From: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
To: Simon Horman <horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>,
Magnus Damm <magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Geert Uytterhoeven
<geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
Subject: [PATCH 1/4] arm64: dts: renesas: Add Renesas R8A77995 SoC support
Date: Thu, 20 Jul 2017 14:54:34 +0200 [thread overview]
Message-ID: <1500555277-22921-2-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1500555277-22921-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
Basic support for the R-Car D3 SoC:
- PSCI,
- CPU,
- Cache controller,
- Main clocks and controller,
- Interrupt controller,
- Timer,
- Watchdog,
- PMU,
- Reset controller,
- Product register,
- System controller,
- UART for console.
Signed-off-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
To avoid dependencies on dt-binding headers going in through different
paths, clock and power domain indices use hardcoded numbers.
---
arch/arm64/boot/dts/renesas/r8a77995.dtsi | 150 ++++++++++++++++++++++++++++++
1 file changed, 150 insertions(+)
create mode 100644 arch/arm64/boot/dts/renesas/r8a77995.dtsi
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
new file mode 100644
index 0000000000000000..7c69b795cd3ebd82
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -0,0 +1,150 @@
+/*
+ * Device Tree Source for the r8a77995 SoC
+ *
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2017 Glider bvba
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "renesas,r8a77995";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ a53_0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0>;
+ device_type = "cpu";
+ power-domains = <&sysc 5>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ };
+
+ L2_CA53: cache-controller-1 {
+ compatible = "cache";
+ power-domains = <&sysc 21>;
+ cache-unified;
+ cache-level = <2>;
+ };
+ };
+
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@f1010000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xf1010000 0 0x1000>,
+ <0x0 0xf1020000 0 0x20000>,
+ <0x0 0xf1040000 0 0x20000>,
+ <0x0 0xf1060000 0 0x20000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&cpg CPG_MOD 408>;
+ clock-names = "clk";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 408>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ rwdt: watchdog@e6020000 {
+ compatible = "renesas,r8a77995-wdt",
+ "renesas,rcar-gen3-wdt";
+ reg = <0 0xe6020000 0 0x0c>;
+ clocks = <&cpg CPG_MOD 402>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 402>;
+ status = "disabled";
+ };
+
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a77995-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>;
+ clock-names = "extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
+ };
+
+ rst: reset-controller@e6160000 {
+ compatible = "renesas,r8a77995-rst";
+ reg = <0 0xe6160000 0 0x0200>;
+ };
+
+ prr: chipid@fff00044 {
+ compatible = "renesas,prr";
+ reg = <0 0xfff00044 0 4>;
+ };
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a77995-sysc";
+ reg = <0 0xe6180000 0 0x0400>;
+ #power-domain-cells = <1>;
+ };
+
+ scif2: serial@e6e88000 {
+ compatible = "renesas,scif-r8a77995",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e88000 0 64>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 310>,
+ <&cpg CPG_CORE 16>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 310>;
+ status = "disabled";
+ };
+ };
+};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-07-20 12:54 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-20 12:54 [PATCH 0/4] arm64: dts: renesas: Add Support for R-Car D3 and Draak Geert Uytterhoeven
[not found] ` <1500555277-22921-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2017-07-20 12:54 ` Geert Uytterhoeven [this message]
2017-07-20 12:54 ` [PATCH 2/4] arm64: dts: renesas: Add Renesas Draak board support Geert Uytterhoeven
2017-07-20 12:54 ` [PATCH 3/4] arm64: dts: renesas: r8a77995: Use r8a7795-sysc binding definitions Geert Uytterhoeven
2017-07-20 12:54 ` [PATCH 4/4] arm64: dts: renesas: r8a77995: Use r8a7795-cpg-mssr " Geert Uytterhoeven
2017-07-20 13:00 ` [PATCH 0/4] arm64: dts: renesas: Add Support for R-Car D3 and Draak Geert Uytterhoeven
2017-07-27 15:16 ` Simon Horman
2017-08-17 9:47 ` Geert Uytterhoeven
2017-08-17 9:51 ` Simon Horman
[not found] ` <20170727151622.GG16143-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>
2017-09-18 9:09 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1500555277-22921-2-git-send-email-geert+renesas@glider.be \
--to=geert+renesas-gxvu3+zwzmszqb+pc5nmwq@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).