From mboxrd@z Thu Jan 1 00:00:00 1970 From: Keerthy Subject: [PATCH 0/4] gpio: davinci: Add keystone-k2g support and few clean ups Date: Tue, 18 Jul 2017 16:27:12 +0530 Message-ID: <1500375436-9435-1-git-send-email-j-keerthy@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-kernel-owner@vger.kernel.org To: linus.walleij@linaro.org, ssantosh@kernel.org Cc: robh+dt@kernel.org, nsekhar@ti.com, s-anna@ti.com, fcooper@ti.com, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, j-keerthy@ti.com List-Id: devicetree@vger.kernel.org The patch series adds support for keystone-k2g soc GPIO. Also does a couple of important return handling which were missed earlier in the driver probe. This is based on Suman's: http://marc.info/?l=linux-arm-kernel&m=150034845427555&w=2 http://marc.info/?l=linux-arm-kernel&m=150034856627618&w=2 The driver patches should have no dependency but the device Tree will need the above set. Keerthy (4): gpio: davinci: Use devm_gpiochip_add_data in place of gpiochip_add_data gpio: davinci: Handle the return value of davinci_gpio_irq_setup function gpio: davinci: Add a separate compatible for keystone-k2g soc ARM: dts: keystone-k2g-evm: Add gpio nodes .../devicetree/bindings/gpio/gpio-davinci.txt | 3 +- arch/arm/boot/dts/keystone-k2g.dtsi | 42 ++++++++++++++++++++++ drivers/gpio/gpio-davinci.c | 21 +++++++++-- 3 files changed, 62 insertions(+), 4 deletions(-) -- 1.9.1