From: Yong Wu <yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
To: Joerg Roedel <joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Matthias Brugger
<matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Robin Murphy <robin.murphy-5wv7dgnIgG8@public.gmane.org>
Cc: k.zhang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>,
Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Tomasz Figa <tfiga-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org,
Daniel Kurtz <djkurtz-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
cloud.zhou-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org
Subject: [PATCH v2 1/8] dt-bindings: mediatek: Add binding for mt2712 IOMMU and SMI
Date: Mon, 21 Aug 2017 19:00:14 +0800 [thread overview]
Message-ID: <1503313221-26453-2-git-send-email-yong.wu@mediatek.com> (raw)
In-Reply-To: <1503313221-26453-1-git-send-email-yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
This patch adds decriptions for mt2712 IOMMU and SMI.
In order to balance the bandwidth, mt2712 has two M4Us, two
smi-commons, 10 smi-larbs. and mt2712 is also MTK IOMMU gen2 which
uses ARM Short-Descriptor translation table format.
The mt2712 M4U-SMI HW diagram is as below:
EMI
|
------------------------------------
| |
M4U0 M4U1
| |
smi-common0 smi-common1
| |
------------------------- --------------------------------
| | | | | | | | | |
| | | | | | | | | |
larb0 larb1 larb2 larb3 larb6 larb4 larb5 larb7 larb8 larb9
disp0 vdec cam venc jpg mdp1/disp1 mdp2/disp2 mdp3 vdo/nr tvd
All the connections are HW fixed, SW can NOT adjust it.
Signed-off-by: Yong Wu <yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
Hi Rob,
Comparing with the v1, I add larb8 and larb9 in this version.
So I don't add your ACK here.
---
.../devicetree/bindings/iommu/mediatek,iommu.txt | 6 +-
.../memory-controllers/mediatek,smi-common.txt | 6 +-
.../memory-controllers/mediatek,smi-larb.txt | 5 +-
include/dt-bindings/memory/mt2712-larb-port.h | 102 +++++++++++++++++++++
4 files changed, 113 insertions(+), 6 deletions(-)
create mode 100644 include/dt-bindings/memory/mt2712-larb-port.h
diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
index 53c20ca..df5db73 100644
--- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
@@ -40,6 +40,7 @@ video decode local arbiter, all these ports are according to the video HW.
Required properties:
- compatible : must be one of the following string:
"mediatek,mt2701-m4u" for mt2701 which uses generation one m4u HW.
+ "mediatek,mt2712-m4u" for mt2712 which uses generation two m4u HW.
"mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW.
- reg : m4u register base and size.
- interrupts : the interrupt of m4u.
@@ -50,8 +51,9 @@ Required properties:
according to the local arbiter index, like larb0, larb1, larb2...
- iommu-cells : must be 1. This is the mtk_m4u_id according to the HW.
Specifies the mtk_m4u_id as defined in
- dt-binding/memory/mt2701-larb-port.h for mt2701 and
- dt-binding/memory/mt8173-larb-port.h for mt8173
+ dt-binding/memory/mt2701-larb-port.h for mt2701,
+ dt-binding/memory/mt2712-larb-port.h for mt2712, and
+ dt-binding/memory/mt8173-larb-port.h for mt8173.
Example:
iommu: iommu@10205000 {
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
index aa614b2..615abdd 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
@@ -2,8 +2,9 @@ SMI (Smart Multimedia Interface) Common
The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
-Mediatek SMI have two generations of HW architecture, mt8173 uses the second
-generation of SMI HW while mt2701 uses the first generation HW of SMI.
+Mediatek SMI have two generations of HW architecture, mt2712 and mt8173 use
+the second generation of SMI HW while mt2701 uses the first generation HW of
+SMI.
There's slight differences between the two SMI, for generation 2, the
register which control the iommu port is at each larb's register base. But
@@ -15,6 +16,7 @@ not needed for SMI generation 2.
Required properties:
- compatible : must be one of :
"mediatek,mt2701-smi-common"
+ "mediatek,mt2712-smi-common"
"mediatek,mt8173-smi-common"
- reg : the register and size of the SMI block.
- power-domains : a phandle to the power domain of this local arbiter.
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
index ddf46b8..083155c 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
@@ -4,8 +4,9 @@ The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
Required properties:
- compatible : must be one of :
- "mediatek,mt8173-smi-larb"
"mediatek,mt2701-smi-larb"
+ "mediatek,mt2712-smi-larb"
+ "mediatek,mt8173-smi-larb"
- reg : the register and size of this local arbiter.
- mediatek,smi : a phandle to the smi_common node.
- power-domains : a phandle to the power domain of this local arbiter.
@@ -15,7 +16,7 @@ Required properties:
the register.
- "smi" : It's the clock for transfer data and command.
-Required property for mt2701:
+Required property for mt2701 and mt2712:
- mediatek,larb-id :the hardware id of this larb.
Example:
diff --git a/include/dt-bindings/memory/mt2712-larb-port.h b/include/dt-bindings/memory/mt2712-larb-port.h
new file mode 100644
index 0000000..6b3a9e3
--- /dev/null
+++ b/include/dt-bindings/memory/mt2712-larb-port.h
@@ -0,0 +1,102 @@
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Yong Wu <yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DTS_IOMMU_PORT_MT2712_H
+#define __DTS_IOMMU_PORT_MT2712_H
+
+#define MTK_M4U_ID(larb, port) (((larb) << 5) | (port))
+
+#define M4U_LARB0_ID 0
+#define M4U_LARB1_ID 1
+#define M4U_LARB2_ID 2
+#define M4U_LARB3_ID 3
+#define M4U_LARB4_ID 4
+#define M4U_LARB5_ID 5
+#define M4U_LARB6_ID 6
+#define M4U_LARB7_ID 7
+#define M4U_LARB8_ID 8
+#define M4U_LARB9_ID 9
+
+/* larb0 */
+#define M4U_PORT_DISP_OVL0 MTK_M4U_ID(M4U_LARB0_ID, 0)
+#define M4U_PORT_DISP_RDMA0 MTK_M4U_ID(M4U_LARB0_ID, 1)
+#define M4U_PORT_DISP_WDMA0 MTK_M4U_ID(M4U_LARB0_ID, 2)
+#define M4U_PORT_DISP_OD_R MTK_M4U_ID(M4U_LARB0_ID, 3)
+#define M4U_PORT_DISP_OD_W MTK_M4U_ID(M4U_LARB0_ID, 4)
+#define M4U_PORT_MDP_RDMA0 MTK_M4U_ID(M4U_LARB0_ID, 5)
+#define M4U_PORT_MDP_WDMA MTK_M4U_ID(M4U_LARB0_ID, 6)
+
+/* larb1 */
+#define M4U_PORT_HW_VDEC_MC_EXT MTK_M4U_ID(M4U_LARB1_ID, 0)
+#define M4U_PORT_HW_VDEC_PP_EXT MTK_M4U_ID(M4U_LARB1_ID, 1)
+#define M4U_PORT_HW_VDEC_UFO_EXT MTK_M4U_ID(M4U_LARB1_ID, 2)
+#define M4U_PORT_HW_VDEC_VLD_EXT MTK_M4U_ID(M4U_LARB1_ID, 3)
+#define M4U_PORT_HW_VDEC_VLD2_EXT MTK_M4U_ID(M4U_LARB1_ID, 4)
+#define M4U_PORT_HW_VDEC_AVC_MV_EXT MTK_M4U_ID(M4U_LARB1_ID, 5)
+#define M4U_PORT_HW_VDEC_PRED_RD_EXT MTK_M4U_ID(M4U_LARB1_ID, 6)
+#define M4U_PORT_HW_VDEC_PRED_WR_EXT MTK_M4U_ID(M4U_LARB1_ID, 7)
+#define M4U_PORT_HW_VDEC_PPWRAP_EXT MTK_M4U_ID(M4U_LARB1_ID, 8)
+#define M4U_PORT_HW_VDEC_TILE MTK_M4U_ID(M4U_LARB1_ID, 9)
+#define M4U_PORT_HW_IMG_RESZ_EXT MTK_M4U_ID(M4U_LARB1_ID, 10)
+
+/* larb2 */
+#define M4U_PORT_CAM_DMA0 MTK_M4U_ID(M4U_LARB2_ID, 0)
+#define M4U_PORT_CAM_DMA1 MTK_M4U_ID(M4U_LARB2_ID, 1)
+#define M4U_PORT_CAM_DMA2 MTK_M4U_ID(M4U_LARB2_ID, 2)
+
+/* larb3 */
+#define M4U_PORT_VENC_RCPU MTK_M4U_ID(M4U_LARB3_ID, 0)
+#define M4U_PORT_VENC_REC MTK_M4U_ID(M4U_LARB3_ID, 1)
+#define M4U_PORT_VENC_BSDMA MTK_M4U_ID(M4U_LARB3_ID, 2)
+#define M4U_PORT_VENC_SV_COMV MTK_M4U_ID(M4U_LARB3_ID, 3)
+#define M4U_PORT_VENC_RD_COMV MTK_M4U_ID(M4U_LARB3_ID, 4)
+#define M4U_PORT_VENC_CUR_CHROMA MTK_M4U_ID(M4U_LARB3_ID, 5)
+#define M4U_PORT_VENC_REF_CHROMA MTK_M4U_ID(M4U_LARB3_ID, 6)
+#define M4U_PORT_VENC_CUR_LUMA MTK_M4U_ID(M4U_LARB3_ID, 7)
+#define M4U_PORT_VENC_REF_LUMA MTK_M4U_ID(M4U_LARB3_ID, 8)
+
+/* larb4 */
+#define M4U_PORT_DISP_OVL1 MTK_M4U_ID(M4U_LARB4_ID, 0)
+#define M4U_PORT_DISP_RDMA1 MTK_M4U_ID(M4U_LARB4_ID, 1)
+#define M4U_PORT_DISP_WDMA1 MTK_M4U_ID(M4U_LARB4_ID, 2)
+#define M4U_PORT_DISP_OD1_R MTK_M4U_ID(M4U_LARB4_ID, 3)
+#define M4U_PORT_DISP_OD1_W MTK_M4U_ID(M4U_LARB4_ID, 4)
+#define M4U_PORT_MDP_RDMA1 MTK_M4U_ID(M4U_LARB4_ID, 5)
+#define M4U_PORT_MDP_WROT1 MTK_M4U_ID(M4U_LARB4_ID, 6)
+
+/* larb5 */
+#define M4U_PORT_DISP_OVL2 MTK_M4U_ID(M4U_LARB5_ID, 0)
+#define M4U_PORT_DISP_WDMA2 MTK_M4U_ID(M4U_LARB5_ID, 1)
+#define M4U_PORT_MDP_RDMA2 MTK_M4U_ID(M4U_LARB5_ID, 2)
+#define M4U_PORT_MDP_WROT0 MTK_M4U_ID(M4U_LARB5_ID, 3)
+
+/* larb6 */
+#define M4U_PORT_JPGDEC_WDMA_0 MTK_M4U_ID(M4U_LARB6_ID, 0)
+#define M4U_PORT_JPGDEC_WDMA_1 MTK_M4U_ID(M4U_LARB6_ID, 1)
+#define M4U_PORT_JPGDEC_BSDMA_0 MTK_M4U_ID(M4U_LARB6_ID, 2)
+#define M4U_PORT_JPGDEC_BSDMA_1 MTK_M4U_ID(M4U_LARB6_ID, 3)
+
+/* larb7 */
+#define M4U_PORT_MDP_RDMA3 MTK_M4U_ID(M4U_LARB7_ID, 0)
+#define M4U_PORT_MDP_WROT2 MTK_M4U_ID(M4U_LARB7_ID, 1)
+
+/* larb8 */
+#define M4U_PORT_VDO MTK_M4U_ID(M4U_LARB8_ID, 0)
+#define M4U_PORT_NR MTK_M4U_ID(M4U_LARB8_ID, 1)
+#define M4U_PORT_WR_CHANNEL0 MTK_M4U_ID(M4U_LARB8_ID, 2)
+
+/* larb9 */
+#define M4U_PORT_TVD MTK_M4U_ID(M4U_LARB9_ID, 0)
+#define M4U_PORT_WR_CHANNEL1 MTK_M4U_ID(M4U_LARB9_ID, 1)
+
+#endif
--
1.9.1
next prev parent reply other threads:[~2017-08-21 11:00 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-21 11:00 [PATCH v2 0/8] MT2712 IOMMU SUPPORT Yong Wu
2017-08-21 11:00 ` [PATCH v2 3/8] iommu/mediatek: Add mt2712 IOMMU support Yong Wu
[not found] ` <1503313221-26453-1-git-send-email-yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-08-21 11:00 ` Yong Wu [this message]
[not found] ` <1503313221-26453-2-git-send-email-yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-08-21 23:33 ` [PATCH v2 1/8] dt-bindings: mediatek: Add binding for mt2712 IOMMU and SMI Rob Herring
2017-08-21 11:00 ` [PATCH v2 2/8] iommu/mediatek: Move MTK_M4U_TO_LARB/PORT into mtk_iommu.c Yong Wu
2017-08-21 11:00 ` [PATCH v2 4/8] iommu/mediatek: Merge 2 M4U HWs into one iommu domain Yong Wu
2017-08-21 11:00 ` [PATCH v2 5/8] iommu/mediatek: Move pgtable allocation into domain_alloc Yong Wu
2017-08-21 11:00 ` [PATCH v2 6/8] iommu/mediatek: Disable iommu clock when system suspend Yong Wu
2017-08-21 11:00 ` [PATCH v2 7/8] iommu/mediatek: Enlarge the validate PA range for 4GB mode Yong Wu
[not found] ` <1503313221-26453-8-git-send-email-yong.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-08-23 17:55 ` kbuild test robot
2017-08-24 6:15 ` kbuild test robot
2017-08-21 11:00 ` [PATCH v2 8/8] memory: mtk-smi: Degrade SMI init to module_init Yong Wu
2017-08-22 14:38 ` [PATCH v2 0/8] MT2712 IOMMU SUPPORT Joerg Roedel
[not found] ` <20170822143836.ac3faa7wcwfjtvjc-zLv9SwRftAIdnm+yROfE0A@public.gmane.org>
2017-09-06 5:40 ` Yong Wu
2017-10-20 10:12 ` Yong Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1503313221-26453-2-git-send-email-yong.wu@mediatek.com \
--to=yong.wu-nus5lvnupcjwk0htik3j/w@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=cloud.zhou-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=djkurtz-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA@public.gmane.org \
--cc=joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org \
--cc=k.zhang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=robin.murphy-5wv7dgnIgG8@public.gmane.org \
--cc=srv_heupstream-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=tfiga-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).