From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vivek Gautam Subject: [PATCH 1/4] arm64: dts: msm8996: Add device node for qcom qusb2 phy Date: Mon, 31 Jul 2017 12:14:41 +0530 Message-ID: <1501483484-2207-2-git-send-email-vivek.gautam@codeaurora.org> References: <1501483484-2207-1-git-send-email-vivek.gautam@codeaurora.org> Return-path: In-Reply-To: <1501483484-2207-1-git-send-email-vivek.gautam@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org To: andy.gross@linaro.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org Cc: bjorn.andersson@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com, sboyd@codeaurora.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Vivek Gautam List-Id: devicetree@vger.kernel.org Adding device node for QUSB2 phy and the required infrastructure to enable support for the same. This phy is used by dwc3 controller present on msm8996. Signed-off-by: Vivek Gautam --- arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 8 +++++ arch/arm64/boot/dts/qcom/msm8996.dtsi | 51 ++++++++++++++++++++++++++++ 2 files changed, 59 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 5366708ee78f..4476e9238150 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -88,6 +88,14 @@ cd-gpios = <&msmgpio 38 0x1>; status = "okay"; }; + + phy@7411000 { + status = "okay"; + }; + + phy@7412000 { + status = "okay"; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index d6a30fe81b77..019ec9345dbc 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -621,6 +621,57 @@ <960000000>, <825000000>; }; + + qfprom@74000 { + compatible = "qcom,qfprom"; + reg = <0x74000 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2p_hstx_trim: hstx_trim@24e { + reg = <0x24e 0x2>; + bits = <5 4>; + }; + + qusb2s_hstx_trim: hstx_trim@24f { + reg = <0x24f 0x1>; + bits = <1 4>; + }; + }; + + hsusb_phy1: phy@7411000 { + compatible = "qcom,msm8996-qusb2-phy"; + reg = <0x7411000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX1_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + vdda-pll-supply = <&pm8994_l12>; + vdda-phy-dpdm-supply = <&pm8994_l24>; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2p_hstx_trim>; + status = "disabled"; + }; + + hsusb_phy2: phy@7412000 { + compatible = "qcom,msm8996-qusb2-phy"; + reg = <0x7412000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX2_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + vdda-pll-supply = <&pm8994_l12>; + vdda-phy-dpdm-supply = <&pm8994_l24>; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + nvmem-cells = <&qusb2s_hstx_trim>; + status = "disabled"; + }; }; adsp-pil { -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project