* [PATCH v2 1/4] ARM: dts: r8a7790: Stop grouping clocks under a "clocks" subnode
2017-08-18 9:16 [PATCH v2 0/4] ARM: dts: rcar-gen2: Stop grouping clocks under a "clocks" subnode Geert Uytterhoeven
@ 2017-08-18 9:16 ` Geert Uytterhoeven
2017-08-18 9:16 ` [PATCH v2 2/4] ARM: dts: r8a7791: " Geert Uytterhoeven
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Geert Uytterhoeven @ 2017-08-18 9:16 UTC (permalink / raw)
To: Simon Horman, Magnus Damm
Cc: linux-renesas-soc, linux-clk, linux-arm-kernel, devicetree,
Geert Uytterhoeven
The current practice is to not group clocks under a "clocks" subnode,
but just put them together with the other on-SoC devices.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7790.dtsi | 137 ++++++++++++++++++++---------------------
1 file changed, 66 insertions(+), 71 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 5a31dfc0c3163d6c..70040c6c4ceac114 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1061,77 +1061,72 @@
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
- clocks {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- /* External root clock */
- extal_clk: extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overriden by the board. */
- clock-frequency = <0>;
- };
-
- /* External PCIe clock - can be overridden by the board */
- pcie_bus_clk: pcie_bus {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- /*
- * The external audio clocks are configured as 0 Hz fixed frequency clocks by
- * default. Boards that provide audio clocks should override them.
- */
- audio_clk_a: audio_clk_a {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clk_b: audio_clk_b {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clk_c: audio_clk_c {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- /* External SCIF clock */
- scif_clk: scif {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /* External USB clock - can be overridden by the board */
- usb_extal_clk: usb_extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <48000000>;
- };
-
- /* External CAN clock */
- can_clk: can {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- cpg: clock-controller@e6150000 {
- compatible = "renesas,r8a7790-cpg-mssr";
- reg = <0 0xe6150000 0 0x1000>;
- clocks = <&extal_clk>, <&usb_extal_clk>;
- clock-names = "extal", "usb_extal";
- #clock-cells = <2>;
- #power-domain-cells = <0>;
- };
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a7790-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&usb_extal_clk>;
+ clock-names = "extal", "usb_extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
};
prr: chipid@ff000044 {
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v2 2/4] ARM: dts: r8a7791: Stop grouping clocks under a "clocks" subnode
2017-08-18 9:16 [PATCH v2 0/4] ARM: dts: rcar-gen2: Stop grouping clocks under a "clocks" subnode Geert Uytterhoeven
2017-08-18 9:16 ` [PATCH v2 1/4] ARM: dts: r8a7790: " Geert Uytterhoeven
@ 2017-08-18 9:16 ` Geert Uytterhoeven
2017-08-18 9:16 ` [PATCH v2 3/4] ARM: dts: r8a7793: " Geert Uytterhoeven
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Geert Uytterhoeven @ 2017-08-18 9:16 UTC (permalink / raw)
To: Simon Horman, Magnus Damm
Cc: linux-renesas-soc, linux-clk, linux-arm-kernel, devicetree,
Geert Uytterhoeven
The current practice is to not group clocks under a "clocks" subnode,
but just put them together with the other on-SoC devices.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7791.dtsi | 137 ++++++++++++++++++++---------------------
1 file changed, 66 insertions(+), 71 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 5fca397b722bfa66..e984b106dd1acd7b 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1097,77 +1097,72 @@
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
};
- clocks {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- /* External root clock */
- extal_clk: extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overriden by the board. */
- clock-frequency = <0>;
- };
-
- /*
- * The external audio clocks are configured as 0 Hz fixed frequency clocks by
- * default. Boards that provide audio clocks should override them.
- */
- audio_clk_a: audio_clk_a {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clk_b: audio_clk_b {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clk_c: audio_clk_c {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- /* External PCIe clock - can be overridden by the board */
- pcie_bus_clk: pcie_bus {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- /* External SCIF clock */
- scif_clk: scif {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /* External USB clock - can be overridden by the board */
- usb_extal_clk: usb_extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <48000000>;
- };
-
- /* External CAN clock */
- can_clk: can {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- cpg: clock-controller@e6150000 {
- compatible = "renesas,r8a7791-cpg-mssr";
- reg = <0 0xe6150000 0 0x1000>;
- clocks = <&extal_clk>, <&usb_extal_clk>;
- clock-names = "extal", "usb_extal";
- #clock-cells = <2>;
- #power-domain-cells = <0>;
- };
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a7791-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&usb_extal_clk>;
+ clock-names = "extal", "usb_extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
};
rst: reset-controller@e6160000 {
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v2 3/4] ARM: dts: r8a7793: Stop grouping clocks under a "clocks" subnode
2017-08-18 9:16 [PATCH v2 0/4] ARM: dts: rcar-gen2: Stop grouping clocks under a "clocks" subnode Geert Uytterhoeven
2017-08-18 9:16 ` [PATCH v2 1/4] ARM: dts: r8a7790: " Geert Uytterhoeven
2017-08-18 9:16 ` [PATCH v2 2/4] ARM: dts: r8a7791: " Geert Uytterhoeven
@ 2017-08-18 9:16 ` Geert Uytterhoeven
2017-08-18 9:16 ` [PATCH v2 4/4] ARM: dts: r8a7794: " Geert Uytterhoeven
2017-08-21 9:06 ` [PATCH v2 0/4] ARM: dts: rcar-gen2: " Simon Horman
4 siblings, 0 replies; 6+ messages in thread
From: Geert Uytterhoeven @ 2017-08-18 9:16 UTC (permalink / raw)
To: Simon Horman, Magnus Damm
Cc: linux-renesas-soc, linux-clk, linux-arm-kernel, devicetree,
Geert Uytterhoeven
The current practice is to not group clocks under a "clocks" subnode,
but just put them together with the other on-SoC devices.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7793.dtsi | 125 ++++++++++++++++++++---------------------
1 file changed, 60 insertions(+), 65 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index ef8009c01e663e5c..d48b97c853cdc4d2 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -972,71 +972,66 @@
status = "disabled";
};
- clocks {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- /* External root clock */
- extal_clk: extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /*
- * The external audio clocks are configured as 0 Hz fixed frequency clocks by
- * default. Boards that provide audio clocks should override them.
- */
- audio_clk_a: audio_clk_a {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clk_b: audio_clk_b {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clk_c: audio_clk_c {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- /* External USB clock - can be overridden by the board */
- usb_extal_clk: usb_extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <48000000>;
- };
-
- /* External CAN clock */
- can_clk: can {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /* External SCIF clock */
- scif_clk: scif {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /* Special CPG clocks */
- cpg: clock-controller@e6150000 {
- compatible = "renesas,r8a7793-cpg-mssr";
- reg = <0 0xe6150000 0 0x1000>;
- clocks = <&extal_clk>, <&usb_extal_clk>;
- clock-names = "extal", "usb_extal";
- #clock-cells = <2>;
- #power-domain-cells = <0>;
- };
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* Special CPG clocks */
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a7793-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&usb_extal_clk>;
+ clock-names = "extal", "usb_extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
};
rst: reset-controller@e6160000 {
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v2 4/4] ARM: dts: r8a7794: Stop grouping clocks under a "clocks" subnode
2017-08-18 9:16 [PATCH v2 0/4] ARM: dts: rcar-gen2: Stop grouping clocks under a "clocks" subnode Geert Uytterhoeven
` (2 preceding siblings ...)
2017-08-18 9:16 ` [PATCH v2 3/4] ARM: dts: r8a7793: " Geert Uytterhoeven
@ 2017-08-18 9:16 ` Geert Uytterhoeven
2017-08-21 9:06 ` [PATCH v2 0/4] ARM: dts: rcar-gen2: " Simon Horman
4 siblings, 0 replies; 6+ messages in thread
From: Geert Uytterhoeven @ 2017-08-18 9:16 UTC (permalink / raw)
To: Simon Horman, Magnus Damm
Cc: linux-renesas-soc, linux-clk, linux-arm-kernel, devicetree,
Geert Uytterhoeven
The current practice is to not group clocks under a "clocks" subnode,
but just put them together with the other on-SoC devices.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7794.dtsi | 124 ++++++++++++++++++++---------------------
1 file changed, 59 insertions(+), 65 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index ebd44d9982be07cc..a4c35d29f77c16dc 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -982,71 +982,65 @@
status = "disabled";
};
- clocks {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- /* External root clock */
- extal_clk: extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overriden by the board. */
- clock-frequency = <0>;
- };
-
- /* External USB clock - can be overridden by the board */
- usb_extal_clk: usb_extal {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <48000000>;
- };
-
- /* External CAN clock */
- can_clk: can {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /* External SCIF clock */
- scif_clk: scif {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- /* This value must be overridden by the board. */
- clock-frequency = <0>;
- };
-
- /*
- * The external audio clocks are configured as 0 Hz fixed
- * frequency clocks by default. Boards that provide audio
- * clocks should override them.
- */
- audio_clka: audio_clka {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clkb: audio_clkb {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
- audio_clkc: audio_clkc {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
- cpg: clock-controller@e6150000 {
- compatible = "renesas,r8a7794-cpg-mssr";
- reg = <0 0xe6150000 0 0x1000>;
- clocks = <&extal_clk>, <&usb_extal_clk>;
- clock-names = "extal", "usb_extal";
- #clock-cells = <2>;
- #power-domain-cells = <0>;
- };
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ /* External CAN clock */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /*
+ * The external audio clocks are configured as 0 Hz fixed
+ * frequency clocks by default. Boards that provide audio
+ * clocks should override them.
+ */
+ audio_clka: audio_clka {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clkb: audio_clkb {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clkc: audio_clkc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a7794-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&usb_extal_clk>;
+ clock-names = "extal", "usb_extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
};
rst: reset-controller@e6160000 {
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v2 0/4] ARM: dts: rcar-gen2: Stop grouping clocks under a "clocks" subnode
2017-08-18 9:16 [PATCH v2 0/4] ARM: dts: rcar-gen2: Stop grouping clocks under a "clocks" subnode Geert Uytterhoeven
` (3 preceding siblings ...)
2017-08-18 9:16 ` [PATCH v2 4/4] ARM: dts: r8a7794: " Geert Uytterhoeven
@ 2017-08-21 9:06 ` Simon Horman
4 siblings, 0 replies; 6+ messages in thread
From: Simon Horman @ 2017-08-21 9:06 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Magnus Damm, linux-renesas-soc, linux-clk, linux-arm-kernel,
devicetree
On Fri, Aug 18, 2017 at 11:16:53AM +0200, Geert Uytterhoeven wrote:
> Hi Simon, Magnus,
>
> The current practice is to not group clocks under a "clocks" subnode,
> but just put them together with the other on-SoC devices.
>
> Hence this patch series implements this for the various R-Car Gen2
> DTSes that still need this (r8a7792.dtsi is OK).
>
> Changes compared to v1:
> - Rebased.
>
> Dependencies:
> - renesas-devel-20170818-v4.13-rc5,
> - Patch series "[PATCH v2 0/5] ARM: dts: rcar-gen2: Convert to new
> CPG/MSSR bindings".
>
> For your convenience, this series is also available in the
> topic/rcar2-cpg-mssr-dt-v2 branch of my renesas-drivers git repository at
> git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git.
>
> Thanks for applying!
>
> Geert Uytterhoeven (4):
> ARM: dts: r8a7790: Stop grouping clocks under a "clocks" subnode
> ARM: dts: r8a7791: Stop grouping clocks under a "clocks" subnode
> ARM: dts: r8a7793: Stop grouping clocks under a "clocks" subnode
> ARM: dts: r8a7794: Stop grouping clocks under a "clocks" subnode
Thanks. r8a779[034] patches applied for v4.15.
The r8a7791 patch did not apply cleanly for some reason.
Could you rebase and repost once I have pushed today's devel branch?
^ permalink raw reply [flat|nested] 6+ messages in thread