From mboxrd@z Thu Jan 1 00:00:00 1970 From: Geert Uytterhoeven Subject: [PATCH 1/4] dt-bindings: net: ravb: Document optional reset-gpios property Date: Thu, 28 Sep 2017 17:53:31 +0200 Message-ID: <1506614014-4398-2-git-send-email-geert+renesas@glider.be> References: <1506614014-4398-1-git-send-email-geert+renesas@glider.be> Return-path: In-Reply-To: <1506614014-4398-1-git-send-email-geert+renesas@glider.be> Sender: netdev-owner@vger.kernel.org To: "David S . Miller" , Simon Horman , Magnus Damm Cc: Sergei Shtylyov , Andrew Lunn , Florian Fainelli , =?UTF-8?q?Niklas=20S=C3=B6derlund?= , netdev@vger.kernel.org, linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org, Geert Uytterhoeven List-Id: devicetree@vger.kernel.org The optional "reset-gpios" property (part of the generic MDIO bus properties) lets us describe the GPIO used for resetting the Ethernet PHY. Signed-off-by: Geert Uytterhoeven --- Documentation/devicetree/bindings/net/renesas,ravb.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index c902261893b913f5..4a6ec1ba32d0bf16 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -52,6 +52,7 @@ Optional properties: AVB_LINK signal. - renesas,ether-link-active-low: boolean, specify when the AVB_LINK signal is active-low instead of normal active-high. +- reset-gpios: see mdio.txt in the same directory. Example: @@ -99,6 +100,7 @@ Example: pinctrl-0 = <ðer_pins>; pinctrl-names = "default"; renesas,no-ether-link; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; #address-cells = <1>; #size-cells = <0>; -- 2.7.4