From mboxrd@z Thu Jan 1 00:00:00 1970 From: Varadarajan Narayanan Subject: [PATCH v6 1/7] dt-bindings: phy: qmp: Add output-clock-names Date: Mon, 31 Jul 2017 12:04:11 +0530 Message-ID: <1501482857-14100-2-git-send-email-varada@codeaurora.org> References: <1501482857-14100-1-git-send-email-varada@codeaurora.org> Return-path: In-Reply-To: <1501482857-14100-1-git-send-email-varada-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, svarbanov-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org, kishon-l0cyMroinI0@public.gmane.org, sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, vivek.gautam-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, fengguang.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org, weiyongjun1-hv44wF8Li93QT0dZR+AlfA@public.gmane.org, linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Varadarajan Narayanan List-Id: devicetree@vger.kernel.org The phy outputs a clock that will act as the parent for the phy's pipe clock. Add the name of this clock to the lane's DT node. Acked-by: Rob Herring Signed-off-by: Varadarajan Narayanan --- Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt index e11c563..5d7a51f 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -60,6 +60,8 @@ Required properties for child node: one for each entry in clock-names. - clock-names: Must contain following for pcie and usb qmp phys: "pipe" for pipe clock specific to each lane. + - clock-output-names: Name of the phy clock that will be the parent for + the above pipe clock. - resets: a list of phandles and reset controller specifier pairs, one for each entry in reset-names. @@ -96,6 +98,7 @@ Example: clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "pipe0"; + clock-output-names = "pcie_0_pipe_clk_src"; resets = <&gcc GCC_PCIE_0_PHY_BCR>; reset-names = "lane0"; }; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html