From mboxrd@z Thu Jan 1 00:00:00 1970 From: Anup Patel Subject: [PATCH v3 0/5] FlexRM driver improvements Date: Tue, 1 Aug 2017 16:05:49 +0530 Message-ID: <1501583754-31969-1-git-send-email-anup.patel@broadcom.com> Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Rob Herring , Mark Rutland , Catalin Marinas , Will Deacon , Jassi Brar Cc: Florian Fainelli , Scott Branden , Ray Jui , linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org, Anup Patel List-Id: devicetree@vger.kernel.org This patchset does various improvments to Broadcom FlexRM mailbox controller driver and also adds FlexRM DT nodes for Stingray SOC. The patches are based on Linux-4.13-rc3 and can also be found at flexrm-imp-v3 branch of https://github.com/Broadcom/arm64-linux.git Changes since v2: - Dropped PATCH5 and PATCH6 - Added a PATCH to use txdone_ack instead of txdone_poll - Dropped PATCH7 because it is now part of http://www.mail-archive.com/linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org/msg1456425.html Changes since v1: - Add one more patch to use bitmap instead of IDA in FlexRM driver Anup Patel (5): mailbox: bcm-flexrm-mailbox: Set IRQ affinity hint for FlexRM ring IRQs mailbox: bcm-flexrm-mailbox: Add debugfs support mailbox: bcm-flexrm-mailbox: Fix mask used in CMPL_START_ADDR_VALUE() mailbox: bcm-flexrm-mailbox: Use bitmap instead of IDA mailbox: bcm-flexrm-mailbox: Use txdone_ack instead of txdone_poll drivers/mailbox/bcm-flexrm-mailbox.c | 252 ++++++++++++++++++++++++----------- 1 file changed, 175 insertions(+), 77 deletions(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html