* [PATCH] reset: uniphier: add PXs3 reset data
@ 2017-10-05 2:30 Masahiro Yamada
[not found] ` <1507170657-26432-1-git-send-email-yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
0 siblings, 1 reply; 2+ messages in thread
From: Masahiro Yamada @ 2017-10-05 2:30 UTC (permalink / raw)
To: Philipp Zabel
Cc: Masahiro Yamada, devicetree, linux-kernel, Rob Herring,
Mark Rutland, linux-arm-kernel
Add basic reset data for Socionext's new SoC PXs3.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
.../devicetree/bindings/reset/uniphier-reset.txt | 3 +++
drivers/reset/reset-uniphier.c | 26 ++++++++++++++++++++++
2 files changed, 29 insertions(+)
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
index 68a6f48..93efed6 100644
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -13,6 +13,7 @@ Required properties:
"socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC
"socionext,uniphier-ld11-reset" - for LD11 SoC
"socionext,uniphier-ld20-reset" - for LD20 SoC
+ "socionext,uniphier-pxs3-reset" - for PXs3 SoC
- #reset-cells: should be 1.
Example:
@@ -44,6 +45,7 @@ Required properties:
"socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO)
"socionext,uniphier-ld11-sd-reset" - for LD11 SoC (SD)
"socionext,uniphier-ld20-sd-reset" - for LD20 SoC
+ "socionext,uniphier-pxs3-sd-reset" - for PXs3 SoC
- #reset-cells: should be 1.
Example:
@@ -74,6 +76,7 @@ Required properties:
"socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC
"socionext,uniphier-ld11-peri-reset" - for LD11 SoC
"socionext,uniphier-ld20-peri-reset" - for LD20 SoC
+ "socionext,uniphier-pxs3-peri-reset" - for PXs3 SoC
- #reset-cells: should be 1.
Example:
diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-uniphier.c
index bda2dd1..6ed808d 100644
--- a/drivers/reset/reset-uniphier.c
+++ b/drivers/reset/reset-uniphier.c
@@ -114,6 +114,20 @@ static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
UNIPHIER_RESET_END,
};
+static const struct uniphier_reset_data uniphier_pxs3_sys_reset_data[] = {
+ UNIPHIER_RESETX(2, 0x200c, 0), /* NAND */
+ UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */
+ UNIPHIER_RESETX(8, 0x200c, 12), /* STDMAC */
+ UNIPHIER_RESETX(12, 0x200c, 4), /* USB30 link (GIO0) */
+ UNIPHIER_RESETX(13, 0x200c, 5), /* USB31 link (GIO1) */
+ UNIPHIER_RESETX(16, 0x200c, 16), /* USB30-PHY0 */
+ UNIPHIER_RESETX(17, 0x200c, 18), /* USB30-PHY1 */
+ UNIPHIER_RESETX(18, 0x200c, 20), /* USB30-PHY2 */
+ UNIPHIER_RESETX(20, 0x200c, 17), /* USB31-PHY0 */
+ UNIPHIER_RESETX(21, 0x200c, 19), /* USB31-PHY1 */
+ UNIPHIER_RESET_END,
+};
+
/* Media I/O reset data */
#define UNIPHIER_MIO_RESET_SD(id, ch) \
UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 0)
@@ -359,6 +373,10 @@ static const struct of_device_id uniphier_reset_match[] = {
.compatible = "socionext,uniphier-ld20-reset",
.data = uniphier_ld20_sys_reset_data,
},
+ {
+ .compatible = "socionext,uniphier-pxs3-reset",
+ .data = uniphier_pxs3_sys_reset_data,
+ },
/* Media I/O reset, SD reset */
{
.compatible = "socionext,uniphier-ld4-mio-reset",
@@ -392,6 +410,10 @@ static const struct of_device_id uniphier_reset_match[] = {
.compatible = "socionext,uniphier-ld20-sd-reset",
.data = uniphier_pro5_sd_reset_data,
},
+ {
+ .compatible = "socionext,uniphier-pxs3-sd-reset",
+ .data = uniphier_pro5_sd_reset_data,
+ },
/* Peripheral reset */
{
.compatible = "socionext,uniphier-ld4-peri-reset",
@@ -421,6 +443,10 @@ static const struct of_device_id uniphier_reset_match[] = {
.compatible = "socionext,uniphier-ld20-peri-reset",
.data = uniphier_pro4_peri_reset_data,
},
+ {
+ .compatible = "socionext,uniphier-pxs3-peri-reset",
+ .data = uniphier_pro4_peri_reset_data,
+ },
/* Analog signal amplifiers reset */
{
.compatible = "socionext,uniphier-ld11-adamv-reset",
--
2.7.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] reset: uniphier: add PXs3 reset data
[not found] ` <1507170657-26432-1-git-send-email-yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
@ 2017-10-05 8:30 ` Philipp Zabel
0 siblings, 0 replies; 2+ messages in thread
From: Philipp Zabel @ 2017-10-05 8:30 UTC (permalink / raw)
To: Masahiro Yamada
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Rob Herring, Mark Rutland,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On Thu, 2017-10-05 at 11:30 +0900, Masahiro Yamada wrote:
> Add basic reset data for Socionext's new SoC PXs3.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
Thanks, applied to the reset/next branch.
regards
Philipp
> ---
>
> .../devicetree/bindings/reset/uniphier-reset.txt | 3 +++
> drivers/reset/reset-uniphier.c | 26
> ++++++++++++++++++++++
> 2 files changed, 29 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/reset/uniphier-
> reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
> index 68a6f48..93efed6 100644
> --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
> +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
> @@ -13,6 +13,7 @@ Required properties:
> "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC
> "socionext,uniphier-ld11-reset" - for LD11 SoC
> "socionext,uniphier-ld20-reset" - for LD20 SoC
> + "socionext,uniphier-pxs3-reset" - for PXs3 SoC
> - #reset-cells: should be 1.
>
> Example:
> @@ -44,6 +45,7 @@ Required properties:
> "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO)
> "socionext,uniphier-ld11-sd-reset" - for LD11 SoC (SD)
> "socionext,uniphier-ld20-sd-reset" - for LD20 SoC
> + "socionext,uniphier-pxs3-sd-reset" - for PXs3 SoC
> - #reset-cells: should be 1.
>
> Example:
> @@ -74,6 +76,7 @@ Required properties:
> "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC
> "socionext,uniphier-ld11-peri-reset" - for LD11 SoC
> "socionext,uniphier-ld20-peri-reset" - for LD20 SoC
> + "socionext,uniphier-pxs3-peri-reset" - for PXs3 SoC
> - #reset-cells: should be 1.
>
> Example:
> diff --git a/drivers/reset/reset-uniphier.c b/drivers/reset/reset-
> uniphier.c
> index bda2dd1..6ed808d 100644
> --- a/drivers/reset/reset-uniphier.c
> +++ b/drivers/reset/reset-uniphier.c
> @@ -114,6 +114,20 @@ static const struct uniphier_reset_data
> uniphier_ld20_sys_reset_data[] = {
> UNIPHIER_RESET_END,
> };
>
> +static const struct uniphier_reset_data
> uniphier_pxs3_sys_reset_data[] = {
> + UNIPHIER_RESETX(2, 0x200c, 0), /* NAND */
> + UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */
> + UNIPHIER_RESETX(8, 0x200c, 12), /* STDMAC */
> + UNIPHIER_RESETX(12, 0x200c, 4), /* USB30 link
> (GIO0) */
> + UNIPHIER_RESETX(13, 0x200c, 5), /* USB31 link
> (GIO1) */
> + UNIPHIER_RESETX(16, 0x200c, 16), /* USB30-PHY0 */
> + UNIPHIER_RESETX(17, 0x200c, 18), /* USB30-PHY1 */
> + UNIPHIER_RESETX(18, 0x200c, 20), /* USB30-PHY2 */
> + UNIPHIER_RESETX(20, 0x200c, 17), /* USB31-PHY0 */
> + UNIPHIER_RESETX(21, 0x200c, 19), /* USB31-PHY1 */
> + UNIPHIER_RESET_END,
> +};
> +
> /* Media I/O reset data */
> #define UNIPHIER_MIO_RESET_SD(id, ch) \
> UNIPHIER_RESETX((id), 0x110 + 0x200 * (ch), 0)
> @@ -359,6 +373,10 @@ static const struct of_device_id
> uniphier_reset_match[] = {
> .compatible = "socionext,uniphier-ld20-reset",
> .data = uniphier_ld20_sys_reset_data,
> },
> + {
> + .compatible = "socionext,uniphier-pxs3-reset",
> + .data = uniphier_pxs3_sys_reset_data,
> + },
> /* Media I/O reset, SD reset */
> {
> .compatible = "socionext,uniphier-ld4-mio-reset",
> @@ -392,6 +410,10 @@ static const struct of_device_id
> uniphier_reset_match[] = {
> .compatible = "socionext,uniphier-ld20-sd-reset",
> .data = uniphier_pro5_sd_reset_data,
> },
> + {
> + .compatible = "socionext,uniphier-pxs3-sd-reset",
> + .data = uniphier_pro5_sd_reset_data,
> + },
> /* Peripheral reset */
> {
> .compatible = "socionext,uniphier-ld4-peri-reset",
> @@ -421,6 +443,10 @@ static const struct of_device_id
> uniphier_reset_match[] = {
> .compatible = "socionext,uniphier-ld20-peri-reset",
> .data = uniphier_pro4_peri_reset_data,
> },
> + {
> + .compatible = "socionext,uniphier-pxs3-peri-reset",
> + .data = uniphier_pro4_peri_reset_data,
> + },
> /* Analog signal amplifiers reset */
> {
> .compatible = "socionext,uniphier-ld11-adamv-reset",
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-10-05 8:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-10-05 2:30 [PATCH] reset: uniphier: add PXs3 reset data Masahiro Yamada
[not found] ` <1507170657-26432-1-git-send-email-yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
2017-10-05 8:30 ` Philipp Zabel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).