devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Phil Reid <preid@electromag.com.au>
To: wsa@the-dreams.de, robh+dt@kernel.org, mark.rutland@arm.com,
	sre@kernel.org, jdelvare@suse.com, jglauber@cavium.com,
	david.daney@cavium.com, peda@axentia.se, preid@electromag.com.au,
	benjamin.tissoires@redhat.com, linux-i2c@vger.kernel.org,
	devicetree@vger.kernel.org, linux-pm@vger.kernel.org
Subject: [PATCH v11 05/10] i2c: mux: pca954x: call request irq after adding mux segments
Date: Thu, 24 Aug 2017 17:31:05 +0800	[thread overview]
Message-ID: <1503567070-115646-6-git-send-email-preid@electromag.com.au> (raw)
In-Reply-To: <1503567070-115646-1-git-send-email-preid@electromag.com.au>

The pca954x device do not have the ability to mask interrupts. For
i2c slave devices that also don't have masking ability (eg ltc1760
smbalert output) delay registering the irq until after the mux
segments have been configured. During the mux add_adaptor call the
core i2c system can register an smbalert handler which would then
be called immediately when the irq is registered. This smbalert
handler will then clear the pending irq.

This removes the need for the irq_mask / irq_unmask calls that were
original used to do this.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Acked-by: Peter Rosin <peda@axentia.se>
---
 drivers/i2c/muxes/i2c-mux-pca954x.c | 91 ++++++++++++-------------------------
 1 file changed, 28 insertions(+), 63 deletions(-)

diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index f1751c2..5ec5020 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -246,36 +246,6 @@ static irqreturn_t pca954x_irq_handler(int irq, void *dev_id)
 	return handled ? IRQ_HANDLED : IRQ_NONE;
 }
 
-static void pca954x_irq_mask(struct irq_data *idata)
-{
-	struct pca954x *data = irq_data_get_irq_chip_data(idata);
-	unsigned int pos = idata->hwirq;
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&data->lock, flags);
-
-	data->irq_mask &= ~BIT(pos);
-	if (!data->irq_mask)
-		disable_irq(data->client->irq);
-
-	raw_spin_unlock_irqrestore(&data->lock, flags);
-}
-
-static void pca954x_irq_unmask(struct irq_data *idata)
-{
-	struct pca954x *data = irq_data_get_irq_chip_data(idata);
-	unsigned int pos = idata->hwirq;
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&data->lock, flags);
-
-	if (!data->irq_mask)
-		enable_irq(data->client->irq);
-	data->irq_mask |= BIT(pos);
-
-	raw_spin_unlock_irqrestore(&data->lock, flags);
-}
-
 static int pca954x_irq_set_type(struct irq_data *idata, unsigned int type)
 {
 	if ((type & IRQ_TYPE_SENSE_MASK) != IRQ_TYPE_LEVEL_LOW)
@@ -285,8 +255,6 @@ static int pca954x_irq_set_type(struct irq_data *idata, unsigned int type)
 
 static struct irq_chip pca954x_irq_chip = {
 	.name = "i2c-mux-pca954x",
-	.irq_mask = pca954x_irq_mask,
-	.irq_unmask = pca954x_irq_unmask,
 	.irq_set_type = pca954x_irq_set_type,
 };
 
@@ -294,7 +262,7 @@ static int pca954x_irq_setup(struct i2c_mux_core *muxc)
 {
 	struct pca954x *data = i2c_mux_priv(muxc);
 	struct i2c_client *client = data->client;
-	int c, err, irq;
+	int c, irq;
 
 	if (!data->chip->has_irq || client->irq <= 0)
 		return 0;
@@ -314,24 +282,22 @@ static int pca954x_irq_setup(struct i2c_mux_core *muxc)
 			handle_simple_irq);
 	}
 
-	err = devm_request_threaded_irq(&client->dev, data->client->irq, NULL,
-					pca954x_irq_handler,
-					IRQF_ONESHOT | IRQF_SHARED,
-					"pca954x", data);
-	if (err)
-		goto err_req_irq;
+	return 0;
+}
 
-	disable_irq(data->client->irq);
+static void pca954x_cleanup(struct i2c_mux_core *muxc)
+{
+	struct pca954x *data = i2c_mux_priv(muxc);
+	int c, irq;
 
-	return 0;
-err_req_irq:
-	for (c = 0; c < data->chip->nchans; c++) {
-		irq = irq_find_mapping(data->irq, c);
-		irq_dispose_mapping(irq);
+	if (data->irq) {
+		for (c = 0; c < data->chip->nchans; c++) {
+			irq = irq_find_mapping(data->irq, c);
+			irq_dispose_mapping(irq);
+		}
+		irq_domain_remove(data->irq);
 	}
-	irq_domain_remove(data->irq);
-
-	return err;
+	i2c_mux_del_adapters(muxc);
 }
 
 /*
@@ -391,7 +357,7 @@ static int pca954x_probe(struct i2c_client *client,
 
 	ret = pca954x_irq_setup(muxc);
 	if (ret)
-		goto fail_del_adapters;
+		goto fail_cleanup;
 
 	/* Now create an adapter for each channel */
 	for (num = 0; num < data->chip->nchans; num++) {
@@ -414,7 +380,16 @@ static int pca954x_probe(struct i2c_client *client,
 
 		ret = i2c_mux_add_adapter(muxc, force, num, class);
 		if (ret)
-			goto fail_del_adapters;
+			goto fail_cleanup;
+	}
+
+	if (data->irq) {
+		ret = devm_request_threaded_irq(&client->dev, data->client->irq,
+						NULL, pca954x_irq_handler,
+						IRQF_ONESHOT | IRQF_SHARED,
+						"pca954x", data);
+		if (ret)
+			goto fail_cleanup;
 	}
 
 	dev_info(&client->dev,
@@ -424,26 +399,16 @@ static int pca954x_probe(struct i2c_client *client,
 
 	return 0;
 
-fail_del_adapters:
-	i2c_mux_del_adapters(muxc);
+fail_cleanup:
+	pca954x_cleanup(muxc);
 	return ret;
 }
 
 static int pca954x_remove(struct i2c_client *client)
 {
 	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
-	struct pca954x *data = i2c_mux_priv(muxc);
-	int c, irq;
 
-	if (data->irq) {
-		for (c = 0; c < data->chip->nchans; c++) {
-			irq = irq_find_mapping(data->irq, c);
-			irq_dispose_mapping(irq);
-		}
-		irq_domain_remove(data->irq);
-	}
-
-	i2c_mux_del_adapters(muxc);
+	pca954x_cleanup(muxc);
 	return 0;
 }
 
-- 
1.8.3.1

  parent reply	other threads:[~2017-08-24  9:31 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-24  9:31 [PATCH v11 00/10] Add sbs-manager with smbalert support Phil Reid
2017-08-24  9:31 ` [PATCH v11 01/10] i2c: i2c-smbus: Use threaded irq for smbalert Phil Reid
2017-08-24  9:31 ` [PATCH v11 03/10] i2c: i2c-smbus: add of_i2c_setup_smbus_alert Phil Reid
2017-08-24  9:31 ` Phil Reid [this message]
2017-08-24  9:31 ` [PATCH v11 07/10] Documentation: Add sbs-manager device tree node documentation Phil Reid
     [not found] ` <1503567070-115646-1-git-send-email-preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org>
2017-08-24  9:31   ` [PATCH v11 02/10] i2c: i2c-smbus: Move i2c_setup_smbus_alert from i2c-smbus to i2c-core-smbus Phil Reid
     [not found]     ` <1503567070-115646-3-git-send-email-preid-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org>
2017-10-29 15:44       ` Wolfram Sang
2017-10-30  4:23         ` Phil Reid
     [not found]           ` <1397131b-c22d-9872-dbe0-9b691553cb9e-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org>
2017-11-06 21:36             ` Wolfram Sang
2017-11-07  1:16               ` Phil Reid
2017-11-07  7:22                 ` Wolfram Sang
2017-11-17 12:15                   ` Phil Reid
2017-08-24  9:31   ` [PATCH v11 04/10] i2c: core: call of_i2c_setup_smbus_alert in i2c_register_adapter Phil Reid
2017-08-24  9:31   ` [PATCH v11 06/10] i2c: mux: pca954x: Return error if irq_create_mapping fails Phil Reid
2017-08-24  9:31   ` [PATCH v11 08/10] power: Adds support for Smart Battery System Manager Phil Reid
2017-08-24  9:31 ` [PATCH v11 09/10] power: supply: sbs-manager: Add alert callback and battery change notification Phil Reid
2017-08-24  9:31 ` [PATCH v11 10/10] power: supply: sbs-battery: move gpio present detect to sbs_get_property Phil Reid
2017-09-28  7:38 ` [PATCH v11 00/10] Add sbs-manager with smbalert support Phil Reid
     [not found]   ` <66235a12-a209-be89-5bfd-dc69b769cab9-qgqNFa1JUf/o2iN0hyhwsIdd74u8MsAO@public.gmane.org>
2017-10-28 22:55     ` Wolfram Sang
2017-10-29 14:37       ` Sebastian Reichel
2017-10-29 15:05         ` Wolfram Sang
2017-11-01 22:52       ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1503567070-115646-6-git-send-email-preid@electromag.com.au \
    --to=preid@electromag.com.au \
    --cc=benjamin.tissoires@redhat.com \
    --cc=david.daney@cavium.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=jglauber@cavium.com \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=peda@axentia.se \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).