From: Jerome Brunet <jbrunet@baylibre.com>
To: Neil Armstrong <narmstrong@baylibre.com>,
khilman@baylibre.com, carlo@caione.org
Cc: linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 0/2] ARM64: meson-gxm: Add support for Khadas VIM2
Date: Tue, 03 Oct 2017 17:46:03 +0200 [thread overview]
Message-ID: <1507045563.17300.180.camel@baylibre.com> (raw)
In-Reply-To: <1507044283-18476-1-git-send-email-narmstrong@baylibre.com>
On Tue, 2017-10-03 at 17:24 +0200, Neil Armstrong wrote:
> The Khadas VIM2 is a Single Board Computer, respin of the origin
> Khadas VIM board, using an Amlogic S912 SoC and more server oriented.
>
> It provides the same external connectors and header pinout, plus a SPI
> NOR Flash, a reprogrammable STM8S003 MCU, FPC Connector, Cooling FAN header
> and Pogo Pads Arrays.
>
> To eventually provide access to the SPI NOR flash, the eMMC DS pin must be
> configured as a different pincrl node to disable it's access from the MMC
> Controller. This first patch splits this emmc pins entry for GXBB and GXL.
>
> Depends on eMMC ARM64 DT patches from Jerome Brunet at [2]
>
> Changes since v1 at [1] :
> - Add acks from Martin and Rob
> - Cleanup external_phy node
> - Cleanup sd_emmc_a node
> - Rebased with eMMC ARM64 DT patches from Jerome Brunet at [2]
>
> [1] https://lkml.kernel.org/r/1505832820-3517-1-git-send-email-narmstrong@bayl
> ibre.com
> [2] https://lkml.kernel.org/r/20170831135226.19784-1-jbrunet@baylibre.com
>
> Neil Armstrong (2):
> ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins
> ARM64: dts: meson-gxm: Add support for Khadas VIM2
For the series:
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
>
> Documentation/devicetree/bindings/arm/amlogic.txt | 1 +
> arch/arm64/boot/dts/amlogic/Makefile | 1 +
> .../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 2 +-
> .../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 2 +-
> .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 2 +-
> .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 2 +-
> arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 2 +-
> .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 2 +-
> arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 10 +-
> .../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 2 +-
> .../dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 2 +-
> .../dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 2 +-
> .../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 2 +-
> arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 10 +-
> .../boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 399
> +++++++++++++++++++++
> .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 2 +-
> arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 2 +-
> 17 files changed, 429 insertions(+), 16 deletions(-)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
>
prev parent reply other threads:[~2017-10-03 15:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-03 15:24 [PATCH v2 0/2] ARM64: meson-gxm: Add support for Khadas VIM2 Neil Armstrong
[not found] ` <1507044283-18476-1-git-send-email-narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2017-10-03 15:24 ` [PATCH v2 1/2] ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins Neil Armstrong
2017-10-03 15:24 ` [PATCH v2 2/2] ARM64: dts: meson-gxm: Add support for Khadas VIM2 Neil Armstrong
2017-10-06 23:05 ` [PATCH v2 0/2] ARM64: " Kevin Hilman
2017-10-03 15:46 ` Jerome Brunet [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1507045563.17300.180.camel@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=carlo@caione.org \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).