[PATCH v9 0/3] Add support for IPQ8074 PCIe phy and controller

[PATCH v9 0/3] Add support for IPQ8074 PCIe phy and controller

[Varadarajan Narayanan]

v9:
  Incorporate Stanimir's feedback for
	PCI: dwc: qcom: Add support for IPQ8074 PCIe controller

  Add Stanimir's Ack for
	PCI: dwc: qcom: Use block IP version for operations
	PCI: dwc: qcom: Add support for IPQ8074 PCIe controller

  Add Rob's Ack for
	dt-bindings: pci: qcom: Add support for IPQ8074

v8:
  Incorporate Stanimir's feedback for
	PCI: dwc: qcom: Add support for IPQ8074 PCIe controller

v7:
  Skip PHY patches as they are already included by Kishon

  Incorporate Stanimir's feedback for the below patches
	PCI: dwc: qcom: Use block IP version for operations
	PCI: dwc: qcom: Add support for IPQ8074 PCIe controller

v6:
  Added 'Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>' and fixed
  white space issues as mentioned by Vivek.
	phy: qcom-qmp: Fix phy pipe clock name
	dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074

v5:
  dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
        Renamed phy_phy clock as common clock

  phy: qcom-qmp: Fix phy pipe clock name
        Moved the DT get into the registering function

  phy: qcom-qmp: Add support for IPQ8074
        Place the IPQ8074 related structs similar to existing SoC.
        Renamed phy_phy clock as common clock
v4:
  phy: qcom-qmp: Fix phy pipe clock name
	Based on Vivek's comments, return failure only for
	PCI/USB type of phys.
	Removed Ack.

  phy: qcom-qmp: Handle unavailable registers
	Removed this patch.
	Incorrectly used a block of code that is not applicable
	to IPQ8074, hence had to avoid an "unavailable" register.
	Since that is addressed using 'has_phy_com_ctrl' this
	patch is not needed.

  phy: qcom-qmp: Add support for IPQ8074
	Set 'has_phy_com_ctrl' to false
	Remove ipq8074_pciephy_regs_layout

v3:
  PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
	Incoporate Stan's feedback:-
	 - Add SoC Wrapper and Synopsys Core IP versions

v2:
  dt-bindings: phy: qmp: Add output-clock-names
	Added Rob H's Ack

  dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
	Removed example
	Added IPQ8074 specific details

  phy: qcom-qmp: Fix phy pipe clock name
	Added Vivek's Ack

  phy: qcom-qmp: Handle unavailable registers
	No changes

  phy: qcom-qmp: Add support for IPQ8074
	No changes

  PCI: dwc: qcom: Use block IP version for operations
	Added new patch to use block IP version instead of v1, v2...

  dt-bindings: pci: qcom: Add support for IPQ8074
	Removed example
	Added IPQ8074 specific details

  PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
	Incorporated Bjorn's feedback:-
	 - Removed reset names, helper function to assert/deassert, helper
	   function to R/M/W register.
	 - Renamed sys_noc clock as iface clock
	 - Added deinit if phy power on fails

v1:
Add definitions required to enable QMP phy support for IPQ8074.

Add support for the IPQ8074 PCIe controller.  IPQ8074 supports
Gen 1/2, one lane, two PCIe root complex with support for MSI and
legacy interrupts, and it conforms to PCI Express Base 2.1
specification.

Varadarajan Narayanan (3):
  PCI: dwc: qcom: Use block IP version for operations
  dt-bindings: pci: qcom: Add support for IPQ8074
  PCI: dwc: qcom: Add support for IPQ8074 PCIe controller

 .../devicetree/bindings/pci/qcom,pcie.txt          |  23 ++
 drivers/pci/dwc/pcie-qcom.c                        | 346 +++++++++++++++++----
 2 files changed, 302 insertions(+), 67 deletions(-)

-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[PATCH v9 1/3] PCI: dwc: qcom: Use block IP version for operations

[Varadarajan Narayanan]

Presently, when support for a new SoC is added, the driver ops
structures and functions are versioned with plain 1, 2, 3 etc.
Instead use the block IP version number.

Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 drivers/pci/dwc/pcie-qcom.c | 138 +++++++++++++++++++++++---------------------
 1 file changed, 71 insertions(+), 67 deletions(-)

diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c
index 871e7d9..4ec5cd9 100644
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
@@ -61,7 +61,7 @@
 
 #define PERST_DELAY_US				1000
 
-struct qcom_pcie_resources_v0 {
+struct qcom_pcie_resources_2_1_0 {
 	struct clk *iface_clk;
 	struct clk *core_clk;
 	struct clk *phy_clk;
@@ -75,7 +75,7 @@ struct qcom_pcie_resources_v0 {
 	struct regulator *vdda_refclk;
 };
 
-struct qcom_pcie_resources_v1 {
+struct qcom_pcie_resources_1_0_0 {
 	struct clk *iface;
 	struct clk *aux;
 	struct clk *master_bus;
@@ -84,7 +84,7 @@ struct qcom_pcie_resources_v1 {
 	struct regulator *vdda;
 };
 
-struct qcom_pcie_resources_v2 {
+struct qcom_pcie_resources_2_3_2 {
 	struct clk *aux_clk;
 	struct clk *master_clk;
 	struct clk *slave_clk;
@@ -92,7 +92,7 @@ struct qcom_pcie_resources_v2 {
 	struct clk *pipe_clk;
 };
 
-struct qcom_pcie_resources_v3 {
+struct qcom_pcie_resources_2_4_0 {
 	struct clk *aux_clk;
 	struct clk *master_clk;
 	struct clk *slave_clk;
@@ -111,10 +111,10 @@ struct qcom_pcie_resources_v3 {
 };
 
 union qcom_pcie_resources {
-	struct qcom_pcie_resources_v0 v0;
-	struct qcom_pcie_resources_v1 v1;
-	struct qcom_pcie_resources_v2 v2;
-	struct qcom_pcie_resources_v3 v3;
+	struct qcom_pcie_resources_1_0_0 v1_0_0;
+	struct qcom_pcie_resources_2_1_0 v2_1_0;
+	struct qcom_pcie_resources_2_3_2 v2_3_2;
+	struct qcom_pcie_resources_2_4_0 v2_4_0;
 };
 
 struct qcom_pcie;
@@ -173,7 +173,7 @@ static int qcom_pcie_establish_link(struct qcom_pcie *pcie)
 	return dw_pcie_wait_for_link(pci);
 }
 
-static void qcom_pcie_v0_v1_ltssm_enable(struct qcom_pcie *pcie)
+static void qcom_pcie_2_1_0_ltssm_enable(struct qcom_pcie *pcie)
 {
 	u32 val;
 
@@ -183,9 +183,9 @@ static void qcom_pcie_v0_v1_ltssm_enable(struct qcom_pcie *pcie)
 	writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL);
 }
 
-static int qcom_pcie_get_resources_v0(struct qcom_pcie *pcie)
+static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
 
@@ -233,9 +233,9 @@ static int qcom_pcie_get_resources_v0(struct qcom_pcie *pcie)
 	return PTR_ERR_OR_ZERO(res->phy_reset);
 }
 
-static void qcom_pcie_deinit_v0(struct qcom_pcie *pcie)
+static void qcom_pcie_deinit_2_1_0(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
 
 	reset_control_assert(res->pci_reset);
 	reset_control_assert(res->axi_reset);
@@ -250,9 +250,9 @@ static void qcom_pcie_deinit_v0(struct qcom_pcie *pcie)
 	regulator_disable(res->vdda_refclk);
 }
 
-static int qcom_pcie_init_v0(struct qcom_pcie *pcie)
+static int qcom_pcie_init_2_1_0(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+	struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
 	u32 val;
@@ -368,9 +368,9 @@ static int qcom_pcie_init_v0(struct qcom_pcie *pcie)
 	return ret;
 }
 
-static int qcom_pcie_get_resources_v1(struct qcom_pcie *pcie)
+static int qcom_pcie_get_resources_1_0_0(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
+	struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
 
@@ -398,9 +398,9 @@ static int qcom_pcie_get_resources_v1(struct qcom_pcie *pcie)
 	return PTR_ERR_OR_ZERO(res->core);
 }
 
-static void qcom_pcie_deinit_v1(struct qcom_pcie *pcie)
+static void qcom_pcie_deinit_1_0_0(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
+	struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0;
 
 	reset_control_assert(res->core);
 	clk_disable_unprepare(res->slave_bus);
@@ -410,9 +410,9 @@ static void qcom_pcie_deinit_v1(struct qcom_pcie *pcie)
 	regulator_disable(res->vdda);
 }
 
-static int qcom_pcie_init_v1(struct qcom_pcie *pcie)
+static int qcom_pcie_init_1_0_0(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
+	struct qcom_pcie_resources_1_0_0 *res = &pcie->res.v1_0_0;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
 	int ret;
@@ -478,7 +478,7 @@ static int qcom_pcie_init_v1(struct qcom_pcie *pcie)
 	return ret;
 }
 
-static void qcom_pcie_v2_ltssm_enable(struct qcom_pcie *pcie)
+static void qcom_pcie_2_3_2_ltssm_enable(struct qcom_pcie *pcie)
 {
 	u32 val;
 
@@ -488,9 +488,9 @@ static void qcom_pcie_v2_ltssm_enable(struct qcom_pcie *pcie)
 	writel(val, pcie->parf + PCIE20_PARF_LTSSM);
 }
 
-static int qcom_pcie_get_resources_v2(struct qcom_pcie *pcie)
+static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v2 *res = &pcie->res.v2;
+	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
 
@@ -514,9 +514,9 @@ static int qcom_pcie_get_resources_v2(struct qcom_pcie *pcie)
 	return PTR_ERR_OR_ZERO(res->pipe_clk);
 }
 
-static void qcom_pcie_deinit_v2(struct qcom_pcie *pcie)
+static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v2 *res = &pcie->res.v2;
+	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
 
 	clk_disable_unprepare(res->slave_clk);
 	clk_disable_unprepare(res->master_clk);
@@ -524,16 +524,16 @@ static void qcom_pcie_deinit_v2(struct qcom_pcie *pcie)
 	clk_disable_unprepare(res->aux_clk);
 }
 
-static void qcom_pcie_post_deinit_v2(struct qcom_pcie *pcie)
+static void qcom_pcie_post_deinit_2_3_2(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v2 *res = &pcie->res.v2;
+	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
 
 	clk_disable_unprepare(res->pipe_clk);
 }
 
-static int qcom_pcie_init_v2(struct qcom_pcie *pcie)
+static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v2 *res = &pcie->res.v2;
+	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
 	u32 val;
@@ -596,9 +596,9 @@ static int qcom_pcie_init_v2(struct qcom_pcie *pcie)
 	return ret;
 }
 
-static int qcom_pcie_post_init_v2(struct qcom_pcie *pcie)
+static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v2 *res = &pcie->res.v2;
+	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
 	int ret;
@@ -612,9 +612,9 @@ static int qcom_pcie_post_init_v2(struct qcom_pcie *pcie)
 	return 0;
 }
 
-static int qcom_pcie_get_resources_v3(struct qcom_pcie *pcie)
+static int qcom_pcie_get_resources_2_4_0(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v3 *res = &pcie->res.v3;
+	struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
 
@@ -685,9 +685,9 @@ static int qcom_pcie_get_resources_v3(struct qcom_pcie *pcie)
 	return 0;
 }
 
-static void qcom_pcie_deinit_v3(struct qcom_pcie *pcie)
+static void qcom_pcie_deinit_2_4_0(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v3 *res = &pcie->res.v3;
+	struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
 
 	reset_control_assert(res->axi_m_reset);
 	reset_control_assert(res->axi_s_reset);
@@ -703,9 +703,9 @@ static void qcom_pcie_deinit_v3(struct qcom_pcie *pcie)
 	clk_disable_unprepare(res->slave_clk);
 }
 
-static int qcom_pcie_init_v3(struct qcom_pcie *pcie)
+static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)
 {
-	struct qcom_pcie_resources_v3 *res = &pcie->res.v3;
+	struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
 	u32 val;
@@ -969,38 +969,42 @@ static int qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
 	.rd_own_conf = qcom_pcie_rd_own_conf,
 };
 
-static const struct qcom_pcie_ops ops_v0 = {
-	.get_resources = qcom_pcie_get_resources_v0,
-	.init = qcom_pcie_init_v0,
-	.deinit = qcom_pcie_deinit_v0,
-	.ltssm_enable = qcom_pcie_v0_v1_ltssm_enable,
+/* Qcom IP rev.: 2.1.0	Synopsys IP rev.: 4.01a */
+static const struct qcom_pcie_ops ops_2_1_0 = {
+	.get_resources = qcom_pcie_get_resources_2_1_0,
+	.init = qcom_pcie_init_2_1_0,
+	.deinit = qcom_pcie_deinit_2_1_0,
+	.ltssm_enable = qcom_pcie_2_1_0_ltssm_enable,
 };
 
-static const struct qcom_pcie_ops ops_v1 = {
-	.get_resources = qcom_pcie_get_resources_v1,
-	.init = qcom_pcie_init_v1,
-	.deinit = qcom_pcie_deinit_v1,
-	.ltssm_enable = qcom_pcie_v0_v1_ltssm_enable,
+/* Qcom IP rev.: 1.0.0	Synopsys IP rev.: 4.11a */
+static const struct qcom_pcie_ops ops_1_0_0 = {
+	.get_resources = qcom_pcie_get_resources_1_0_0,
+	.init = qcom_pcie_init_1_0_0,
+	.deinit = qcom_pcie_deinit_1_0_0,
+	.ltssm_enable = qcom_pcie_2_1_0_ltssm_enable,
 };
 
-static const struct qcom_pcie_ops ops_v2 = {
-	.get_resources = qcom_pcie_get_resources_v2,
-	.init = qcom_pcie_init_v2,
-	.post_init = qcom_pcie_post_init_v2,
-	.deinit = qcom_pcie_deinit_v2,
-	.post_deinit = qcom_pcie_post_deinit_v2,
-	.ltssm_enable = qcom_pcie_v2_ltssm_enable,
+/* Qcom IP rev.: 2.3.2	Synopsys IP rev.: 4.21a */
+static const struct qcom_pcie_ops ops_2_3_2 = {
+	.get_resources = qcom_pcie_get_resources_2_3_2,
+	.init = qcom_pcie_init_2_3_2,
+	.post_init = qcom_pcie_post_init_2_3_2,
+	.deinit = qcom_pcie_deinit_2_3_2,
+	.post_deinit = qcom_pcie_post_deinit_2_3_2,
+	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 };
 
-static const struct dw_pcie_ops dw_pcie_ops = {
-	.link_up = qcom_pcie_link_up,
+/* Qcom IP rev.: 2.4.0	Synopsys IP rev.: 4.20a */
+static const struct qcom_pcie_ops ops_2_4_0 = {
+	.get_resources = qcom_pcie_get_resources_2_4_0,
+	.init = qcom_pcie_init_2_4_0,
+	.deinit = qcom_pcie_deinit_2_4_0,
+	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 };
 
-static const struct qcom_pcie_ops ops_v3 = {
-	.get_resources = qcom_pcie_get_resources_v3,
-	.init = qcom_pcie_init_v3,
-	.deinit = qcom_pcie_deinit_v3,
-	.ltssm_enable = qcom_pcie_v2_ltssm_enable,
+static const struct dw_pcie_ops dw_pcie_ops = {
+	.link_up = qcom_pcie_link_up,
 };
 
 static int qcom_pcie_probe(struct platform_device *pdev)
@@ -1089,11 +1093,11 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id qcom_pcie_match[] = {
-	{ .compatible = "qcom,pcie-ipq8064", .data = &ops_v0 },
-	{ .compatible = "qcom,pcie-apq8064", .data = &ops_v0 },
-	{ .compatible = "qcom,pcie-apq8084", .data = &ops_v1 },
-	{ .compatible = "qcom,pcie-msm8996", .data = &ops_v2 },
-	{ .compatible = "qcom,pcie-ipq4019", .data = &ops_v3 },
+	{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
+	{ .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 },
+	{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
+	{ .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 },
+	{ .compatible = "qcom,pcie-ipq4019", .data = &ops_2_4_0 },
 	{ }
 };
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[PATCH v9 2/3] dt-bindings: pci: qcom: Add support for IPQ8074

[Varadarajan Narayanan]

Add support for the IPQ8074 PCIe controller.  IPQ8074 supports Gen 1/2, one
lane, two PCIe root complex with support for MSI and legacy interrupts, and
it conforms to PCI Express Base 2.1 specification.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 .../devicetree/bindings/pci/qcom,pcie.txt          | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index 9d418b7..b3e36ef 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -9,6 +9,7 @@
 			- "qcom,pcie-apq8084" for apq8084
 			- "qcom,pcie-msm8996" for msm8996 or apq8096
 			- "qcom,pcie-ipq4019" for ipq4019
+			- "qcom,pcie-ipq8074" for ipq8074
 
 - reg:
 	Usage: required
@@ -105,6 +106,16 @@
 			- "bus_master"	Master AXI clock
 			- "bus_slave"	Slave AXI clock
 
+- clock-names:
+	Usage: required for ipq8074
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "iface"	PCIe to SysNOC BIU clock
+			- "axi_m"	AXI Master clock
+			- "axi_s"	AXI Slave clock
+			- "ahb"		AHB clock
+			- "aux"		Auxiliary clock
+
 - resets:
 	Usage: required
 	Value type: <prop-encoded-array>
@@ -144,6 +155,18 @@
 			- "ahb"			AHB reset
 			- "phy_ahb"		PHY AHB reset
 
+- reset-names:
+	Usage: required for ipq8074
+	Value type: <stringlist>
+	Definition: Should contain the following entries
+			- "pipe"		PIPE reset
+			- "sleep"		Sleep reset
+			- "sticky"		Core Sticky reset
+			- "axi_m"		AXI Master reset
+			- "axi_s"		AXI Slave reset
+			- "ahb"			AHB Reset
+			- "axi_m_sticky"	AXI Master Sticky reset
+
 - power-domains:
 	Usage: required for apq8084 and msm8996/apq8096
 	Value type: <prop-encoded-array>
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

[PATCH v9 3/3] PCI: dwc: qcom: Add support for IPQ8074 PCIe controller

[Varadarajan Narayanan]

Add support for the IPQ8074 PCIe controller.  IPQ8074 supports
Gen 1/2, one lane, two PCIe root complex with support for MSI and
legacy interrupts, and it conforms to PCI Express Base 2.1
specification.

The core init is the similar to the existing SoC, however the
clocks and reset lines differ.

Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: smuthayy <smuthayy@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
---
 drivers/pci/dwc/pcie-qcom.c | 210 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 209 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c
index 4ec5cd9..6f6dbde 100644
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
@@ -37,6 +37,20 @@
 #include "pcie-designware.h"
 
 #define PCIE20_PARF_SYS_CTRL			0x00
+#define MST_WAKEUP_EN				BIT(13)
+#define SLV_WAKEUP_EN				BIT(12)
+#define MSTR_ACLK_CGC_DIS			BIT(10)
+#define SLV_ACLK_CGC_DIS			BIT(9)
+#define CORE_CLK_CGC_DIS			BIT(6)
+#define AUX_PWR_DET				BIT(4)
+#define L23_CLK_RMV_DIS				BIT(2)
+#define L1_CLK_RMV_DIS				BIT(1)
+
+#define PCIE20_COMMAND_STATUS			0x04
+#define CMD_BME_VAL				0x4
+#define PCIE20_DEVICE_CONTROL2_STATUS2		0x98
+#define PCIE_CAP_CPL_TIMEOUT_DISABLE		0x10
+
 #define PCIE20_PARF_PHY_CTRL			0x40
 #define PCIE20_PARF_PHY_REFCLK			0x4C
 #define PCIE20_PARF_DBI_BASE_ADDR		0x168
@@ -58,9 +72,21 @@
 #define CFG_BRIDGE_SB_INIT			BIT(0)
 
 #define PCIE20_CAP				0x70
+#define PCIE20_CAP_LINK_CAPABILITIES		(PCIE20_CAP + 0xc)
+#define PCIE20_CAP_ACTIVE_STATE_LINK_PM_SUPPORT	(BIT(10) | BIT(11))
+#define PCIE20_CAP_LINK_1			(PCIE20_CAP + 0x14)
+#define PCIE_CAP_LINK1_VAL			0x2fd7f
+
+#define PCIE20_PARF_Q2A_FLUSH			0x1ac
+
+#define PCIE20_MISC_CONTROL_1_REG		0x8bc
+#define DBI_RO_WR_EN				1
 
 #define PERST_DELAY_US				1000
 
+#define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE	0x358
+#define SLV_ADDR_SPACE_SZ			0x10000000
+
 struct qcom_pcie_resources_2_1_0 {
 	struct clk *iface_clk;
 	struct clk *core_clk;
@@ -110,10 +136,20 @@ struct qcom_pcie_resources_2_4_0 {
 	struct reset_control *phy_ahb_reset;
 };
 
+struct qcom_pcie_resources_2_3_3 {
+	struct clk *iface;
+	struct clk *axi_m_clk;
+	struct clk *axi_s_clk;
+	struct clk *ahb_clk;
+	struct clk *aux_clk;
+	struct reset_control *rst[7];
+};
+
 union qcom_pcie_resources {
 	struct qcom_pcie_resources_1_0_0 v1_0_0;
 	struct qcom_pcie_resources_2_1_0 v2_1_0;
 	struct qcom_pcie_resources_2_3_2 v2_3_2;
+	struct qcom_pcie_resources_2_3_3 v2_3_3;
 	struct qcom_pcie_resources_2_4_0 v2_4_0;
 };
 
@@ -895,6 +931,169 @@ static int qcom_pcie_init_2_4_0(struct qcom_pcie *pcie)
 	return ret;
 }
 
+static int qcom_pcie_get_resources_2_3_3(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
+	struct dw_pcie *pci = pcie->pci;
+	struct device *dev = pci->dev;
+	int i;
+	const char *rst_names[] = { "axi_m", "axi_s", "pipe",
+				    "axi_m_sticky", "sticky",
+				    "ahb", "sleep", };
+
+	res->iface = devm_clk_get(dev, "iface");
+	if (IS_ERR(res->iface))
+		return PTR_ERR(res->iface);
+
+	res->axi_m_clk = devm_clk_get(dev, "axi_m");
+	if (IS_ERR(res->axi_m_clk))
+		return PTR_ERR(res->axi_m_clk);
+
+	res->axi_s_clk = devm_clk_get(dev, "axi_s");
+	if (IS_ERR(res->axi_s_clk))
+		return PTR_ERR(res->axi_s_clk);
+
+	res->ahb_clk = devm_clk_get(dev, "ahb");
+	if (IS_ERR(res->ahb_clk))
+		return PTR_ERR(res->ahb_clk);
+
+	res->aux_clk = devm_clk_get(dev, "aux");
+	if (IS_ERR(res->aux_clk))
+		return PTR_ERR(res->aux_clk);
+
+	for (i = 0; i < ARRAY_SIZE(rst_names); i++) {
+		res->rst[i] = devm_reset_control_get(dev, rst_names[i]);
+		if (IS_ERR(res->rst[i]))
+			return PTR_ERR(res->rst[i]);
+	}
+
+	return 0;
+}
+
+static void qcom_pcie_deinit_2_3_3(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
+
+	clk_disable_unprepare(res->iface);
+	clk_disable_unprepare(res->axi_m_clk);
+	clk_disable_unprepare(res->axi_s_clk);
+	clk_disable_unprepare(res->ahb_clk);
+	clk_disable_unprepare(res->aux_clk);
+}
+
+static int qcom_pcie_init_2_3_3(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_resources_2_3_3 *res = &pcie->res.v2_3_3;
+	struct dw_pcie *pci = pcie->pci;
+	struct device *dev = pci->dev;
+	int i, ret;
+	u32 val;
+
+	for (i = 0; i < ARRAY_SIZE(res->rst); i++) {
+		ret = reset_control_assert(res->rst[i]);
+		if (ret) {
+			dev_err(pcie->pci->dev,
+				"%s: reset assert failed for %d\n",
+				__func__, i);
+			return ret;
+		}
+	}
+
+	usleep_range(2000, 2500);
+
+	for (i = 0; i < ARRAY_SIZE(res->rst); i++) {
+		ret = reset_control_deassert(res->rst[i]);
+		if (ret) {
+			dev_err(pcie->pci->dev,
+				"%s: reset deassert failed for %d\n",
+				__func__, i);
+			return ret;
+		}
+	}
+
+	/*
+	 * Don't have a way to see if the reset has completed.
+	 * Wait for some time.
+	 */
+	usleep_range(2000, 2500);
+
+	ret = clk_prepare_enable(res->iface);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable core clock\n");
+		goto err_clk_iface;
+	}
+
+	ret = clk_prepare_enable(res->axi_m_clk);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable core clock\n");
+		goto err_clk_axi_m;
+	}
+
+	ret = clk_prepare_enable(res->axi_s_clk);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable axi slave clock\n");
+		goto err_clk_axi_s;
+	}
+
+	ret = clk_prepare_enable(res->ahb_clk);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable ahb clock\n");
+		goto err_clk_ahb;
+	}
+
+	ret = clk_prepare_enable(res->aux_clk);
+	if (ret) {
+		dev_err(dev, "cannot prepare/enable aux clock\n");
+		goto err_clk_aux;
+	}
+
+	writel(SLV_ADDR_SPACE_SZ,
+		pcie->parf + PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE);
+
+	val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
+	val &= ~BIT(0);
+	writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
+
+	writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
+
+	writel(MST_WAKEUP_EN | SLV_WAKEUP_EN | MSTR_ACLK_CGC_DIS
+		| SLV_ACLK_CGC_DIS | CORE_CLK_CGC_DIS |
+		AUX_PWR_DET | L23_CLK_RMV_DIS | L1_CLK_RMV_DIS,
+		pcie->parf + PCIE20_PARF_SYS_CTRL);
+	writel(0, pcie->parf + PCIE20_PARF_Q2A_FLUSH);
+
+	writel(CMD_BME_VAL, pci->dbi_base + PCIE20_COMMAND_STATUS);
+	writel(DBI_RO_WR_EN, pci->dbi_base + PCIE20_MISC_CONTROL_1_REG);
+	writel(PCIE_CAP_LINK1_VAL, pci->dbi_base + PCIE20_CAP_LINK_1);
+
+	val = readl(pci->dbi_base + PCIE20_CAP_LINK_CAPABILITIES);
+	val &= ~PCIE20_CAP_ACTIVE_STATE_LINK_PM_SUPPORT;
+	writel(val, pci->dbi_base + PCIE20_CAP_LINK_CAPABILITIES);
+
+	writel(PCIE_CAP_CPL_TIMEOUT_DISABLE, pci->dbi_base +
+		PCIE20_DEVICE_CONTROL2_STATUS2);
+
+	return 0;
+
+err_clk_aux:
+	clk_disable_unprepare(res->ahb_clk);
+err_clk_ahb:
+	clk_disable_unprepare(res->axi_s_clk);
+err_clk_axi_s:
+	clk_disable_unprepare(res->axi_m_clk);
+err_clk_axi_m:
+	clk_disable_unprepare(res->iface);
+err_clk_iface:
+	/*
+	 * Not checking for failure, will anyway return
+	 * the original failure in 'ret'.
+	 */
+	for (i = 0; i < ARRAY_SIZE(res->rst); i++)
+		reset_control_assert(res->rst[i]);
+
+	return ret;
+}
+
 static int qcom_pcie_link_up(struct dw_pcie *pci)
 {
 	u16 val = readw(pci->dbi_base + PCIE20_CAP + PCI_EXP_LNKSTA);
@@ -1003,6 +1202,14 @@ static int qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 };
 
+/* Qcom IP rev.: 2.3.3	Synopsys IP rev.: 4.30a */
+static const struct qcom_pcie_ops ops_2_3_3 = {
+	.get_resources = qcom_pcie_get_resources_2_3_3,
+	.init = qcom_pcie_init_2_3_3,
+	.deinit = qcom_pcie_deinit_2_3_3,
+	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
+};
+
 static const struct dw_pcie_ops dw_pcie_ops = {
 	.link_up = qcom_pcie_link_up,
 };
@@ -1093,10 +1300,11 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id qcom_pcie_match[] = {
+	{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
 	{ .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
 	{ .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 },
-	{ .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
 	{ .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 },
+	{ .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 },
 	{ .compatible = "qcom,pcie-ipq4019", .data = &ops_2_4_0 },
 	{ }
 };
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH v9 0/3] Add support for IPQ8074 PCIe phy and controller

[Varadarajan Narayanan]

On Fri, Aug 18, 2017 at 12:59:50PM +0530, Varadarajan Narayanan wrote:
> v9:
>   Incorporate Stanimir's feedback for
> 	PCI: dwc: qcom: Add support for IPQ8074 PCIe controller

Forgot to mention that the patches were rebased against
Bjorn's pci.git/next.

Thanks
Varada

>   Add Stanimir's Ack for
> 	PCI: dwc: qcom: Use block IP version for operations
> 	PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
>
>   Add Rob's Ack for
> 	dt-bindings: pci: qcom: Add support for IPQ8074
>
> v8:
>   Incorporate Stanimir's feedback for
> 	PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
>
> v7:
>   Skip PHY patches as they are already included by Kishon
>
>   Incorporate Stanimir's feedback for the below patches
> 	PCI: dwc: qcom: Use block IP version for operations
> 	PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
>
> v6:
>   Added 'Reviewed-by: Vivek Gautam <vivek.gautam-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>' and fixed
>   white space issues as mentioned by Vivek.
> 	phy: qcom-qmp: Fix phy pipe clock name
> 	dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
>
> v5:
>   dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
>         Renamed phy_phy clock as common clock
>
>   phy: qcom-qmp: Fix phy pipe clock name
>         Moved the DT get into the registering function
>
>   phy: qcom-qmp: Add support for IPQ8074
>         Place the IPQ8074 related structs similar to existing SoC.
>         Renamed phy_phy clock as common clock
> v4:
>   phy: qcom-qmp: Fix phy pipe clock name
> 	Based on Vivek's comments, return failure only for
> 	PCI/USB type of phys.
> 	Removed Ack.
>
>   phy: qcom-qmp: Handle unavailable registers
> 	Removed this patch.
> 	Incorrectly used a block of code that is not applicable
> 	to IPQ8074, hence had to avoid an "unavailable" register.
> 	Since that is addressed using 'has_phy_com_ctrl' this
> 	patch is not needed.
>
>   phy: qcom-qmp: Add support for IPQ8074
> 	Set 'has_phy_com_ctrl' to false
> 	Remove ipq8074_pciephy_regs_layout
>
> v3:
>   PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
> 	Incoporate Stan's feedback:-
> 	 - Add SoC Wrapper and Synopsys Core IP versions
>
> v2:
>   dt-bindings: phy: qmp: Add output-clock-names
> 	Added Rob H's Ack
>
>   dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
> 	Removed example
> 	Added IPQ8074 specific details
>
>   phy: qcom-qmp: Fix phy pipe clock name
> 	Added Vivek's Ack
>
>   phy: qcom-qmp: Handle unavailable registers
> 	No changes
>
>   phy: qcom-qmp: Add support for IPQ8074
> 	No changes
>
>   PCI: dwc: qcom: Use block IP version for operations
> 	Added new patch to use block IP version instead of v1, v2...
>
>   dt-bindings: pci: qcom: Add support for IPQ8074
> 	Removed example
> 	Added IPQ8074 specific details
>
>   PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
> 	Incorporated Bjorn's feedback:-
> 	 - Removed reset names, helper function to assert/deassert, helper
> 	   function to R/M/W register.
> 	 - Renamed sys_noc clock as iface clock
> 	 - Added deinit if phy power on fails
>
> v1:
> Add definitions required to enable QMP phy support for IPQ8074.
>
> Add support for the IPQ8074 PCIe controller.  IPQ8074 supports
> Gen 1/2, one lane, two PCIe root complex with support for MSI and
> legacy interrupts, and it conforms to PCI Express Base 2.1
> specification.
>
> Varadarajan Narayanan (3):
>   PCI: dwc: qcom: Use block IP version for operations
>   dt-bindings: pci: qcom: Add support for IPQ8074
>   PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
>
>  .../devicetree/bindings/pci/qcom,pcie.txt          |  23 ++
>  drivers/pci/dwc/pcie-qcom.c                        | 346 +++++++++++++++++----
>  2 files changed, 302 insertions(+), 67 deletions(-)
>
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
>

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v9 0/3] Add support for IPQ8074 PCIe phy and controller

[Bjorn Helgaas]

On Fri, Aug 18, 2017 at 12:59:50PM +0530, Varadarajan Narayanan wrote:
> v9:
>   Incorporate Stanimir's feedback for
> 	PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
> 
>   Add Stanimir's Ack for
> 	PCI: dwc: qcom: Use block IP version for operations
> 	PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
> 
>   Add Rob's Ack for
> 	dt-bindings: pci: qcom: Add support for IPQ8074
> 
> v8:
>   Incorporate Stanimir's feedback for
> 	PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
> 
> v7:
>   Skip PHY patches as they are already included by Kishon
> 
>   Incorporate Stanimir's feedback for the below patches
> 	PCI: dwc: qcom: Use block IP version for operations
> 	PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
> 
> v6:
>   Added 'Reviewed-by: Vivek Gautam <vivek.gautam-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>' and fixed
>   white space issues as mentioned by Vivek.
> 	phy: qcom-qmp: Fix phy pipe clock name
> 	dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
> 
> v5:
>   dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
>         Renamed phy_phy clock as common clock
> 
>   phy: qcom-qmp: Fix phy pipe clock name
>         Moved the DT get into the registering function
> 
>   phy: qcom-qmp: Add support for IPQ8074
>         Place the IPQ8074 related structs similar to existing SoC.
>         Renamed phy_phy clock as common clock
> v4:
>   phy: qcom-qmp: Fix phy pipe clock name
> 	Based on Vivek's comments, return failure only for
> 	PCI/USB type of phys.
> 	Removed Ack.
> 
>   phy: qcom-qmp: Handle unavailable registers
> 	Removed this patch.
> 	Incorrectly used a block of code that is not applicable
> 	to IPQ8074, hence had to avoid an "unavailable" register.
> 	Since that is addressed using 'has_phy_com_ctrl' this
> 	patch is not needed.
> 
>   phy: qcom-qmp: Add support for IPQ8074
> 	Set 'has_phy_com_ctrl' to false
> 	Remove ipq8074_pciephy_regs_layout
> 
> v3:
>   PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
> 	Incoporate Stan's feedback:-
> 	 - Add SoC Wrapper and Synopsys Core IP versions
> 
> v2:
>   dt-bindings: phy: qmp: Add output-clock-names
> 	Added Rob H's Ack
> 
>   dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
> 	Removed example
> 	Added IPQ8074 specific details
> 
>   phy: qcom-qmp: Fix phy pipe clock name
> 	Added Vivek's Ack
> 
>   phy: qcom-qmp: Handle unavailable registers
> 	No changes
> 
>   phy: qcom-qmp: Add support for IPQ8074
> 	No changes
> 
>   PCI: dwc: qcom: Use block IP version for operations
> 	Added new patch to use block IP version instead of v1, v2...
> 
>   dt-bindings: pci: qcom: Add support for IPQ8074
> 	Removed example
> 	Added IPQ8074 specific details
> 
>   PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
> 	Incorporated Bjorn's feedback:-
> 	 - Removed reset names, helper function to assert/deassert, helper
> 	   function to R/M/W register.
> 	 - Renamed sys_noc clock as iface clock
> 	 - Added deinit if phy power on fails
> 
> v1:
> Add definitions required to enable QMP phy support for IPQ8074.
> 
> Add support for the IPQ8074 PCIe controller.  IPQ8074 supports
> Gen 1/2, one lane, two PCIe root complex with support for MSI and
> legacy interrupts, and it conforms to PCI Express Base 2.1
> specification.
> 
> Varadarajan Narayanan (3):
>   PCI: dwc: qcom: Use block IP version for operations
>   dt-bindings: pci: qcom: Add support for IPQ8074
>   PCI: dwc: qcom: Add support for IPQ8074 PCIe controller
> 
>  .../devicetree/bindings/pci/qcom,pcie.txt          |  23 ++
>  drivers/pci/dwc/pcie-qcom.c                        | 346 +++++++++++++++++----
>  2 files changed, 302 insertions(+), 67 deletions(-)

Applied to pci/host-qcom for v4.14, thanks!

I made minor tweaks to match existing code style in pcie-qcom.c.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html