devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rocky Hao <rocky.hao@rock-chips.com>
To: rui.zhang@intel.com, edubezval@gmail.com, heiko@sntech.de,
	robh+dt@kernel.org, mark.rutland@arm.com,
	catalin.marinas@arm.com, will.deacon@arm.com
Cc: shawn.lin@rock-chips.com, cl@rock-chips.com,
	william.wu@rock-chips.com, linux-pm@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, xxx@rock-chips.com,
	jay.xu@rock-chips.com, wxt@rock-chips.com,
	huangtao@rock-chips.com, rocky.hao@rock-chips.com
Subject: [PATCH 4/5] arm64: dts: rockchip: add thermal nodes for rk3328 SoC
Date: Tue, 25 Jul 2017 17:09:47 +0800	[thread overview]
Message-ID: <1500973788-14627-5-git-send-email-rocky.hao@rock-chips.com> (raw)
In-Reply-To: <1500973788-14627-1-git-send-email-rocky.hao@rock-chips.com>

add thermal zone and dynamic CPU power coefficients for rk3328

Change-Id: I227468506c0b978a0fd4dd9596631e026743910e
Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>
---
 arch/arm64/boot/dts/rockchip/rk3328.dtsi | 43 ++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 186fb93fdffd..68829f808320 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -47,6 +47,7 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/power/rk3328-power.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "rockchip,rk3328";
@@ -74,6 +75,8 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x0>;
 			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
@@ -83,6 +86,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x1>;
 			clocks = <&cru ARMCLK>;
+			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
@@ -92,6 +96,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x2>;
 			clocks = <&cru ARMCLK>;
+			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
@@ -101,6 +106,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x3>;
 			clocks = <&cru ARMCLK>;
+			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 		};
@@ -308,6 +314,43 @@
 		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay-passive = <20>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			sustainable-power = <1000>; /* milliwatts */
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				threshold: trip-point0 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				target: trip-point1 {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				soc_crit: soc-crit {
+					temperature = <95000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+			};
+		};
+
+	};
+
 	tsadc: tsadc@ff250000 {
 		compatible = "rockchip,rk3328-tsadc";
 		reg = <0x0 0xff250000 0x0 0x100>;
-- 
1.9.1

  parent reply	other threads:[~2017-07-25  9:09 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-25  9:09 [PATCH 0/5] thermal: rockchip: add tsadc support in thermal driver and IPA thermal control for rk3328 in dts Rocky Hao
2017-07-25  9:09 ` [PATCH 1/5] dt-bindings: rockchip-thermal: Support the RK3328 SoC compatible Rocky Hao
     [not found]   ` <1500973788-14627-2-git-send-email-rocky.hao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-07-27  6:36     ` Heiko Stübner
2017-07-27  6:49       ` rocky.hao
2017-07-25  9:09 ` [PATCH 2/5] thermal: rockchip: Support the RK3328 SOC in thermal driver Rocky Hao
2017-08-11  3:02   ` Zhang Rui
     [not found]     ` <1502420573.2598.7.camel-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
2017-08-11  4:03       ` Caesar Wang
2017-07-25  9:09 ` [PATCH 3/5] arm64: dts: rockchip: add tsadc node for rk3328 SoC Rocky Hao
2017-07-25  9:09 ` Rocky Hao [this message]
2017-07-25  9:16 ` [PATCH 5/5] arm64: dts: rockchip: Enable tsadc module on RK3328 eavluation board Rocky Hao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1500973788-14627-5-git-send-email-rocky.hao@rock-chips.com \
    --to=rocky.hao@rock-chips.com \
    --cc=catalin.marinas@arm.com \
    --cc=cl@rock-chips.com \
    --cc=devicetree@vger.kernel.org \
    --cc=edubezval@gmail.com \
    --cc=heiko@sntech.de \
    --cc=huangtao@rock-chips.com \
    --cc=jay.xu@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=shawn.lin@rock-chips.com \
    --cc=will.deacon@arm.com \
    --cc=william.wu@rock-chips.com \
    --cc=wxt@rock-chips.com \
    --cc=xxx@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).