devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Simon Horman <horms@verge.net.au>, Magnus Damm <magnus.damm@gmail.com>
Cc: linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v3] arm64: dts: r8a7795: Add all MSIOF nodes
Date: Wed, 12 Jul 2017 12:34:21 +0200	[thread overview]
Message-ID: <1499855661-21386-1-git-send-email-geert+renesas@glider.be> (raw)

Add the device nodes for all MSIOF SPI controllers, incl. clocks, power
domain, dma, and reset properties.

Due to a hardware erratum on R-Car H3 ES1.x, using MSIOF for SPI is only
supported on ES2.0 and later.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Tested on r8a7795/salvator-xs with MSIOF3(A) connected to a HD44780
character LCD through a pair of 74HCT595 shift registers.

v3:
  - Add resets properties,
  - Add family-specific compatible values,
  - Add link to second DMA controller for MSIOF[01],

v2:
  - Rebased,
  - Switch to final CPG/MSSR bindings,
  - Change one-line summary prefix to match current arm-soc practices.
---
 arch/arm64/boot/dts/renesas/r8a7795.dtsi | 62 ++++++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 6f5130766a212d6d..507d8ad07aaf9007 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -899,6 +899,68 @@
 			status = "disabled";
 		};
 
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a7795",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		scif0: serial@e6e60000 {
 			compatible = "renesas,scif-r8a7795",
 				     "renesas,rcar-gen3-scif", "renesas,scif";
-- 
2.7.4

             reply	other threads:[~2017-07-12 10:34 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-12 10:34 Geert Uytterhoeven [this message]
2017-07-13  8:16 ` [PATCH v3] arm64: dts: r8a7795: Add all MSIOF nodes Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1499855661-21386-1-git-send-email-geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=devicetree@vger.kernel.org \
    --cc=horms@verge.net.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).