From: David Lechner <david@lechnology.com>
To: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>,
David Lechner <david@lechnology.com>,
Kevin Hilman <khilman@kernel.org>, Sekhar Nori <nsekhar@ti.com>,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 2/6] drm/tinydrm: generalize tinydrm_xrgb8888_to_gray8()
Date: Thu, 3 Aug 2017 17:33:46 -0500 [thread overview]
Message-ID: <1501799630-1650-3-git-send-email-david@lechnology.com> (raw)
In-Reply-To: <1501799630-1650-1-git-send-email-david@lechnology.com>
This adds parameters for vaddr and clip to tinydrm_xrgb8888_to_gray8() to
make it more generic.
dma_buf_{begin,end}_cpu_access() are moved out to the repaper driver.
Signed-off-by: David Lechner <david@lechnology.com>
---
drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c | 35 ++++++++++----------------
drivers/gpu/drm/tinydrm/repaper.c | 21 +++++++++++++++-
include/drm/tinydrm/tinydrm-helpers.h | 3 ++-
3 files changed, 35 insertions(+), 24 deletions(-)
diff --git a/drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c b/drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c
index 75808bb..5915ba8 100644
--- a/drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c
+++ b/drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c
@@ -185,7 +185,9 @@ EXPORT_SYMBOL(tinydrm_xrgb8888_to_rgb565);
/**
* tinydrm_xrgb8888_to_gray8 - Convert XRGB8888 to grayscale
* @dst: 8-bit grayscale destination buffer
+ * @vaddr: XRGB8888 source buffer
* @fb: DRM framebuffer
+ * @clip: Clip rectangle area to copy
*
* Drm doesn't have native monochrome or grayscale support.
* Such drivers can announce the commonly supported XR24 format to userspace
@@ -199,12 +201,11 @@ EXPORT_SYMBOL(tinydrm_xrgb8888_to_rgb565);
* Returns:
* Zero on success, negative error code on failure.
*/
-int tinydrm_xrgb8888_to_gray8(u8 *dst, struct drm_framebuffer *fb)
+int tinydrm_xrgb8888_to_gray8(u8 *dst, void *vaddr, struct drm_framebuffer *fb,
+ struct drm_clip_rect *clip)
{
- struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
- struct dma_buf_attachment *import_attach = cma_obj->base.import_attach;
- unsigned int x, y, pitch = fb->pitches[0];
- int ret = 0;
+ unsigned int len = (clip->x2 - clip->x1) * sizeof(u32);
+ unsigned int x, y;
void *buf;
u32 *src;
@@ -214,22 +215,16 @@ int tinydrm_xrgb8888_to_gray8(u8 *dst, struct drm_framebuffer *fb)
* The cma memory is write-combined so reads are uncached.
* Speed up by fetching one line at a time.
*/
- buf = kmalloc(pitch, GFP_KERNEL);
+ buf = kmalloc(len, GFP_KERNEL);
if (!buf)
return -ENOMEM;
- if (import_attach) {
- ret = dma_buf_begin_cpu_access(import_attach->dmabuf,
- DMA_FROM_DEVICE);
- if (ret)
- goto err_free;
- }
-
- for (y = 0; y < fb->height; y++) {
- src = cma_obj->vaddr + (y * pitch);
- memcpy(buf, src, pitch);
+ for (y = clip->y1; y < clip->y2; y++) {
+ src = vaddr + (y * fb->pitches[0]);
+ src += clip->x1;
+ memcpy(buf, src, len);
src = buf;
- for (x = 0; x < fb->width; x++) {
+ for (x = clip->x1; x < clip->x2; x++) {
u8 r = (*src & 0x00ff0000) >> 16;
u8 g = (*src & 0x0000ff00) >> 8;
u8 b = *src & 0x000000ff;
@@ -240,13 +235,9 @@ int tinydrm_xrgb8888_to_gray8(u8 *dst, struct drm_framebuffer *fb)
}
}
- if (import_attach)
- ret = dma_buf_end_cpu_access(import_attach->dmabuf,
- DMA_FROM_DEVICE);
-err_free:
kfree(buf);
- return ret;
+ return 0;
}
EXPORT_SYMBOL(tinydrm_xrgb8888_to_gray8);
diff --git a/drivers/gpu/drm/tinydrm/repaper.c b/drivers/gpu/drm/tinydrm/repaper.c
index 3343d3f..d34cd9b 100644
--- a/drivers/gpu/drm/tinydrm/repaper.c
+++ b/drivers/gpu/drm/tinydrm/repaper.c
@@ -18,6 +18,7 @@
*/
#include <linux/delay.h>
+#include <linux/dma-buf.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of_device.h>
@@ -525,11 +526,20 @@ static int repaper_fb_dirty(struct drm_framebuffer *fb,
struct drm_clip_rect *clips,
unsigned int num_clips)
{
+ struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0);
+ struct dma_buf_attachment *import_attach = cma_obj->base.import_attach;
struct tinydrm_device *tdev = fb->dev->dev_private;
struct repaper_epd *epd = epd_from_tinydrm(tdev);
+ struct drm_clip_rect clip;
u8 *buf = NULL;
int ret = 0;
+ /* repaper can't do partial updates */
+ clip.x1 = 0;
+ clip.x2 = fb->width;
+ clip.y1 = 0;
+ clip.y2 = fb->height;
+
mutex_lock(&tdev->dirty_lock);
if (!epd->enabled)
@@ -550,7 +560,16 @@ static int repaper_fb_dirty(struct drm_framebuffer *fb,
goto out_unlock;
}
- ret = tinydrm_xrgb8888_to_gray8(buf, fb);
+ if (import_attach) {
+ ret = dma_buf_begin_cpu_access(import_attach->dmabuf,
+ DMA_FROM_DEVICE);
+ if (ret)
+ goto out_unlock;
+ }
+
+ ret = tinydrm_xrgb8888_to_gray8(buf, cma_obj->vaddr, fb, &clip);
+ if (import_attach)
+ dma_buf_end_cpu_access(import_attach->dmabuf, DMA_FROM_DEVICE);
if (ret)
goto out_unlock;
diff --git a/include/drm/tinydrm/tinydrm-helpers.h b/include/drm/tinydrm/tinydrm-helpers.h
index a6c387f..9e13ef5 100644
--- a/include/drm/tinydrm/tinydrm-helpers.h
+++ b/include/drm/tinydrm/tinydrm-helpers.h
@@ -43,7 +43,8 @@ void tinydrm_swab16(u16 *dst, void *vaddr, struct drm_framebuffer *fb,
void tinydrm_xrgb8888_to_rgb565(u16 *dst, void *vaddr,
struct drm_framebuffer *fb,
struct drm_clip_rect *clip, bool swap);
-int tinydrm_xrgb8888_to_gray8(u8 *dst, struct drm_framebuffer *fb);
+int tinydrm_xrgb8888_to_gray8(u8 *dst, void *vaddr, struct drm_framebuffer *fb,
+ struct drm_clip_rect *clip);
struct backlight_device *tinydrm_of_find_backlight(struct device *dev);
int tinydrm_enable_backlight(struct backlight_device *backlight);
--
2.7.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-08-03 22:33 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-03 22:33 [PATCH v3 0/6] Support for LEGO MINDSTORMS EV3 LCD display David Lechner
2017-08-03 22:33 ` [PATCH v3 1/6] drm/tinydrm: remove call to mipi_dbi_init() from mipi_dbi_spi_init() David Lechner
2017-08-04 13:16 ` Noralf Trønnes
2017-08-03 22:33 ` David Lechner [this message]
2017-08-04 7:27 ` [PATCH v3 2/6] drm/tinydrm: generalize tinydrm_xrgb8888_to_gray8() Noralf Trønnes
2017-08-04 13:20 ` Noralf Trønnes
2017-08-03 22:33 ` [PATCH v3 3/6] dt-bindings: add binding for Sitronix ST7586 display panels David Lechner
2017-08-04 9:48 ` Noralf Trønnes
2017-08-04 16:51 ` David Lechner
2017-08-04 18:04 ` Noralf Trønnes
[not found] ` <1501799630-1650-4-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org>
2017-08-04 14:54 ` Laurent Pinchart
2017-08-04 15:51 ` David Lechner
2017-08-04 19:39 ` Laurent Pinchart
2017-08-05 16:13 ` David Lechner
2017-08-04 17:36 ` Noralf Trønnes
2017-08-03 22:33 ` [PATCH v3 4/6] drm/tinydrm: add support for LEGO MINDSTORMS EV3 LCD David Lechner
2017-08-05 18:19 ` Noralf Trønnes
[not found] ` <d814508b-1225-b385-6a90-091487bee2b5-L59+Z2yzLopAfugRpC6u6w@public.gmane.org>
2017-08-05 19:54 ` Noralf Trønnes
2017-08-07 16:03 ` David Lechner
2017-08-03 22:33 ` [PATCH v3 5/6] ARM: dts: da850-lego-ev3: Add node for LCD display David Lechner
2017-08-03 22:33 ` [PATCH v3 6/6] ARM: davinci_all_defconfig: enable tinydrm and ST7586 David Lechner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1501799630-1650-3-git-send-email-david@lechnology.com \
--to=david@lechnology.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).