[PATCH v2 08/17] dt-bindings: phy-qcom-qusb2: Update binding for QUSB2 V2 version

[PATCH v2 08/17] dt-bindings: phy-qcom-qusb2: Update binding for QUSB2 V2 version

[Manu Gautam]

Update generic compatible string for QUSB2 V2 PHY. This will allow
all targets using QUSB2 V2 use same string.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
---
 Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
index aa0fcb0..42c9742 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
@@ -4,7 +4,10 @@ Qualcomm QUSB2 phy controller
 QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
 
 Required properties:
- - compatible: compatible list, contains "qcom,msm8996-qusb2-phy".
+ - compatible: compatible list, contains
+	       "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996,
+	       "qcom,qusb2-v2-phy" for QUSB2 V2 PHY.
+
  - reg: offset and length of the PHY register set.
  - #phy-cells: must be 0.
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v2 12/17] dt-bindings: phy-qcom-qmp: Update bindings for QMP V3 USB PHY

[Manu Gautam]

Update compatible string and clock names for QMP version V3
USB PHY.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
---
 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
index b6a9f2b..dcf1b8f 100644
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@@ -8,7 +8,8 @@ Required properties:
  - compatible: compatible list, contains:
 	       "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
 	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
-	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996.
+	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
+	       "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy.
 
  - reg: offset and length of register set for PHY's common serdes block.
 
@@ -25,10 +26,13 @@ Required properties:
  - clock-names: "cfg_ahb" for phy config clock,
 		"aux" for phy aux clock,
 		"ref" for 19.2 MHz ref clk,
+		"com_aux" for phy common block aux clock,
 		For "qcom,msm8996-qmp-pcie-phy" must contain:
 			"aux", "cfg_ahb", "ref".
 		For "qcom,msm8996-qmp-usb3-phy" must contain:
 			"aux", "cfg_ahb", "ref".
+		For "qcom,qmp-v3-usb3-phy" must contain:
+			"aux", "cfg_ahb", "ref", "com_aux".
 
  - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v2 08/17] dt-bindings: phy-qcom-qusb2: Update binding for QUSB2 V2 version

[Rob Herring]

On Wed, Sep 27, 2017 at 02:29:04PM +0530, Manu Gautam wrote:
> Update generic compatible string for QUSB2 V2 PHY. This will allow
> all targets using QUSB2 V2 use same string.
> 
> Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 12/17] dt-bindings: phy-qcom-qmp: Update bindings for QMP V3 USB PHY

[Rob Herring]

On Wed, Sep 27, 2017 at 02:29:08PM +0530, Manu Gautam wrote:
> Update compatible string and clock names for QMP version V3
> USB PHY.
> 
> Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> index b6a9f2b..dcf1b8f 100644
> --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> @@ -8,7 +8,8 @@ Required properties:
>   - compatible: compatible list, contains:
>  	       "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
>  	       "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
> -	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996.
> +	       "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996,
> +	       "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy.

This is fine, but you will still need an SoC specific compatible in 
addition to this.

Acked-by: Rob Herring <robh@kernel.org>

Rob