Re: [PATCH 4/8] ARM: dts: aspeed-romulus: Add I2C devices

[Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 1728 bytes --]

On Thu, 2017-09-28 at 17:21 +0930, Joel Stanley wrote:
> Enable the buses that are in use and the devices that are attached.
> Currently that is just the battery backed RTC.
> 
> Some of these buses are for hotplugged cards, such as PCIe cards. Others
> do not yet have upstream drivers, so there are no devices attached.
> 
> Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
> ---
>  arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 54 ++++++++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
> index 1190fec1b5d0..f79c1d21c47f 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
> @@ -79,3 +79,57 @@
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_rmii1_default>;
>  };
> +
> +&i2c2 {
> +	status = "okay";
> +};
> +
> +&i2c3 {
> +	status = "okay";
> +};
> +
> +&i2c4 {
> +	status = "okay";
> +};
> +
> +&i2c5 {
> +	status = "okay";
> +};
> +
> +&i2c6 {
> +	/* PCIe slot 1 (x8) */
> +	status = "enabled";

This is not okay. Neither are those below.

Cheers,

Andrew

> +};
> +
> +&i2c7 {
> +	/* PCIe slot 2 (x16) */
> +	status = "enabled";
> +};
> +
> +&i2c8 {
> +	/* PCIe slot 3 (x16) */
> +	status = "enabled";
> +};
> +
> +&i2c9 {
> +	/* PCIe slot 4 (x16) */
> +	status = "enabled";
> +};
> +
> +&i2c10 {
> +	/* PCIe slot 5 (x8) */
> +	status = "enabled";
> +};
> +
> +&i2c11 {
> +	status = "okay";
> +
> +	rtc@32 {
> +		compatible = "epson,rx8900";
> +		reg = <0x32>;
> +	};
> +};
> +
> +&i2c12 {
> +	status = "okay";
> +};

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 801 bytes --]