devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eddie James <eajames@linux.vnet.ibm.com>
To: linux-kernel@vger.kernel.org
Cc: linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
	wsa@the-dreams.de, robh+dt@kernel.org,
	gregkh@linuxfoundation.org, jk@ozlabs.org, joel@jms.id.au,
	andrew@aj.id.au, eajames@linux.vnet.ibm.com,
	cbostic@linux.vnet.ibm.com,
	"Edward A. James" <eajames@us.ibm.com>
Subject: [PATCH v2 5/6] drivers/i2c: Add bus recovery for FSI algorithm
Date: Mon, 10 Jul 2017 13:38:01 -0500	[thread overview]
Message-ID: <1499711882-12918-6-git-send-email-eajames@linux.vnet.ibm.com> (raw)
In-Reply-To: <1499711882-12918-1-git-send-email-eajames@linux.vnet.ibm.com>

From: "Edward A. James" <eajames@us.ibm.com>

Bus recovery should reset the engine and force clock the bus 9 times
to recover most situations.

Signed-off-by: Edward A. James <eajames@us.ibm.com>
---
 drivers/i2c/busses/i2c-fsi.c | 75 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 75 insertions(+)

diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
index 1c7fcae..2739535 100644
--- a/drivers/i2c/busses/i2c-fsi.c
+++ b/drivers/i2c/busses/i2c-fsi.c
@@ -468,6 +468,80 @@ static u32 fsi_i2c_functionality(struct i2c_adapter *adap)
 	return I2C_FUNC_I2C | I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_10BIT_ADDR;
 }
 
+static int fsi_i2c_low_level_recover_bus(struct fsi_i2c_master *i2c)
+{
+	int i, rc;
+	u32 mode, dummy = 0;
+
+	rc = fsi_i2c_read_reg(i2c->fsi, I2C_FSI_MODE, &mode);
+	if (rc)
+		return rc;
+
+	mode |= I2C_MODE_DIAG;
+	rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_MODE, &mode);
+	if (rc)
+		return rc;
+
+	for (i = 0; i < 9; ++i) {
+		rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_RESET_SCL, &dummy);
+		if (rc)
+			return rc;
+
+		rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_SET_SCL, &dummy);
+		if (rc)
+			return rc;
+	}
+
+	rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_RESET_SCL, &dummy);
+	if (rc)
+		return rc;
+
+	rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_RESET_SDA, &dummy);
+	if (rc)
+		return rc;
+
+	rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_SET_SCL, &dummy);
+	if (rc)
+		return rc;
+
+	rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_SET_SDA, &dummy);
+	if (rc)
+		return rc;
+
+	mode &= ~I2C_MODE_DIAG;
+	rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_MODE, &mode);
+
+	return rc;
+}
+
+static int fsi_i2c_recover_bus(struct i2c_adapter *adap)
+{
+	int rc;
+	u32 dummy = 0;
+	struct fsi_i2c_port *port = adap->algo_data;
+	struct fsi_i2c_master *i2c = port->master;
+
+	rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_RESET_I2C, &dummy);
+	if (rc)
+		return rc;
+
+	rc = fsi_i2c_dev_init(i2c);
+	if (rc)
+		return rc;
+
+	rc = fsi_i2c_low_level_recover_bus(i2c);
+	if (rc)
+		return rc;
+
+	rc = fsi_i2c_write_reg(i2c->fsi, I2C_FSI_RESET_ERR, &dummy);
+
+	return rc;
+}
+
+static struct i2c_bus_recovery_info fsi_i2c_bus_recovery_info = {
+	.recover_bus = fsi_i2c_recover_bus,
+};
+
 static const struct i2c_algorithm fsi_i2c_algorithm = {
 	.master_xfer = fsi_i2c_xfer,
 	.functionality = fsi_i2c_functionality,
@@ -507,6 +581,7 @@ static int fsi_i2c_probe(struct device *dev)
 		port->adapter.dev.of_node = np;
 		port->adapter.dev.parent = dev;
 		port->adapter.algo = &fsi_i2c_algorithm;
+		port->adapter.bus_recovery_info = &fsi_i2c_bus_recovery_info;
 		port->adapter.algo_data = port;
 
 		snprintf(port->adapter.name, sizeof(port->adapter.name),
-- 
1.8.3.1

  parent reply	other threads:[~2017-07-10 18:38 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-10 18:37 [PATCH v2 0/6] drivers/i2c: Add FSI-attached I2C master algorithm Eddie James
     [not found] ` <1499711882-12918-1-git-send-email-eajames-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>
2017-07-10 18:37   ` [PATCH v2 1/6] " Eddie James
2017-07-10 18:38   ` [PATCH v2 4/6] drivers/i2c: Add I2C master locking to FSI algorithm Eddie James
2017-07-10 18:37 ` [PATCH v2 2/6] drivers/i2c: Add port structure " Eddie James
2017-07-10 18:37 ` [PATCH v2 3/6] drivers/i2c: Add transfer implementation for " Eddie James
2017-07-10 18:38 ` Eddie James [this message]
2017-07-10 18:38 ` [PATCH v2 6/6] dt-bindings: i2c: Add FSI-attached I2C master dt binding documentation Eddie James
2017-07-14 16:05   ` Rob Herring
2017-07-17 14:11 ` [PATCH v2 0/6] drivers/i2c: Add FSI-attached I2C master algorithm Greg KH
2017-07-17 14:16   ` Joel Stanley
2017-07-17 14:20     ` Wolfram Sang
2017-07-17 14:26       ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1499711882-12918-6-git-send-email-eajames@linux.vnet.ibm.com \
    --to=eajames@linux.vnet.ibm.com \
    --cc=andrew@aj.id.au \
    --cc=cbostic@linux.vnet.ibm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=eajames@us.ibm.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jk@ozlabs.org \
    --cc=joel@jms.id.au \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).