devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: William Wu <william.wu@rock-chips.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
	frank.wang@rock-chips.com, huangtao@rock-chips.com,
	daniel.meng@rock-chips.com, william.wu@rock-chips.com
Subject: [PATCH 1/2] arm64: dts: rockchip: add usb3 controller node for RK3328 SoCs
Date: Thu, 17 Aug 2017 15:35:41 +0800	[thread overview]
Message-ID: <1502955342-21985-2-git-send-email-william.wu@rock-chips.com> (raw)
In-Reply-To: <1502955342-21985-1-git-send-email-william.wu@rock-chips.com>

RK3328 has one USB 3.0 OTG controller which uses DWC_USB3
core's general architecture. It can act as static xHCI host
controller, static device controller, USB 3.0/2.0 OTG basing
on ID of USB3.0 PHY.

Signed-off-by: William Wu <william.wu@rock-chips.com>
---
 .../devicetree/bindings/usb/rockchip,dwc3.txt      |  4 +++-
 arch/arm64/boot/dts/rockchip/rk3328.dtsi           | 27 ++++++++++++++++++++++
 2 files changed, 30 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
index 0536a93..d6b2e47 100644
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
@@ -1,7 +1,9 @@
 Rockchip SuperSpeed DWC3 USB SoC controller
 
 Required properties:
-- compatible:	should contain "rockchip,rk3399-dwc3" for rk3399 SoC
+- compatible:	should be one of the following:
+  - "rockchip,rk3399-dwc3": for rk3399 SoC
+  - "rockchip,rk3328-dwc3", "rockchip,rk3399-dwc3": for rk3328 SoC
 - clocks:	A list of phandle + clock-specifier pairs for the
 		clocks listed in clock-names
 - clock-names:	Should contain the following:
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index e6da0ce..4b4953b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -655,6 +655,33 @@
 		status = "disabled";
 	};
 
+	usbdrd3: usb@ff600000 {
+		compatible = "rockchip,rk3328-dwc3", "rockchip,rk3399-dwc3";
+		clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>,
+			 <&cru ACLK_USB3OTG>;
+		clock-names = "ref_clk", "suspend_clk",
+			      "bus_clk";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		usbdrd_dwc3: dwc3@ff600000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0xff600000 0x0 0x100000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "otg";
+			phy_type = "utmi_wide";
+			snps,dis_enblslpm_quirk;
+			snps,dis-u2-freeclk-exists-quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_u3_susphy_quirk;
+			snps,dis-del-phy-power-chg-quirk;
+			snps,tx-ipgap-linecheck-dis-quirk;
+			status = "disabled";
+		};
+	};
+
 	gic: interrupt-controller@ff811000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
-- 
2.0.0

  reply	other threads:[~2017-08-17  7:35 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-17  7:35 [PATCH 0/2] Add usb3 ctrl node on RK3328 SoCs and enable usb3 host on RK3328 evb William Wu
2017-08-17  7:35 ` William Wu [this message]
2017-08-17  7:35 ` [PATCH 2/2] arm64: dts: rockchip: enable usb3 for RK3328 evaluation board William Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1502955342-21985-2-git-send-email-william.wu@rock-chips.com \
    --to=william.wu@rock-chips.com \
    --cc=daniel.meng@rock-chips.com \
    --cc=devicetree@vger.kernel.org \
    --cc=frank.wang@rock-chips.com \
    --cc=heiko@sntech.de \
    --cc=huangtao@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).