From: "Lothar Waßmann" <LW@KARO-electronics.de>
To: Fabio Estevam <fabio.estevam@nxp.com>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Russell King <linux@armlinux.org.uk>,
Sascha Hauer <kernel@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: "Lothar Waßmann" <LW@KARO-electronics.de>
Subject: [PATCHv3 01/12] ARM: dts: imx6-tx6: update model property to match current module HW revision
Date: Tue, 17 Oct 2017 11:17:52 +0200 [thread overview]
Message-ID: <1508231883-12067-2-git-send-email-LW@KARO-electronics.de> (raw)
In-Reply-To: <1508231883-12067-1-git-send-email-LW@KARO-electronics.de>
The current TX6Q module HW revision is 3 reflected in the module name
suffix '-1030' (-1130 for LVDS).
Change the model string to prevent confusion about what DTS file to
use for these modules.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
arch/arm/boot/dts/imx6q-tx6q-1010.dts | 4 ++--
arch/arm/boot/dts/imx6q-tx6q-1110.dts | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
index e14e6be..17ff7e7 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -44,7 +44,7 @@
#include "imx6qdl-tx6.dtsi"
/ {
- model = "Ka-Ro electronics TX6Q-1010 Module";
+ model = "Ka-Ro electronics TX6Q-1010/-1030 Module";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
aliases {
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
index 0433e22..0f5e638 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
@@ -1,5 +1,5 @@
/*
- * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -44,7 +44,7 @@
#include "imx6qdl-tx6.dtsi"
/ {
- model = "Ka-Ro electronics TX6Q-1110 Module";
+ model = "Ka-Ro electronics TX6Q-1110/-1130 Module";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
aliases {
--
2.1.4
next prev parent reply other threads:[~2017-10-17 9:17 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-17 8:53 [PATCHv2 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann
2017-10-17 8:53 ` [PATCH 01/12] ARM: dts: imx6-tx6: update model property to match current module HW revision Lothar Waßmann
2017-10-17 8:53 ` [PATCH 02/12] ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts Lothar Waßmann
2017-10-17 8:53 ` [PATCH 03/12] ARM: dts: imx6-tx6: remove obsolete ipu1 alias Lothar Waßmann
[not found] ` <1508230414-8090-1-git-send-email-LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
2017-10-17 8:53 ` [PATCH 04/12] ARM: dts: imx6-tx6: add trickle-charge config for DS1339 Lothar Waßmann
2017-10-17 8:53 ` [PATCH 09/12] ARM: dts: imx6-tx6: move display configuration to .dtsi file Lothar Waßmann
2017-10-17 8:53 ` [PATCH 05/12] ARM: dts: imx6-tx6: improve ethernet related pinctrl setup Lothar Waßmann
2017-10-17 8:53 ` [PATCH 06/12] ARM: dts: imx6-tx6: specify ethernet phy reset post-delay Lothar Waßmann
2017-10-17 8:53 ` [PATCH 07/12] ARM: dts: imx6-tx6: convert to using simple-audio-card Lothar Waßmann
2017-10-17 8:53 ` [PATCH 08/12] ARM: dts: imx6-tx6: add support for I2C bus recovery Lothar Waßmann
2017-10-17 8:53 ` [PATCH 10/12] ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard Lothar Waßmann
2017-10-17 8:53 ` [PATCH 11/12] ARM: dts: imx: add support for TX6QP Lothar Waßmann
2017-10-17 8:53 ` [PATCH 12/12] ARM: dts: imx: add support for TX6 modules on MB7 baseboard Lothar Waßmann
2017-10-17 9:17 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Lothar Waßmann
2017-10-17 9:17 ` Lothar Waßmann [this message]
2017-10-17 9:17 ` [PATCHv3 02/12] ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts Lothar Waßmann
2017-10-17 9:17 ` [PATCHv3 03/12] ARM: dts: imx6-tx6: remove obsolete ipu1 alias Lothar Waßmann
2017-10-17 9:17 ` [PATCHv3 04/12] ARM: dts: imx6-tx6: add trickle-charge config for DS1339 Lothar Waßmann
2017-10-17 9:17 ` [PATCHv3 05/12] ARM: dts: imx6-tx6: improve ethernet related pinctrl setup Lothar Waßmann
2017-10-17 9:17 ` [PATCHv3 06/12] ARM: dts: imx6-tx6: specify ethernet phy reset post-delay Lothar Waßmann
[not found] ` <1508231883-12067-1-git-send-email-LW-bxm8fMRDkQLDiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org>
2017-10-17 9:17 ` [PATCHv3 07/12] ARM: dts: imx6-tx6: convert to using simple-audio-card Lothar Waßmann
2017-10-17 9:18 ` [PATCHv3 09/12] ARM: dts: imx6-tx6: move display configuration to .dtsi file Lothar Waßmann
2017-10-18 3:06 ` [PATCHv3 00/12] ARM: dts: imx6: Update dts files for the Ka-Ro TX6 module series Shawn Guo
2017-10-17 9:17 ` [PATCHv3 08/12] ARM: dts: imx6-tx6: add support for I2C bus recovery Lothar Waßmann
2017-10-17 9:18 ` [PATCHv3 10/12] ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard Lothar Waßmann
2017-10-17 9:18 ` [PATCHv3 11/12] ARM: dts: imx: add support for TX6QP Lothar Waßmann
2017-10-17 9:18 ` [PATCHv3 12/12] ARM: dts: imx: add support for TX6 modules on MB7 baseboard Lothar Waßmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1508231883-12067-2-git-send-email-LW@KARO-electronics.de \
--to=lw@karo-electronics.de \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).