From: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>
To: Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Florian Fainelli
<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Gerd Hoffmann <kraxel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>
Subject: [PATCH 3/3] ARM: dts: bcm2835: Add Raspberry Pi Zero W
Date: Thu, 20 Jul 2017 21:37:09 +0200 [thread overview]
Message-ID: <1500579429-9101-4-git-send-email-stefan.wahren@i2se.com> (raw)
In-Reply-To: <1500579429-9101-1-git-send-email-stefan.wahren-eS4NqCHxEME@public.gmane.org>
The Raspberry Pi Zero W has the same components like the Zero plus
a Cypress CYW43438 wireless chip (wifi + bl).
Signed-off-by: Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>
Reviewed-by: Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 73 ++++++++++++++++++++++++++++++++
2 files changed, 75 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index ec60f4f..f3bf9397 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -74,7 +74,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2835-rpi-a-plus.dtb \
bcm2836-rpi-2-b.dtb \
bcm2837-rpi-3-b.dtb \
- bcm2835-rpi-zero.dtb
+ bcm2835-rpi-zero.dtb \
+ bcm2835-rpi-zero-w.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-asus-rt-ac56u.dtb \
bcm4708-asus-rt-ac68u.dtb \
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
new file mode 100644
index 0000000..9c6d714
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2017 Stefan Wahren <stefan.wahren-eS4NqCHxEME@public.gmane.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+ compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
+ model = "Raspberry Pi Zero W";
+
+ aliases {
+ uart0 = "/soc/serial@7e201000";
+ uart1 = "/soc/serial@7e215040";
+ serial0 = "/soc/serial@7e201000";
+ serial1 = "/soc/serial@7e215040";
+ };
+
+ leds {
+ act {
+ gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wl_on>;
+ reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&gpio {
+ pinctrl-0 = <&gpioout &alt0>;
+
+ wl_on: wl-on {
+ brcm,pins = <41>;
+ brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+ };
+};
+
+&hdmi {
+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
+
+&sdhci {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_gpio14>;
+ status = "okay";
+};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-07-20 19:37 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-20 19:37 [PATCH 0/3] ARM: bcm283x: Raspberry Pi Zero W support Stefan Wahren
2017-07-20 19:37 ` [PATCH 1/3] ARM: bcm283x: Define UART pinmuxing on board level Stefan Wahren
[not found] ` <1500579429-9101-1-git-send-email-stefan.wahren-eS4NqCHxEME@public.gmane.org>
2017-07-20 19:37 ` [PATCH 2/3] dt-bindings: bcm: Add Raspberry Pi Zero W Stefan Wahren
[not found] ` <1500579429-9101-3-git-send-email-stefan.wahren-eS4NqCHxEME@public.gmane.org>
2017-07-24 20:18 ` Rob Herring
2017-07-20 19:37 ` Stefan Wahren [this message]
[not found] ` <1500579429-9101-4-git-send-email-stefan.wahren-eS4NqCHxEME@public.gmane.org>
2017-07-26 20:09 ` [PATCH 3/3] ARM: dts: bcm2835: " Eric Anholt
[not found] ` <87vamfx8nx.fsf-omZaPlIz5HhaEpDpdNBo/KxOck334EZe@public.gmane.org>
2017-07-27 11:35 ` Stefan Wahren
[not found] ` <1bc16f65-7872-d554-d29b-d9cd746c28bd-eS4NqCHxEME@public.gmane.org>
2017-07-27 18:41 ` Stefan Wahren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1500579429-9101-4-git-send-email-stefan.wahren@i2se.com \
--to=stefan.wahren-es4nqchxeme@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org \
--cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=kraxel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-rpi-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).