devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: horms@verge.net.au, robh+dt@kernel.org, pawel.moll@arm.com,
	mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
	galak@codeaurora.org, devicetree@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org, magnus.damm@gmail.com,
	linux@arm.linux.org.uk, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 08/12] ARM: dts: r8a7792: add [H]SCIF support
Date: Thu, 09 Jun 2016 00:30:32 +0300	[thread overview]
Message-ID: <1501151.qkMbIJd7GW@wasted.cogentembedded.com> (raw)
In-Reply-To: <12536856.AsKMEpuejQ@wasted.cogentembedded.com>

Describe [H]SCIFs in the R8A7792 device tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

---
Changes in version 3:
- refreshed the patch.

Changes in version 2:
- resolved reject, indenting the device nodes that are now under the "soc" node;
- added Geert's tag.

 arch/arm/boot/dts/r8a7792.dtsi |   90 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7792.dtsi
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7792.dtsi
+++ renesas/arch/arm/boot/dts/r8a7792.dtsi
@@ -152,6 +152,96 @@
 			dma-channels = <15>;
 		};
 
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF0>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF1>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e58000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e58000 0 64>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF2>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6ea8000 {
+			compatible = "renesas,scif-r8a7792",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6ea8000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_SCIF3>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+			       <&dmac1 0x2f>, <&dmac1 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7792",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_HSCIF0>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7792",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp7_clks R8A7792_CLK_HSCIF1>, <&zs_clk>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+			status = "disabled";
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7792-cpg-clocks",

  parent reply	other threads:[~2016-06-08 21:30 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-08 21:01 [PATCH v3 00/12] Add R8A7792/Blanche board support Sergei Shtylyov
2016-06-08 21:04 ` [PATCH v3 01/12] ARM: shmobile: r8a7792: add clock index macros Sergei Shtylyov
     [not found]   ` <2256036.Aah0Fxjv7E-gHKXc3Y1Z8zGSmamagVegGFoWSdPRAKMAL8bYrjMMd8@public.gmane.org>
2016-06-09  9:47     ` Geert Uytterhoeven
2016-06-08 21:07 ` [PATCH v3 02/12] ARM: shmobile: r8a7792: add power domain " Sergei Shtylyov
2016-06-08 21:17 ` [PATCH v3 06/12] ARM: dts: r8a7792: initial SoC device tree Sergei Shtylyov
2016-06-09 10:05   ` Geert Uytterhoeven
2016-06-09 20:36     ` Sergei Shtylyov
2016-06-08 21:28 ` [PATCH v3 07/12] ARM: dts: r8a7792: add SYS-DMAC support Sergei Shtylyov
2016-06-08 21:30 ` Sergei Shtylyov [this message]
2016-06-08 21:31 ` [PATCH v3 09/12] ARM: dts: r8a7792: add IRQC support Sergei Shtylyov
2016-06-08 21:33 ` [PATCH v3 10/12] DT: arm: shmobile: document Blanche board Sergei Shtylyov
2016-06-08 21:35 ` [PATCH v3 11/12] ARM: dts: blanche: initial device tree Sergei Shtylyov
2016-06-08 21:36 ` [PATCH v3 12/12] ARM: dts: blanche: add Ethernet support Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1501151.qkMbIJd7GW@wasted.cogentembedded.com \
    --to=sergei.shtylyov@cogentembedded.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=horms@verge.net.au \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=magnus.damm@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).