From: Dan Haab <riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: "Rafał Miłecki" <zajec5-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"Hauke Mehrtens" <hauke-5/S+JYg5SzeELgA04lAiVw@public.gmane.org>,
"Jon Mason" <jonmason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org,
"Rob Herring" <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Mark Rutland" <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
"Russell King" <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Dan Haab" <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500
Date: Mon, 9 Oct 2017 09:46:23 -0600 [thread overview]
Message-ID: <1507563983-7354-2-git-send-email-riproute@gmail.com> (raw)
In-Reply-To: <1507563983-7354-1-git-send-email-riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
From: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org>
This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports
board design.
Signed-off-by: Dan Haab <dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 63 +++++++++++++++++++++++++++
2 files changed, 64 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 563f8a4..2d964c9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -100,6 +100,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4709-tplink-archer-c9-v1.dtb \
bcm47094-dlink-dir-885l.dtb \
bcm47094-linksys-panamera.dtb \
+ bcm47094-luxul-abr-4500.dtb \
bcm47094-luxul-xbr-4500.dtb \
bcm47094-luxul-xwr-3100.dtb \
bcm47094-netgear-r8500.dtb \
diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
new file mode 100644
index 0000000..ecd22a2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+ model = "Luxul ABR-4500 V1";
+
+ chosen {
+ bootargs = "earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000
+ 0x88000000 0x18000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "bcm53xx:green:status";
+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ usb3 {
+ label = "bcm53xx:green:usb3";
+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>;
+ linux,default-trigger = "usbport";
+ };
+
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+ status = "okay";
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-10-09 15:46 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-09 15:46 [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500 Dan Haab
[not found] ` <1507563983-7354-1-git-send-email-riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-10-09 15:46 ` Dan Haab [this message]
[not found] ` <1507563983-7354-2-git-send-email-riproute-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-10-09 16:51 ` [PATCH 2/2] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500 Rafał Miłecki
2017-10-09 19:44 ` Florian Fainelli
2017-10-09 16:50 ` [PATCH 1/2] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500 Rafał Miłecki
2017-10-09 19:44 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1507563983-7354-2-git-send-email-riproute@gmail.com \
--to=riproute-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dhaab-RSK6WAzFx3QAvxtiuMwx3w@public.gmane.org \
--cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=hauke-5/S+JYg5SzeELgA04lAiVw@public.gmane.org \
--cc=jonmason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org \
--cc=linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=zajec5-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).