From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sergei Shtylyov Subject: [PATCH] ARM: shmobile: porter: add Ether DT support Date: Tue, 06 Oct 2015 01:51:01 +0300 Message-ID: <1507520.6rxyDiKYNB@wasted.cogentembedded.com> References: <201404250239.39150.sergei.shtylyov@cogentembedded.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7Bit Return-path: In-Reply-To: <201404250239.39150.sergei.shtylyov@cogentembedded.com> Sender: linux-sh-owner@vger.kernel.org To: horms@verge.net.au, linux-sh@vger.kernel.org, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, devicetree@vger.kernel.org Cc: magnus.damm@gmail.com, linux@arm.linux.org.uk, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Define the Porter board dependent part of the Ether device node. Enable DHCP and NFS root for the kernel booting. This patch is analogous to the commit 26b0d2cf73cb (ARM: shmobile: henninger: add Ether DT support) as there are no differences between those boards in this respect. Signed-off-by: Sergei Shtylyov --- This patch is against the 'renesas-devel-20151005-v4.3-rc4' tag of Simon Horman's 'renesas.git' repo. arch/arm/boot/dts/r8a7791-porter.dts | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts +++ renesas/arch/arm/boot/dts/r8a7791-porter.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = &scif0; }; @@ -44,6 +44,16 @@ renesas,groups = "scif0_data_d"; renesas,function = "scif0"; }; + + ether_pins: ether { + renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; + renesas,function = "eth"; + }; + + phy1_pins: phy1 { + renesas,groups = "intc_irq0"; + renesas,function = "intc"; + }; }; &scif0 { @@ -52,3 +62,19 @@ status = "okay"; }; + +ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "ok"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc0>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +};