devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Elaine Zhang <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
To: mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
	sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
	heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org
Cc: linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	xxx-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
	xf-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
	huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
	cl-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
	Elaine Zhang <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Subject: [PATCH v2] clk: rockchip: rk3128: modify rk3128 clk driver to support rk3126
Date: Tue, 25 Jul 2017 17:42:50 +0800	[thread overview]
Message-ID: <1500975770-25046-1-git-send-email-zhangqing@rock-chips.com> (raw)

rk3128 and rk3126 have some gate registers describe differences.
So need to make some distinctions.
The RK3126 and RK3128 Same clock description we move it to
the common clock branches.
And the different clks description use the own clock branches.

Signed-off-by: Elaine Zhang <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
 drivers/clk/rockchip/clk-rk3128.c | 69 +++++++++++++++++++++++++++++++--------
 1 file changed, 55 insertions(+), 14 deletions(-)

diff --git a/drivers/clk/rockchip/clk-rk3128.c b/drivers/clk/rockchip/clk-rk3128.c
index e243f2eae68f..62d7854e4b87 100644
--- a/drivers/clk/rockchip/clk-rk3128.c
+++ b/drivers/clk/rockchip/clk-rk3128.c
@@ -201,7 +201,7 @@ enum rk3128_plls {
 	MUX(SCLK_UART2, "sclk_uart2", mux_uart2_p, CLK_SET_RATE_PARENT,
 			RK2928_CLKSEL_CON(15), 8, 2, MFLAGS);
 
-static struct rockchip_clk_branch rk3128_clk_branches[] __initdata = {
+static struct rockchip_clk_branch common_clk_branches[] __initdata = {
 	/*
 	 * Clock-Architecture Diagram 1
 	 */
@@ -459,10 +459,6 @@ enum rk3128_plls {
 			RK2928_CLKSEL_CON(2), 14, 2, MFLAGS, 8, 5, DFLAGS,
 			RK2928_CLKGATE_CON(10), 15, GFLAGS),
 
-	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_sclk_sfc_src_p, 0,
-			RK2928_CLKSEL_CON(11), 14, 2, MFLAGS, 8, 5, DFLAGS,
-			RK2928_CLKGATE_CON(3), 15, GFLAGS),
-
 	COMPOSITE_NOMUX(PCLK_PMU_PRE, "pclk_pmu_pre", "cpll", 0,
 			RK2928_CLKSEL_CON(29), 8, 6, DFLAGS,
 			RK2928_CLKGATE_CON(1), 0, GFLAGS),
@@ -495,7 +491,6 @@ enum rk3128_plls {
 	GATE(ACLK_DMAC, "aclk_dmac", "aclk_peri", 0, RK2928_CLKGATE_CON(5), 1, GFLAGS),
 	GATE(0, "aclk_peri_niu", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 15, GFLAGS),
 	GATE(0, "aclk_cpu_to_peri", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 2, GFLAGS),
-	GATE(HCLK_GPS, "hclk_gps", "aclk_peri", 0, RK2928_CLKGATE_CON(3), 14, GFLAGS),
 
 	GATE(HCLK_I2S_8CH, "hclk_i2s_8ch", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 4, GFLAGS),
 	GATE(0, "hclk_peri_matrix", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 0, GFLAGS),
@@ -541,7 +536,6 @@ enum rk3128_plls {
 	GATE(0, "hclk_rom", "hclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 6, GFLAGS),
 	GATE(HCLK_CRYPTO, "hclk_crypto", "hclk_cpu", 0, RK2928_CLKGATE_CON(3), 5, GFLAGS),
 
-	GATE(PCLK_HDMI, "pclk_hdmi", "pclk_cpu", 0, RK2928_CLKGATE_CON(3), 8, GFLAGS),
 	GATE(PCLK_ACODEC, "pclk_acodec", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 14, GFLAGS),
 	GATE(0, "pclk_ddrupctl", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 7, GFLAGS),
 	GATE(0, "pclk_grf", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 4, GFLAGS),
@@ -561,6 +555,21 @@ enum rk3128_plls {
 	MMC(SCLK_EMMC_SAMPLE,  "emmc_sample",  "sclk_emmc",  RK3228_EMMC_CON1,  0),
 };
 
+static struct rockchip_clk_branch rk3126_clk_branches[] __initdata = {
+	GATE(0, "pclk_stimer", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 15, GFLAGS),
+	GATE(0, "pclk_s_efuse", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS),
+	GATE(0, "pclk_sgrf", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 8, GFLAGS),
+};
+
+static struct rockchip_clk_branch rk3128_clk_branches[] __initdata = {
+	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_sclk_sfc_src_p, 0,
+			RK2928_CLKSEL_CON(11), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RK2928_CLKGATE_CON(3), 15, GFLAGS),
+
+	GATE(HCLK_GPS, "hclk_gps", "aclk_peri", 0, RK2928_CLKGATE_CON(3), 14, GFLAGS),
+	GATE(PCLK_HDMI, "pclk_hdmi", "pclk_cpu", 0, RK2928_CLKGATE_CON(3), 8, GFLAGS),
+};
+
 static const char *const rk3128_critical_clocks[] __initconst = {
 	"aclk_cpu",
 	"hclk_cpu",
@@ -570,7 +579,7 @@ enum rk3128_plls {
 	"pclk_peri",
 };
 
-static void __init rk3128_clk_init(struct device_node *np)
+static struct rockchip_clk_provider *__init rk3128_common_clk_init(struct device_node *np)
 {
 	struct rockchip_clk_provider *ctx;
 	void __iomem *reg_base;
@@ -578,23 +587,21 @@ static void __init rk3128_clk_init(struct device_node *np)
 	reg_base = of_iomap(np, 0);
 	if (!reg_base) {
 		pr_err("%s: could not map cru region\n", __func__);
-		return;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	ctx = rockchip_clk_init(np, reg_base, CLK_NR_CLKS);
 	if (IS_ERR(ctx)) {
 		pr_err("%s: rockchip clk init failed\n", __func__);
 		iounmap(reg_base);
-		return;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	rockchip_clk_register_plls(ctx, rk3128_pll_clks,
 				   ARRAY_SIZE(rk3128_pll_clks),
 				   RK3128_GRF_SOC_STATUS0);
-	rockchip_clk_register_branches(ctx, rk3128_clk_branches,
-				  ARRAY_SIZE(rk3128_clk_branches));
-	rockchip_clk_protect_critical(rk3128_critical_clocks,
-				      ARRAY_SIZE(rk3128_critical_clocks));
+	rockchip_clk_register_branches(ctx, common_clk_branches,
+				  ARRAY_SIZE(common_clk_branches));
 
 	rockchip_clk_register_armclk(ctx, ARMCLK, "armclk",
 			mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
@@ -606,6 +613,40 @@ static void __init rk3128_clk_init(struct device_node *np)
 
 	rockchip_register_restart_notifier(ctx, RK2928_GLB_SRST_FST, NULL);
 
+	return ctx;
+}
+
+static void __init rk3126_clk_init(struct device_node *np)
+{
+	struct rockchip_clk_provider *ctx;
+
+	ctx = rk3128_common_clk_init(np);
+	if (IS_ERR(ctx))
+		return;
+
+	rockchip_clk_register_branches(ctx, rk3126_clk_branches,
+				       ARRAY_SIZE(rk3126_clk_branches));
+	rockchip_clk_protect_critical(rk3128_critical_clocks,
+				      ARRAY_SIZE(rk3128_critical_clocks));
+
+	rockchip_clk_of_add_provider(np, ctx);
+}
+
+CLK_OF_DECLARE(rk3126_cru, "rockchip,rk3126-cru", rk3126_clk_init);
+
+static void __init rk3128_clk_init(struct device_node *np)
+{
+	struct rockchip_clk_provider *ctx;
+
+	ctx = rk3128_common_clk_init(np);
+	if (IS_ERR(ctx))
+		return;
+
+	rockchip_clk_register_branches(ctx, rk3128_clk_branches,
+				       ARRAY_SIZE(rk3128_clk_branches));
+	rockchip_clk_protect_critical(rk3128_critical_clocks,
+				      ARRAY_SIZE(rk3128_critical_clocks));
+
 	rockchip_clk_of_add_provider(np, ctx);
 }
 
-- 
1.9.1


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

                 reply	other threads:[~2017-07-25  9:42 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1500975770-25046-1-git-send-email-zhangqing@rock-chips.com \
    --to=zhangqing-tnx95d0mmh7dzftrwevzcw@public.gmane.org \
    --cc=cl-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
    --cc=huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=xf-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
    --cc=xxx-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).