Re: [PATCH V6 3/4] arm64: dts: qcom: ipq9574: Enable PCIe PHYs and controllers

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 16.07.2024 11:23 AM, Sricharan R wrote:
> From: devi priya <quic_devipriy@quicinc.com>
> 
> Enable the PCIe controller and PHY nodes corresponding to RDP 433.
> 
> Signed-off-by: devi priya <quic_devipriy@quicinc.com>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> ---
>  [V6] No change.
> 
>  arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 113 ++++++++++++++++++++
>  1 file changed, 113 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> index 1bb8d96c9a82..f4b6d540612c 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> @@ -8,6 +8,7 @@
>  
>  /dts-v1/;
>  
> +#include <dt-bindings/gpio/gpio.h>
>  #include "ipq9574-rdp-common.dtsi"
>  
>  / {
> @@ -15,6 +16,45 @@ / {
>  	compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
>  };
>  
> +&pcie1_phy {
> +	status = "okay";
> +};
> +
> +&pcie1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie1_default>;

property-n
property-names

please

Konrad