From: Dinh Nguyen <dinguyen-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org
Cc: dinguyen-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
catalin.marinas-5wv7dgnIgG8@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 3/3] arm64: dts: stratix10: add reset property for various peripherals
Date: Thu, 21 Sep 2017 09:18:00 -0500 [thread overview]
Message-ID: <1506003480-22955-3-git-send-email-dinguyen@kernel.org> (raw)
In-Reply-To: <1506003480-22955-1-git-send-email-dinguyen-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Add reset property for emac, gpio, i2c, sdmmc, timers, and watchdog.
Signed-off-by: Dinh Nguyen <dinguyen-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 25 +++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 99e2afe..6804936 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -101,6 +101,8 @@
interrupts = <0 90 4>;
interrupt-names = "macirq";
mac-address = [00 00 00 00 00 00];
+ resets = <&rst EMAC0_RESET>;
+ reset-names = "stmmaceth";
status = "disabled";
};
@@ -110,6 +112,8 @@
interrupts = <0 91 4>;
interrupt-names = "macirq";
mac-address = [00 00 00 00 00 00];
+ resets = <&rst EMAC1_RESET>;
+ reset-names = "stmmaceth";
status = "disabled";
};
@@ -119,6 +123,8 @@
interrupts = <0 92 4>;
interrupt-names = "macirq";
mac-address = [00 00 00 00 00 00];
+ resets = <&rst EMAC2_RESET>;
+ reset-names = "stmmaceth";
status = "disabled";
};
@@ -127,6 +133,7 @@
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xffc03200 0x100>;
+ resets = <&rst GPIO0_RESET>;
status = "disabled";
porta: gpio-controller@0 {
@@ -146,6 +153,7 @@
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
reg = <0xffc03300 0x100>;
+ resets = <&rst GPIO1_RESET>;
status = "disabled";
portb: gpio-controller@0 {
@@ -166,6 +174,7 @@
compatible = "snps,designware-i2c";
reg = <0xffc02800 0x100>;
interrupts = <0 103 4>;
+ resets = <&rst I2C0_RESET>;
status = "disabled";
};
@@ -175,6 +184,7 @@
compatible = "snps,designware-i2c";
reg = <0xffc02900 0x100>;
interrupts = <0 104 4>;
+ resets = <&rst I2C1_RESET>;
status = "disabled";
};
@@ -184,6 +194,7 @@
compatible = "snps,designware-i2c";
reg = <0xffc02a00 0x100>;
interrupts = <0 105 4>;
+ resets = <&rst I2C2_RESET>;
status = "disabled";
};
@@ -193,6 +204,7 @@
compatible = "snps,designware-i2c";
reg = <0xffc02b00 0x100>;
interrupts = <0 106 4>;
+ resets = <&rst I2C3_RESET>;
status = "disabled";
};
@@ -202,6 +214,7 @@
compatible = "snps,designware-i2c";
reg = <0xffc02c00 0x100>;
interrupts = <0 107 4>;
+ resets = <&rst I2C4_RESET>;
status = "disabled";
};
@@ -212,6 +225,8 @@
reg = <0xff808000 0x1000>;
interrupts = <0 96 4>;
fifo-depth = <0x400>;
+ resets = <&rst SDMMC_RESET>;
+ reset-names = "reset";
status = "disabled";
};
@@ -293,6 +308,7 @@
interrupts = <0 108 4>;
reg-shift = <2>;
reg-io-width = <4>;
+ resets = <&rst UART0_RESET>;
status = "disabled";
};
@@ -302,6 +318,7 @@
interrupts = <0 109 4>;
reg-shift = <2>;
reg-io-width = <4>;
+ resets = <&rst UART1_RESET>;
status = "disabled";
};
@@ -317,6 +334,8 @@
interrupts = <0 93 4>;
phys = <&usbphy0>;
phy-names = "usb2-phy";
+ resets = <&rst USB0_RESET>;
+ reset-names = "dwc2";
status = "disabled";
};
@@ -326,6 +345,8 @@
interrupts = <0 94 4>;
phys = <&usbphy0>;
phy-names = "usb2-phy";
+ resets = <&rst USB1_RESET>;
+ reset-names = "dwc2";
status = "disabled";
};
@@ -333,6 +354,7 @@
compatible = "snps,dw-wdt";
reg = <0xffd00200 0x100>;
interrupts = <0 117 4>;
+ resets = <&rst WATCHDOG0_RESET>;
status = "disabled";
};
@@ -340,6 +362,7 @@
compatible = "snps,dw-wdt";
reg = <0xffd00300 0x100>;
interrupts = <0 118 4>;
+ resets = <&rst WATCHDOG1_RESET>;
status = "disabled";
};
@@ -347,6 +370,7 @@
compatible = "snps,dw-wdt";
reg = <0xffd00400 0x100>;
interrupts = <0 125 4>;
+ resets = <&rst WATCHDOG2_RESET>;
status = "disabled";
};
@@ -354,6 +378,7 @@
compatible = "snps,dw-wdt";
reg = <0xffd00500 0x100>;
interrupts = <0 126 4>;
+ resets = <&rst WATCHDOG3_RESET>;
status = "disabled";
};
};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2017-09-21 14:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-21 14:17 [PATCH 1/3] arm64: dts: stratix10: include the reset manager bindings Dinh Nguyen
[not found] ` <1506003480-22955-1-git-send-email-dinguyen-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2017-09-21 14:17 ` [PATCH 2/3] arm64: dts: stratix10: add the 'altr,modrst-off' property Dinh Nguyen
2017-09-21 14:18 ` Dinh Nguyen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1506003480-22955-3-git-send-email-dinguyen@kernel.org \
--to=dinguyen-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).