robh+dt@kernel.org,
mark.rutland@arm.com, linux@armlinux.org.uk, sza@esh.hu
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, cristian.birsan@microchip.com,
ludovic.desroches@microchip.com,
Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [PATCH v3 0/5] Add SoM1 support
Date: Thu, 6 Jul 2017 11:35:24 +0300 [thread overview]
Message-ID: <1499330129-29319-1-git-send-email-claudiu.beznea@microchip.com> (raw)
Hi all,
This series adds support for sama5d2 SoM1 devices.
The at91-sama5d27_som1.dtsi add specific bindings for SoM1 board.
The at91-sama5d27_som1_ek.dts add specific bindings for SoM1 EK board.
Thank you,
Claudiu
Changes in v3:
- remove qspi flash mapping for the moment
- remove at24 and i2c bindings; this will be introduced when
"Add at24 functionality to read form different EEPROM offsets" patch will
be accepted
- change the title of patch 5 from this series from
"ARM: dts: sama5d27_som1_ek: Add sama5d27 SoM1 EK support" to
"ARM: dts: at91: at91-sama5d27_som1_ek: Add sama5d27 SoM1 EK support" to
match the desired prefix
Changes in v2:
o in at91-sama5d27_som1.dtsi:
- increase bootloader and kernel size in flash map (with bootloader
flash offset the dtb and kernel flash offsets were changed)
- use right pin for ethernet-phy interrupt
o in at91-sama5d27_som1_ek.dts:
- removed memory tag and rely on bootloader to fill the right value
- use pin macros (from arch/arm/boot/dts/sama5d2-pinfunc.h) wherever
posible instead of pin numbers
- remove pinctrl_sensor_power and pinctrl_sensor_reset pin muxing
since they are not of intereset for this board
- use "pb4" label for user button instead of "bp1"
Claudiu Beznea (2):
ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support
ARM: dts: sama5d27_som1_ek: Add sama5d27 SoM1 EK support
Cristian Birsan (1):
drivers: soc: atmel: Add basic support for new sama5d2 SiPs
Cyrille Pitchen (1):
ARM: dts: at91: sama5d2: add QSPI nodes
Songjun Wu (1):
ARM: dts: at91: sama5d2: add isc node
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 178 +++++++++
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 551 ++++++++++++++++++++++++++++
arch/arm/boot/dts/sama5d2.dtsi | 38 ++
drivers/soc/atmel/soc.c | 8 +
drivers/soc/atmel/soc.h | 4 +
6 files changed, 780 insertions(+)
create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1.dtsi
create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
--
2.7.4
next reply other threads:[~2017-07-06 8:35 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-06 8:35 Claudiu Beznea [this message]
2017-07-06 8:35 ` [PATCH v3 1/5] ARM: dts: at91: sama5d2: add QSPI nodes Claudiu Beznea
2017-07-06 8:35 ` [PATCH v3 2/5] ARM: dts: at91: sama5d2: add isc node Claudiu Beznea
2017-07-06 8:35 ` [PATCH v3 3/5] drivers: soc: atmel: Add basic support for new sama5d2 SiPs Claudiu Beznea
2017-07-06 8:35 ` [PATCH v3 4/5] ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support Claudiu Beznea
2017-07-06 8:35 ` [PATCH v3 5/5] ARM: dts: at91: at91-sama5d27_som1_ek: Add sama5d27 SoM1 EK support Claudiu Beznea
2017-07-06 12:29 ` [PATCH v3 0/5] Add SoM1 support Nicolas Ferre
[not found] ` <d8ce4321-90eb-06b3-bed4-50bf3885f58d-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org>
2017-07-06 12:38 ` Ludovic Desroches
2017-07-17 9:13 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1499330129-29319-1-git-send-email-claudiu.beznea@microchip.com \
--to=claudiu.beznea@microchip.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=cristian.birsan@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=ludovic.desroches@microchip.com \
--cc=mark.rutland@arm.com \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
--cc=sza@esh.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox