From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sean Wang Subject: Re: [PATCH v4 9/9] arm: dts: mt7623: add dts file for Bananapi R2 (BPI-R2) board Date: Mon, 31 Jul 2017 10:46:22 +0800 Message-ID: <1501469182.10930.3.camel@mtkswgap22> References: <5cc5489b38fc2723c30c8cfe0d4353f967d100f3.1495683769.git.sean.wang@mediatek.com> <805ad5c4-db47-ef10-565d-b63e33a84bdf@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <805ad5c4-db47-ef10-565d-b63e33a84bdf-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Matthias Brugger Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: devicetree@vger.kernel.org On Thu, 2017-07-27 at 16:39 +0200, Matthias Brugger wrote: > > On 05/25/2017 06:02 AM, sean.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org wrote: > > From: Sean Wang > > > > Add support for the Bananapi R2 (BPI-R2) development board from > > BIPAI KEJI. Detailed hardware information for BPI-R2 which could be > > found on http://www.banana-pi.org/r2.html > > > > The patch currently only adds Mediatek GMAC, MT7530 Switch, the crypto > > engine, USB, IR, I2S, I2C, UART, SPI, PWM, GPIO keys, GPIO LEDs and > > PMIC LEDs. As to the other missing hardware and peripherals, they would > > be added and integrated continuously. > > > > Signed-off-by: Sean Wang > > Acked-by: Rob Herring > > --- > > Documentation/devicetree/bindings/arm/mediatek.txt | 2 + > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 440 +++++++++++++++++++++ > > 3 files changed, 443 insertions(+) > > create mode 100644 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts > > > [...] > > diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts > > new file mode 100644 > > index 0000000..72c7984 > > --- /dev/null > > +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts > [...] > > + > > +ð { > > + status = "okay"; > > + gmac0: mac@0 { > > + compatible = "mediatek,eth-mac"; > > + reg = <0>; > > + phy-mode = "trgmii"; > > + fixed-link { > > + speed = <1000>; > > + full-duplex; > > + pause; > > + }; > > + }; > > + > > + mdio: mdio-bus { > > + switch@0 { > > + compatible = "mediatek,mt7530"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <0>; > > What is this reg needed for? I can't find it neither in the code nor in the > bindings (mt7530 and general dsa bindings). Actually it throws a warning when > compiling: > arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dtb: Warning (reg_format): "reg" > property in /ethernet@1b100000/mdio-bus/switch@0 has invalid length (4 bytes) > (#address-cells == 2, #size-cells == 1) > arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dtb: Warning > (avoid_default_addr_size): Relying on default #address-cells value for > /ethernet@1b100000/mdio-bus/switch@0 > arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dtb: Warning > (avoid_default_addr_size): Relying on default #size-cells value for > /ethernet@1b100000/mdio-bus/switch@0 > > Regards, > Matthias > Hi, Matthias many thanks It should be just my written mistakes. Recently I prepared the next version including a few fixups and enhancements which also would include the warning correction you reported here. Sean > _______________________________________________ > Linux-mediatek mailing list > Linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org > http://lists.infradead.org/mailman/listinfo/linux-mediatek -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html