From mboxrd@z Thu Jan 1 00:00:00 1970 From: yegorslists-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org Subject: [PATCH 3/3] tty/serial/8250: add DT bindings description for mctrl_gpio helpers Date: Thu, 27 Jul 2017 15:17:36 +0200 Message-ID: <1501161456-13367-4-git-send-email-yegorslists@googlemail.com> References: <1501161456-13367-1-git-send-email-yegorslists@googlemail.com> Return-path: In-Reply-To: <1501161456-13367-1-git-send-email-yegorslists-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org, andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org, jslaby-IBi9RG/b67k@public.gmane.org, tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org, robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mika.westerberg-VuQAYsv1563Yd54FQh9/CA@public.gmane.org, uwe-rXY34ruvC2xidJT2blvkqNi2O/JbrIOy@public.gmane.org, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Yegor Yefremov List-Id: devicetree@vger.kernel.org From: Yegor Yefremov Describe {rts,cts,dtr,dsr,rng,dcd}-gpios usage. Cc: Andy Shevchenko Signed-off-by: Yegor Yefremov --- Documentation/devicetree/bindings/serial/8250.txt | 26 +++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt index 419ff6c..1c09db2 100644 --- a/Documentation/devicetree/bindings/serial/8250.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -48,6 +48,16 @@ Optional properties: - tx-threshold: Specify the TX FIFO low water indication for parts with programmable TX FIFO thresholds. - resets : phandle + reset specifier pairs +- rts-gpios: +- cts-gpios: +- dtr-gpios: +- dsr-gpios: +- rng-gpios: +- dcd-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD + line respectively. It will use specified GPIO instead of the peripheral + function pin for the UART feature. If unsure, don't specify this property. + If "wakeup-source" property is specified for the device this GPIO + initialization will be aborted. Note: * fsl,ns16550: @@ -69,3 +79,19 @@ Example: interrupts = <10>; reg-shift = <2>; }; + +Example for OMAP UART using GPIO-based modem control signals: + + uart4: serial@49042000 { + compatible = "ti,omap3-uart"; + reg = <0x49042000 0x400>; + interrupts = <80>; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html