From: CK Hu <ck.hu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
To: Ryder Lee <ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Cc: Matthias Brugger
<matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Linus Walleij
<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH v1 3/4] arm: dts: mt7623: add display related nodes
Date: Wed, 20 Sep 2017 09:11:37 +0800 [thread overview]
Message-ID: <1505869897.27600.6.camel@mtksdaap41> (raw)
In-Reply-To: <0eb19ae1a4717d316cdaec44f6c20bfa8aa24ddc.1505801355.git.ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Hi, Ryder:
Mode comment inline.
On Tue, 2017-09-19 at 14:27 +0800, Ryder Lee wrote:
> This patch adds the device nodes for the display function block.
> Also, we add some missing pin macros in mt7623-pinfunc.h.
>
> Signed-off-by: Ryder Lee <ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
> CC: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Acked-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
> arch/arm/boot/dts/mt7623.dtsi | 210 ++++++++++++++++++++++++++
> arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 41 ++++-
> include/dt-bindings/pinctrl/mt7623-pinfunc.h | 12 ++
> 3 files changed, 261 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index 9ec3767..e11e5e7 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -20,6 +20,7 @@
> #include <dt-bindings/power/mt2701-power.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/memory/mt2701-larb-port.h>
> #include <dt-bindings/reset/mt2701-resets.h>
> #include <dt-bindings/thermal/thermal.h>
> #include "skeleton64.dtsi"
> @@ -28,6 +29,11 @@
> compatible = "mediatek,mt7623";
> interrupt-parent = <&sysirq>;
>
> + aliases {
> + rdma0 = &rdma0;
> + rdma1 = &rdma1;
> + };
> +
> cpu_opp_table: opp_table {
> compatible = "operating-points-v2";
> opp-shared;
> @@ -273,6 +279,17 @@
> <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + smi_common: smi@1000c000 {
> + compatible = "mediatek,mt7623-smi-common",
> + "mediatek,mt2701-smi-common";
> + reg = <0 0x1000c000 0 0x1000>;
> + clocks = <&infracfg CLK_INFRA_SMI>,
> + <&mmsys CLK_MM_SMI_COMMON>,
> + <&infracfg CLK_INFRA_SMI>;
> + clock-names = "apb", "smi", "async";
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> + };
> +
> pwrap: pwrap@1000d000 {
> compatible = "mediatek,mt7623-pwrap",
> "mediatek,mt2701-pwrap";
> @@ -286,6 +303,17 @@
> clock-names = "spi", "wrap";
> };
>
> + mipi_tx0: mipi-dphy@10010000 {
> + compatible = "mediatek,mt7623-mipi-tx",
> + "mediatek,mt2701-mipi-tx";
> + reg = <0 0x10010000 0 0x90>;
> + clocks = <&clk26m>;
> + clock-output-names = "mipi_tx0_pll";
> + #clock-cells = <0>;
> + #phy-cells = <0>;
> + status = "disabled";
> + };
> +
> cir: cir@10013000 {
> compatible = "mediatek,mt7623-cir";
> reg = <0 0x10013000 0 0x1000>;
> @@ -304,6 +332,17 @@
> reg = <0 0x10200100 0 0x1c>;
> };
>
> + iommu: mmsys_iommu@10205000 {
> + compatible = "mediatek,mt7623-m4u",
> + "mediatek,mt2701-m4u";
> + reg = <0 0x10205000 0 0x1000>;
> + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&infracfg CLK_INFRA_M4U>;
> + clock-names = "bclk";
> + mediatek,larbs = <&larb0 &larb1 &larb2>;
> + #iommu-cells = <1>;
> + };
> +
> efuse: efuse@10206000 {
> compatible = "mediatek,mt7623-efuse",
> "mediatek,mt8173-efuse";
> @@ -661,6 +700,169 @@
> status = "disabled";
> };
>
> + mmsys: syscon@14000000 {
> + compatible = "mediatek,mt7623-mmsys",
> + "mediatek,mt2701-mmsys",
> + "syscon";
> + reg = <0 0x14000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + display_components: dispsys@14000000 {
> + compatible = "mediatek,mt7623-mmsys",
> + "mediatek,mt2701-mmsys";
> + reg = <0 0x14000000 0 0x1000>;
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> + };
> +
> + ovl@14007000 {
> + compatible = "mediatek,mt7623-disp-ovl",
> + "mediatek,mt2701-disp-ovl";
> + reg = <0 0x14007000 0 0x1000>;
> + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_OVL>;
> + iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
> + mediatek,larb = <&larb0>;
> + };
> +
> + rdma0: rdma@14008000 {
> + compatible = "mediatek,mt7623-disp-rdma",
> + "mediatek,mt2701-disp-rdma";
> + reg = <0 0x14008000 0 0x1000>;
> + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_RDMA>;
> + iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
> + mediatek,larb = <&larb0>;
> + };
> +
> + wdma@14009000 {
> + compatible = "mediatek,mt7623-disp-wdma",
> + "mediatek,mt2701-disp-wdma";
> + reg = <0 0x14009000 0 0x1000>;
> + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_WDMA>;
> + iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
> + mediatek,larb = <&larb0>;
> + };
> +
> + bls: bls@1400a000 {
> + compatible = "mediatek,mt7623-disp-pwm",
> + "mediatek,mt2701-disp-pwm";
> + reg = <0 0x1400a000 0 0x1000>;
> + #pwm-cells = <2>;
> + clocks = <&mmsys CLK_MM_MDP_BLS_26M>,
> + <&mmsys CLK_MM_DISP_BLS>;
> + clock-names = "main", "mm";
> + status = "disabled";
> + };
> +
> + color@1400b000 {
> + compatible = "mediatek,mt7623-disp-color",
> + "mediatek,mt2701-disp-color";
> + reg = <0 0x1400b000 0 0x1000>;
> + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_COLOR>;
> + };
> +
> + dsi: dsi@1400c000 {
> + compatible = "mediatek,mt7623-dsi",
> + "mediatek,mt2701-dsi";
> + reg = <0 0x1400c000 0 0x1000>;
> + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DSI_ENGINE>,
> + <&mmsys CLK_MM_DSI_DIG>,
> + <&mipi_tx0>;
> + clock-names = "engine", "digital", "hs";
> + phys = <&mipi_tx0>;
> + phy-names = "dphy";
> + status = "disabled";
> + };
> +
> + mutex: mutex@1400e000 {
> + compatible = "mediatek,mt7623-disp-mutex",
> + "mediatek,mt2701-disp-mutex";
> + reg = <0 0x1400e000 0 0x1000>;
> + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_MUTEX_32K>;
> + };
> +
> + larb0: larb@14010000 {
> + compatible = "mediatek,mt7623-smi-larb",
> + "mediatek,mt2701-smi-larb";
> + reg = <0 0x14010000 0 0x1000>;
> + mediatek,smi = <&smi_common>;
> + mediatek,larb-id = <0>;
> + clocks = <&mmsys CLK_MM_SMI_LARB0>,
> + <&mmsys CLK_MM_SMI_LARB0>;
> + clock-names = "apb", "smi";
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> + };
> +
> + rdma1: rdma@14012000 {
> + compatible = "mediatek,mt7623-disp-rdma",
> + "mediatek,mt2701-disp-rdma";
> + reg = <0 0x14012000 0 0x1000>;
> + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_RDMA1>;
> + iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
> + mediatek,larb = <&larb0>;
> + };
> +
> + imgsys: syscon@15000000 {
> + compatible = "mediatek,mt7623-imgsys",
> + "mediatek,mt2701-imgsys",
> + "syscon";
> + reg = <0 0x15000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + larb2: larb@15001000 {
> + compatible = "mediatek,mt7623-smi-larb",
> + "mediatek,mt2701-smi-larb";
> + reg = <0 0x15001000 0 0x1000>;
> + mediatek,smi = <&smi_common>;
> + mediatek,larb-id = <2>;
> + clocks = <&imgsys CLK_IMG_SMI_COMM>,
> + <&imgsys CLK_IMG_SMI_COMM>;
> + clock-names = "apb", "smi";
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
> + };
> +
> + jpegdec: jpegdec@15004000 {
> + compatible = "mediatek,mt7623-jpgdec",
> + "mediatek,mt2701-jpgdec";
> + reg = <0 0x15004000 0 0x1000>;
> + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
> + <&imgsys CLK_IMG_JPGDEC>;
> + clock-names = "jpgdec-smi",
> + "jpgdec";
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
> + mediatek,larb = <&larb2>;
> + iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
> + <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
> + };
jpegdec and some other device node is not related to display. I think
you should move them to another patch.
> +
> + vdecsys: syscon@16000000 {
> + compatible = "mediatek,mt7623-vdecsys",
> + "mediatek,mt2701-vdecsys",
> + "syscon";
> + reg = <0 0x16000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + larb1: larb@16010000 {
> + compatible = "mediatek,mt7623-smi-larb",
> + "mediatek,mt2701-smi-larb";
> + reg = <0 0x16010000 0 0x1000>;
> + mediatek,smi = <&smi_common>;
> + mediatek,larb-id = <1>;
> + clocks = <&vdecsys CLK_VDEC_CKGEN>,
> + <&vdecsys CLK_VDEC_LARB>;
> + clock-names = "apb", "smi";
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
> + };
> +
> hifsys: syscon@1a000000 {
> compatible = "mediatek,mt7623-hifsys",
> "mediatek,mt2701-hifsys",
> @@ -799,4 +1001,12 @@
> power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
> status = "disabled";
> };
> +
> + bdpsys: syscon@1c000000 {
> + compatible = "mediatek,mt7623-bdpsys",
> + "mediatek,mt2701-bdpsys",
> + "syscon";
> + reg = <0 0x1c000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> };
> diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> index 688a863..267a05a 100644
> --- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> +++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
> @@ -17,6 +17,17 @@
> serial2 = &uart2;
> };
>
> + backlight_lcd: backlight_lcd {
> + compatible = "pwm-backlight";
> + pwms = <&bls 0 100000>;
> + brightness-levels = <
> + 0 16 32 48 64 80 96 112
> + 128 144 160 176 192 208 224 240
> + 255
> + >;
> + default-brightness-level = <9>;
> + };
> +
I think this patch only for mt7623 common dtsi modification. This part
is just for bananapi-bpi-r2, so move non-common part to another patch.
> chosen {
> stdout-path = "serial2:115200n8";
> };
> @@ -86,6 +97,12 @@
> };
> };
>
> +&bls {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&bls_pins_a>;
> +};
> +
> &cir {
> pinctrl-names = "default";
> pinctrl-0 = <&cir_pins_a>;
> @@ -210,6 +227,12 @@
> };
>
> &pio {
> + bls_pins_a: bls@0 {
> + pins_cmd_dat {
> + pinmux = <MT7623_PIN_203_PWM0_FUNC_DISP_PWM>;
> + };
> + };
> +
> cir_pins_a:cir@0 {
> pins_cir {
> pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
> @@ -273,6 +296,21 @@
> };
> };
>
> + mipi_dsi_pin: mipi_dsi_pin {
> + pins_cmd_dat {
> + pinmux = <MT7623_PIN_100_MIPI_TDP0_FUNC_TDP0>,
> + <MT7623_PIN_99_MIPI_TDN0_FUNC_TDN0>,
> + <MT7623_PIN_98_MIPI_TDP1_FUNC_TDP1>,
> + <MT7623_PIN_97_MIPI_TDN1_FUNC_TDN1>,
> + <MT7623_PIN_96_MIPI_TCP_FUNC_TCP>,
> + <MT7623_PIN_95_MIPI_TCN_FUNC_TCN>,
> + <MT7623_PIN_94_MIPI_TDP2_FUNC_TDP2>,
> + <MT7623_PIN_93_MIPI_TDN2_FUNC_TDN2>,
> + <MT7623_PIN_92_MIPI_TDP3_FUNC_TDP3>,
> + <MT7623_PIN_91_MIPI_TDN3_FUNC_TDN3>;
> + };
> + };
> +
> mmc0_pins_default: mmc0default {
> pins_cmd_dat {
> pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
> @@ -378,8 +416,7 @@
>
> pwm_pins_a: pwm@0 {
> pins_pwm {
> - pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
> - <MT7623_PIN_204_PWM1_FUNC_PWM1>,
> + pinmux = <MT7623_PIN_204_PWM1_FUNC_PWM1>,
> <MT7623_PIN_205_PWM2_FUNC_PWM2>,
> <MT7623_PIN_206_PWM3_FUNC_PWM3>,
> <MT7623_PIN_207_PWM4_FUNC_PWM4>;
> diff --git a/include/dt-bindings/pinctrl/mt7623-pinfunc.h b/include/dt-bindings/pinctrl/mt7623-pinfunc.h
> index 436a87b..72bed67 100644
> --- a/include/dt-bindings/pinctrl/mt7623-pinfunc.h
> +++ b/include/dt-bindings/pinctrl/mt7623-pinfunc.h
> @@ -272,6 +272,18 @@
> #define MT7623_PIN_84_DSI_TE_FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
> #define MT7623_PIN_84_DSI_TE_FUNC_DSI_TE (MTK_PIN_NO(84) | 1)
>
> +#define MT7623_PIN_91_MIPI_TDN3_FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
> +#define MT7623_PIN_91_MIPI_TDN3_FUNC_TDN3 (MTK_PIN_NO(91) | 1)
> +
> +#define MT7623_PIN_92_MIPI_TDP3_FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
> +#define MT7623_PIN_92_MIPI_TDP3_FUNC_TDP3 (MTK_PIN_NO(92) | 1)
> +
> +#define MT7623_PIN_93_MIPI_TDN2_FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
> +#define MT7623_PIN_93_MIPI_TDN2_FUNC_TDN2 (MTK_PIN_NO(93) | 1)
> +
> +#define MT7623_PIN_94_MIPI_TDP2_FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
> +#define MT7623_PIN_94_MIPI_TDP2_FUNC_TDP2 (MTK_PIN_NO(94) | 1)
> +
> #define MT7623_PIN_95_MIPI_TCN_FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
> #define MT7623_PIN_95_MIPI_TCN_FUNC_TCN (MTK_PIN_NO(95) | 1)
>
Regards,
CK
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-09-20 1:11 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-19 6:27 [PATCH v1 0/4] update MT7623 and MT2701 dts Ryder Lee
2017-09-19 6:27 ` [PATCH v1 2/4] arm: dts: mt7623: update pio, usb and crypto nodes Ryder Lee
[not found] ` <cover.1505801355.git.ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-09-19 6:27 ` [PATCH v1 1/4] arm: dts: mediatek: update audio node for mt2701 and mt7623 Ryder Lee
2017-09-19 6:27 ` [PATCH v1 3/4] arm: dts: mt7623: add display related nodes Ryder Lee
[not found] ` <0eb19ae1a4717d316cdaec44f6c20bfa8aa24ddc.1505801355.git.ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-09-19 15:26 ` CK Hu
2017-09-21 9:50 ` Ryder Lee
2017-09-20 1:11 ` CK Hu [this message]
2017-09-21 9:53 ` Ryder Lee
2017-09-19 6:27 ` [PATCH v1 4/4] arm: dts: mt7623: add PCIe " Ryder Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1505869897.27600.6.camel@mtksdaap41 \
--to=ck.hu-nus5lvnupcjwk0htik3j/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=ryder.lee-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).