From: Todor Tomov <todor.tomov@linaro.org>
To: wsa@the-dreams.de, linux-i2c@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
Todor Tomov <todor.tomov@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org
Subject: [PATCH v2 1/4] dt-bindings: media: Binding document for Qualcomm Camera Control Interface driver
Date: Fri, 13 Oct 2017 13:56:40 +0300 [thread overview]
Message-ID: <1507892203-17033-2-git-send-email-todor.tomov@linaro.org> (raw)
In-Reply-To: <1507892203-17033-1-git-send-email-todor.tomov@linaro.org>
Add DT binding document for Qualcomm Camera Control Interface driver
CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: devicetree@vger.kernel.org
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
---
.../devicetree/bindings/i2c/i2c-qcom-cci.txt | 46 ++++++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
new file mode 100644
index 0000000..cb1fe15
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
@@ -0,0 +1,46 @@
+Qualcomm Camera Control Interface controller
+
+Required properties:
+ - compatible: Should be one of:
+ - "qcom,cci-v1.0.8" for 8916;
+ - "qcom,cci-v1.4.0" for 8996.
+ - #address-cells: Should be <1>.
+ - #size-cells: Should be <0>.
+ - reg: Base address of the controller and length of memory mapped region.
+ - interrupts: Specifier for CCI interrupt.
+ - clocks: List of clock specifiers, one for each entry in clock-names.
+ - clock-names: Should contain:
+ - "mmss_mmagic_ahb" - on 8996 only;
+ - "camss_top_ahb";
+ - "cci_ahb";
+ - "cci";
+ - "camss_ahb".
+
+Required properties on 8996:
+ - power-domains: Power domain specifier.
+
+Optional:
+ - clock-frequency: Desired I2C bus clock frequency in Hz, defaults to 100 kHz
+ if omitted.
+
+Example:
+
+ cci@a0c000 {
+ compatible = "qcom,cci-v1.4.0";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xa0c000 0x1000>;
+ interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&mmcc CAMSS_GDSC>;
+ clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>,
+ <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_CCI_AHB_CLK>,
+ <&mmcc CAMSS_CCI_CLK>,
+ <&mmcc CAMSS_AHB_CLK>;
+ clock-names = "mmss_mmagic_ahb",
+ "camss_top_ahb",
+ "cci_ahb",
+ "cci",
+ "camss_ahb";
+ clock-frequency = <400000>;
+ };
--
2.7.4
next parent reply other threads:[~2017-10-13 10:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1507892203-17033-1-git-send-email-todor.tomov@linaro.org>
2017-10-13 10:56 ` Todor Tomov [this message]
2017-10-17 22:21 ` [PATCH v2 1/4] dt-bindings: media: Binding document for Qualcomm Camera Control Interface driver Rob Herring
2017-10-13 10:56 ` [PATCH v2 4/4] arm64: dts: qcom: Add Camera Control Interface support Todor Tomov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1507892203-17033-2-git-send-email-todor.tomov@linaro.org \
--to=todor.tomov@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).