From mboxrd@z Thu Jan 1 00:00:00 1970 From: Oza Pawandeep Subject: [PATCH v5 2/3] dt-bindings: PCI iproc: Implement optional property prsnt-gpios Date: Thu, 31 Aug 2017 10:14:29 +0530 Message-ID: <1504154670-24608-3-git-send-email-oza.oza@broadcom.com> References: <1504154670-24608-1-git-send-email-oza.oza@broadcom.com> Return-path: In-Reply-To: <1504154670-24608-1-git-send-email-oza.oza@broadcom.com> Sender: linux-kernel-owner@vger.kernel.org To: Bjorn Helgaas , helgaas@kernel.org, Rob Herring , Mark Rutland , Ray Jui , Scott Branden , Jon Mason , bcm-kernel-feedback-list@broadcom.com, Oza Pawandeep , Andy Gospodarek , linux-pci@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Oza Pawandeep List-Id: devicetree@vger.kernel.org Add description for optional device tree property 'prsnt-gpios' for PCI hotplug feature. Signed-off-by: Oza Pawandeep Reviewed-by: Ray Jui Acked-by: Rob Herring diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt index b8e48b4..0c5f631 100644 --- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt +++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt @@ -72,6 +72,20 @@ Optional properties: - brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that require the interrupt enable registers to be set explicitly to enable MSI +Optional properties: +- slot-pluggable: PCI hotplug feature is supported. +- prsnt-gpios: Array of gpios, needs to be present if Hotplug is supported. + +Refer to the following binding documents for more detailed description on +the use of 'slot-pluggable' and 'prsnt-gpios'. + Documentation/devicetree/bindings/pci/pci.txt + +Example: +prsnt-gpios: <&pca9505 32 1>, <&pca9505 33 1>; +This is x4 connector: monitoring max 2 present lines. +prsnt-gpios: <&pca9505 32 1>, <&pca9505 33 1>, <&pca9505 34 1>; +This is x8 connector: monitoring max 3 present lines. + Example: pcie0: pcie@18012000 { compatible = "brcm,iproc-pcie"; -- 1.9.1